Matador Texas Directional Boring: Miles Fine Sandy Loam, US 62 and Longs Branch
Quick Answer: Can we get a line beneath US 62 without cutting its pavement? Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Matador, Texas, for routes beneath US 62. Matador is 281 road miles from our Yukon, Oklahoma, main office, and Main Street gives us a local route to plan around. USDA maps show sandy clay loam at about 40 inches across 92 percent of town; that clay can grip pipe, so we control fluid and ream in stages.
Matador bores at a glance
- County seat of Motley County, Texas. Population 540 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 281 miles, about 5.5 hours of driving.
- Ground: Miles soil is mapped on 66 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 62, US 70, FM 94 and Texas State Highway 70. State permit office: TxDOT Childress District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Matador, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring under US 62 in Matador?
Trinity Boring Solutions takes directional boring work in Matador, Texas, including routes beneath US 62 where pavement needs to stay intact. Can we bore beneath Main Street in Matador without cutting the road? For a Matador route, we plan the bore to leave the surface uncut. The Census Bureau Vintage 2024 estimate puts Motley County seat Matador at 540 people. We install water, sewer, gas, electric conduit and fiber along routes such as Main Street.
Our main office is in Yukon, Oklahoma, and Matador work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa. Beside that river crossing, a Matador job near Main Street is planned around its own route, ground and line size. Our family business began in 1965, and we have done directional boring since 1982, knowledge we apply when planning Matador crossings on US 62.

What does the soil survey show about Miles soil in Matador?
The USDA soil survey maps Miles soil across 66 percent of Matador, with Motley soil at 27 percent and Yomont at 7 percent. Fine sandy loam covers 54 percent of the mapped area at the surface, while loam covers 27 percent and loamy fine sand 12 percent. At about 40 inches, sandy clay loam is mapped under 92 percent of town. The survey also maps an average clay content of 27 percent at that depth. These are mapped patterns, not test borings, so the actual route still needs field checks.
| USDA soil survey, inside the Matador city limits | What is mapped |
|---|---|
| Soil series mapped | Miles 66 percent, Motley 27 percent and Yomont 7 percent |
| Texture at the surface | fine sandy loam 54 percent, loam 27 percent and loamy fine sand 12 percent |
| Texture about 40 inches down | sandy clay loam 92 percent and very fine sandy loam 7 percent |
| Engineering class about 40 inches down | clayey sand (SC) 54 percent, lean clay (CL) 38 percent and silt (ML) 7 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 7 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
In Matador, bedrock is not mapped within the top five feet, though the geologic map shows Lingos Formation of Pleistocene age and Late Permian sedimentary rock. The map does not rule out deeper rock, so a bore plan should allow for changing ground. Seasonal water tables are not mapped within 60 inches. Flood prone soils cover 7 percent of the mapped area, including ground where Longs Branch is close to town; a creek route needs depth planning. No high steel corrosion risk is mapped, but the line owner chooses materials for casing and tracer wire.
How do we drill Matador’s fine sandy loam, not sandy clay loam?
Matador’s mapped sandy clay loam can hold a bore while its clay grips the reamer or pipe. We tune the drilling fluid and reaming sequence to the route, including any Main Street pavement.
- Miles soil is widely mapped in Matador, and sandy clay loam is common at about 40 inches; we adjust fluid and ream in stages to manage clay grip.
- At a Main Street crossing, we track the drill head from the surface and record depth and pitch so the bore stays on its planned line.
- Before drilling near marked utilities along older Pipkin Street blocks, we use hydrovac potholing to expose each line and check its depth.
- Near Longs Branch, we plan the bore depth beneath the channel and check whether the crossing falls within federal waterway jurisdiction.

What is in the way of a new line near Main Street in Matador?
US 62 and US 70 each have 1.5 mapped roadway miles inside Matador, while FM 94 has 1.0 and Texas State Highway 70 has 0.9. A line under one of these state or US highways needs a planned crossing that keeps the pavement intact. Main Street is the longest named street at 1.41 miles in town. Bundy Street runs 1.34 miles, and Pipkin Street runs 1.1 miles, giving a project several local street routes to consider.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 62 | US highway | 1.5 roadway miles inside | State highway office |
| US 70 | US highway | 1.5 roadway miles inside | State highway office |
| FM 94 | State highway | 1 roadway miles inside | State highway office |
| Texas State Highway 70 | State highway | 0.9 roadway miles inside | State highway office |
| Longs Branch | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Ballard Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Matador or within one mile outside its limits, and none of the mapped street crossings is a rail crossing. There are no named streams inside town, but Longs Branch and Ballard Creek are each 0.1 miles from the city limits. The map shows 1.84 miles of unnamed drainage within town and no mapped street crossings of named streams. A route near Longs Branch needs creek conditions checked during planning.
Who has to sign off on a bore in Motley County and Matador?
For a bore under US 62, US 70, FM 94 or Texas State Highway 70 in Matador, the line owner files the TxDOT utility application in RULIS, not the drilling contractor. The TxDOT Childress District reviews it. We prepare the bore plan and profile for the line owner and work under its permit. TxDOT cover rules call for 60 inches at highway crossings for electric and communication lines, 60 inches for water crossings, and 60 inches for pressurized sewer crossings; the permit may set another depth. Matador’s incorporated city streets belong to the city itself. Any route near Longs Branch is checked for federal waterway jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground near the City of Matador system?
The City of Matador public water system uses groundwater wells and lists 406 service connections serving 578 people. Those figures make it useful to identify the water route before planning a nearby service bore. AEP Texas North, Southwestern Public Service, Lighthouse Electric Cooperative and South Plains Electric Cooperative report electric service in Motley County. We confirm the line owner for the specific address before planning an electric conduit bore near Pipkin Street.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Matador | Public water system | Groundwater wells | 406 connections, 578 people served |
| AEP Texas North, Southwestern Public Service, Lighthouse Electric Cooperative and South Plains Electric Cooperative | Electric utilities reporting service in Motley County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put Matador’s median housing year at 1953; 60 percent of housing was built before 1960, 34 percent from 1960 to 1999 and 6 percent in 2000 or later. Along older streets such as Scotch Street, a replacement route may encounter existing buried lines, while a new service still needs a clear path. We hydrovac pothole marked utilities on the bore path before drilling near them, since locate paint shows position, not depth.

How far is Matador from Turkey and our Yukon office?
Matador is in Motley County, where it also serves as the county seat, at an elevation of 2,369 feet. The incorporated town covers 1.3 square miles and uses ZIP code 79244. Roaring Springs is 8.3 miles south; Turkey is 26.5 miles north; and Dickens is 27.2 miles south. Childress, the nearest larger city listed, is 42.3 miles northeast. From our Yukon, Oklahoma, main office, Matador is 281 road miles away and about a 5.5 hour drive, which affects crew mobilization for a Main Street project.
Places near Matador
- Directional boring in Roaring Springs: 8.3 miles south
- Directional boring in Turkey: 26.5 miles north
- Directional boring in Dickens: 27.2 miles south
- Directional boring in Quitaque: 27.8 miles northwest
- Directional boring in Floydada: 29.6 miles west
- Directional boring in Childress: 42.3 miles northeast
Which jobs call for a bore near Pipkin Street in Matador?
- Highway crossing: A route under US 62 or US 70 needs a bore planned to pass beneath highway pavement without an open cut.
- Water service: A service near the City of Matador system can be routed beneath Main Street after the existing lines are exposed.
- Fiber conduit: A conduit run along Pipkin Street can avoid cutting pavement and sidewalks by placing entry and exit pits off the traveled surface.
- Creek crossing: A bore near Longs Branch needs a planned path beneath the channel and a check of waterway jurisdiction.
- Electric conduit: A route near Scotch Street starts with confirming the line owner because several utilities report electric service in Motley County.
- Street service: A line beneath Bundy Street can use directional boring to keep the road surface intact while crossing the route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Matador quote near Scotch Street?
For a Matador quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Scotch Street is easier to assess when the crossing points and pavement are marked. We can then review the route, access and likely potholing needs before setting the work scope.
The price follows the job details, including bore length, line size, soil, crossings, pavement, pits and mobilization. Miles fine sandy loam and sandy clay loam matter because clay can grip pipe and require staged reaming. A crossing beneath US 62 needs highway planning, while a route near Longs Branch brings drainage conditions into view. Matador’s 281 road miles from Yukon also affect mobilization. Concrete, excavator time, sand backfill and emergency timing can change the work required.
Questions people ask about boring in Matador
Does Trinity take directional boring jobs in Matador and Motley County?
Yes, Trinity Boring Solutions takes directional boring work in Matador and across Texas. Our crews handle the work, including jobs planned beneath routes such as US 62, and partner drilling contractors we have vetted provide satellite yard support. We guide you from the first call through the bore log, coordinating TxDOT Childress District permit steps regardless of which crew is on site.
What ground should I expect for a Matador bore through Miles soil?
Miles soil covers 66 percent of Matador, and the USDA soil survey maps sandy clay loam at about 40 inches under 92 percent of town. That clay can hold the hole but grip the reamer or pipe. Mapped soil is not a site test, so a route near Main Street still needs field review.
Will a bore in Matador hit rock below the surface?
The soil map does not show bedrock within the top five feet of Matador, but that does not rule out deeper rock. The geologic map identifies Lingos Formation of Pleistocene age and Late Permian sedimentary rock. A bore near Longs Branch should be planned for changing ground rather than assuming one material continues at depth.
Who approves a Matador bore under US 62?
The owner of the utility line applies for a TxDOT utility permit in RULIS for work in the US 62 right of way. The TxDOT Childress District reviews the application, and we provide the bore plan and profile for the owner’s filing. A highway crossing plan must address the required cover and pavement protection.
Can a line be bored under Longs Branch near Matador?
A bore can be planned beneath Longs Branch, which is mapped 0.1 miles from Matador’s limits. The route needs to pass under the channel, and planning checks whether the crossing is within U.S. Army Corps of Engineers jurisdiction. The ground and access at the actual crossing determine the bore design.
Who runs Matador’s public water system in Motley County, and where is its source?
The City of Matador owns the public water system, which uses groundwater wells. Public system records list 406 service connections serving 578 people. If your proposed line is near Main Street, identifying the existing water route helps us plan where marked utilities need to be exposed before drilling.
Can I reach Trinity after hours about an urgent bore near Pipkin Street in Matador?
Yes, you can call (405) 409-7423 at any hour, including for urgent work near Pipkin Street. A person answers the phone 24 hours a day, and Trinity provides emergency response. Share the Matador location and the line or crossing involved so we can understand the immediate scope.
How much notice does Texas811 need for a Matador bore near Main Street?
The excavator or contractor makes the Texas811 locate request and describes the planned bore path, such as a route along Main Street. Texas law requires notice at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, submit a new request; refresh marks that wear off or move before work continues.
What affects the cost of a Matador directional bore beneath US 62?
The job scope sets the price, not the highway name alone. Length, pipe size, sandy clay loam, exposed utilities, pavement, pits and equipment time all matter. A US 62 crossing adds highway planning, and Matador’s 281 road miles from Yukon affect mobilization. A route near Longs Branch may also need extra planning for drainage.
Where the Matador facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Matador
- U.S. Census Bureau, TIGER/Line 2024: Matador boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Matador
- U.S. Census Bureau, American Community Survey 2019 to 2023: Matador housing units and year built
- Macrostrat geologic map compilation: map units under Matador
- U.S. EPA Safe Drinking Water Information System: public water systems serving Matador
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Motley County
- U.S. Geological Survey, Elevation Point Query Service: Matador elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Matador
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Matador
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Matador, Texas
Type the address of your job in Matador. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Matador
All counties: Texas county list.
