trinityboringsolutions.com

Sunset Texas Directional Boring: Windthorst Soil, US 287 and Brushy Creek

Quick Answer: Windthorst soil around Brushy Creek can make a bore sticky, so Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Sunset, Texas, including crossings near US 287. Sunset is 164 road miles from our Yukon, Oklahoma main office, with Front Street among the local route considerations. The USDA soil survey maps sandy clay loam at 40 inches across 32 percent of the area, and clay can grip the pipe. We plan the reaming and fluid for those Sunset ground conditions.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Sunset bores at a glance

  • Unincorporated community in Montague County, Texas. Population 543 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 164 miles, about 3.6 hours of driving.
  • Ground: Windthorst soil is mapped on 41 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 20 percent of the area.
  • Highways inside the boundary: US 287, US 81, Texas State Highway 101, FM 1749 and Spur 511. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: BNSF Railway, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Brushy Creek and Big Sandy Creek.
  • Public water: Sunset Water System, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near US 287 in Sunset?

Trinity Boring Solutions takes directional boring work in Sunset, Montague County, where the 2020 Census count was 543 people; the Census Bureau does not publish yearly estimates for unincorporated places. Along Front Street or near US 287, we can bore water, sewer, gas, electric conduit and fiber lines to keep pavement and driveways intact. The route and utility crossings determine the bore plan.

Our main office is in Yukon, Oklahoma, and Sunset work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. At the small end, a 3/4 inch service line along Bryan Road is a different scope from a large casing plan near BNSF Railway. We handle lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. When planning directional boring in Sunset, we draw on our family business history dating to 1965 and experience since 1982.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Sunset Windthorst soil create?

Windthorst is the leading mapped soil series in Sunset, covering 41 percent of the area, and Windthorst fine sandy loam appears on the USDA soil survey. At about 40 inches below the surface, the survey maps sandy clay loam under 32 percent of the area and clay under 20 percent; average clay content at that depth is 37 percent. We treat Sunset’s mapped soil patterns as planning context, not test borings that confirm conditions along a bore path. Clay can cling to a reamer and grip pipe, so the ground along Bryan Road may call for staged reaming and a fluid mix suited to the soil.

USDA soil survey, inside the Sunset mapped community boundaryWhat is mapped
Soil series mappedWindthorst 41 percent, Cona 21 percent, Chaney 15 percent, Pulexas 7 percent and Duffau 7 percent
Texture at the surfacefine sandy loam 52 percent, stony sandy loam 21 percent and loamy sand 15 percent
Texture about 40 inches downsandy clay loam 32 percent, channery clay 21 percent and clay 20 percent
Engineering class about 40 inches downlean clay (CL) 71 percent, fat clay (CH) 21 percent and silty clay (CL ML) 7 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inches20 percent of the area (0 percent hard rock, 20 percent weathered rock)
Seasonal water table within 60 inches1 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel43 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches in 20 percent of Sunset, with a typical depth of 49 inches; hard bedrock is not mapped in that interval. Seasonal water tables are mapped within 40 inches in 1 percent, while flood prone soils cover 9 percent, so Brushy Creek routes need careful depth planning. High steel corrosion risk is mapped across 43 percent, a consideration for steel casing and tracer wire that the line owner can address through material choices. The map units include Quartz Sand Decomposition Residuum of Cenozoic age and Antlers Sand of Early Cretaceous age.

What does it take to bore Sunset sandy clay loam?

For Sunset sandy clay loam, we match the drilling fluid and reaming sequence to the clay at about 40 inches. That helps manage sticky cuttings along Bryan Road and other mapped routes.

  1. Windthorst clay can cling to the reamer, so we use a thinner fluid with polymer and ream in stages along Sunset routes.
  2. Where clay grips the pipe, we coordinate the final ream and pull so the line is ready to enter the open hole the same day.
  3. Near Brushy Creek, we plan the bore depth below the channel and check the crossing for federal waterway jurisdiction.
  4. Before drilling near US 287 or Bryan Road, we expose marked utilities by hydrovac; surface paint shows position, not depth.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

Where does a line have to go under Front Street in Sunset?

Sunset has US 287, US 81, Texas State Highway 101, FM 1749 and Spur 511 inside the mapped community boundary, so a route can involve state or federal highway right of way. Front Street runs 2.02 miles inside the community; Proctor Lane and Bryan Road are also among the longer named streets. Boring can keep a line below pavement rather than opening a trench through it. For a highway crossing, the plan must account for the road owner and the line type.

CrossingTypeMapped extentWho has a say
US 287US highway3.8 roadway miles insideState highway office
US 81US highway3.8 roadway miles insideState highway office
Texas State Highway 101State highway2.8 roadway miles insideState highway office
FM 1749State highway1.4 roadway miles insideState highway office
Spur 511State highway1.1 roadway miles insideState highway office
BNSF RailwayRailroad2.15 track miles insideThe railroad
Brushy CreekStream3.85 channel miles insideChecked for Corps of Engineers jurisdiction
Big Sandy CreekStream0.23 channel miles insideChecked for Corps of Engineers jurisdiction
Cattail HollowStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Turkey CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Middle CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway owns 2.15 track miles inside Sunset, and public mapping shows 2 street and rail crossings. A rail bore needs the railroad owner’s crossing agreement, which sets the crossing conditions. Brushy Creek runs 3.85 channel miles here, and mapped street crossings of named streams total 5; Big Sandy Creek adds 0.23 channel miles. Our map shows no lakes or ponds within one mile of Sunset, so it indicates no mapped water crossings there. Creek routes need depth planning and a check for federal waterway jurisdiction.

Who approves a bore in Sunset and Montague County?

Sunset has no city government, so a local street such as Bryan Road falls to the applicable county road authority, while US 287 and the other named highways are state routes. TxDOT Wichita Falls District reviews utility work in state highway right of way. The utility owner, not the boring contractor, submits the application through TxDOT’s RULIS system; we prepare the bore plan and profile for that filing. At a highway crossing, electric, communication and water lines need 60 inches of cover below the lowest crossed grade, and pressurized sewer lines also need 60 inches. BNSF Railway sets its own crossing agreement, and Brushy Creek is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near Sunset Water System lines?

Sunset Water System is privately owned, uses groundwater wells, and serves 570 people through 190 service connections. In Montague County, electric service is reported by Oncor Electric Delivery Company, Texas New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric Cooperative. Those reports do not identify the provider at every Bryan Road address, so we confirm the electric line owner before planning a conduit bore.

Line ownerWhat it isSourceSize
Sunset Water SystemPublic water systemGroundwater wells190 connections, 570 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric CooperativeElectric utilities reporting service in Montague CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Sunset’s median housing year at 2008; 90 percent of housing units were built in 2000 or later and 10 percent from 1960 to 1999. That newer housing pattern can mean new service routes as well as line replacements near Sunset Water System connections. Before a drill approaches marked lines, we hydrovac pothole them to check their depth. This matters near both the water system and electric lines reported in Montague County.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover Sunset and nearby Alvord?

Sunset is in Montague County, at an elevation of 982 feet, and covers 4.94 square miles within its mapped community boundary. Its ZIP code is 76270. Alvord is 7.4 miles southeast, while Bowie is 8.9 miles northwest and is the nearest larger city. The county seat, Montague, is 15.3 miles north. Sunset is 164 road miles and a 3.6 hour drive from our Yukon, Oklahoma main office, so the job location and access affect how we plan mobilization for work near US 287.

Places near Sunset

What boring work comes up near Sunset Brushy Creek?

  • Highway crossing: A US 287 bore uses a planned path beneath the roadway, with TxDOT review if the work enters its right of way.
  • Water service: A connection near Sunset Water System can be routed underground to avoid opening a path across Front Street.
  • Fiber route: A conduit bore along Bryan Road can carry fiber while leaving the road surface uncut.
  • Creek crossing: A Brushy Creek bore needs a depth plan beneath the channel and a check for federal jurisdiction.
  • Rail crossing: A BNSF Railway bore follows the railroad owner’s agreement for the crossing conditions.
  • Electric conduit: Near a Sunset route, we confirm the line owner before planning conduit around existing utilities.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Sunset work near BNSF Railway?

A map pin shows whether the Sunset route is near Front Street, Brushy Creek or BNSF Railway, details that can change the bore plan. Send the address or pin, what will go underground, the pipe or conduit size and footage. A sketch or plans help us see access and crossings before we scope the work.

A short, clear route along Front Street with few known crossings is simpler to plan than a route through Windthorst clay near Brushy Creek. The price depends on footage, pipe or conduit size, soil and rock, marked utilities to expose, pavement, creek crossings, pits and excavator time. A crossing at US 287 or BNSF Railway adds coordination, while Sunset’s 164 road miles from Yukon affects mobilization. For directional boring in Sunset, high profile or emergency work can also change the scope, so we confirm requirements before planning.

Questions people ask about boring in Sunset

Does Trinity Boring Solutions take directional boring work in Sunset, Montague County?

Yes, we take directional boring work in Sunset, Montague County. Our Yukon office coordinates the job from the first call through the bore log, whether our own crew or a vetted partner contractor is on site. For a route near US 287, the crew and plan depend on the scope and access.

What does a Sunset bore under BNSF Railway need?

A bore under BNSF Railway needs a crossing agreement from the railroad that owns the track. That agreement sets the crossing conditions for the work. BNSF Railway has 2.15 track miles inside Sunset, and the mapped community has 2 street and rail crossings.

Can a line be bored under Brushy Creek in Sunset?

Yes, a line can be planned beneath Brushy Creek, subject to the route and ground conditions. The creek has 3.85 channel miles inside Sunset, so the bore plan accounts for depth below the channel and checks whether the crossing falls under federal jurisdiction.

Who operates Sunset’s public water system, and where does its water come from?

Sunset Water System is privately owned and draws water from groundwater wells. The system serves 570 people through 190 service connections, figures we consider when planning underground work in Sunset. We confirm the specific water line location before planning a bore near Bryan Road or another route in Sunset.

Which electric utilities report service in Sunset and Montague County, and who confirms conduit specs?

Oncor Electric Delivery Company, Texas New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric Cooperative report electric service in Montague County. The line owner for a specific Sunset address must be confirmed before conduit planning, including on a route near US 287.

Who is responsible for Bryan Road in Sunset, and does a bore require cutting it?

Sunset has no city government, so the applicable county road authority handles a local street such as Bryan Road; TxDOT handles state highway right of way. A directional bore can pass below pavement without cutting the street, with entry and exit pits set in dirt.

Can I reach Trinity after hours about an urgent bore on Bryan Road in Sunset?

Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent Sunset job near Bryan Road, call to discuss the line, access and immediate scope. We also provide 24 hour emergency response.

How early should I call Texas811 before a Sunset bore near Front Street?

Request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For a Front Street bore, paint shows utility position, not depth. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects directional boring costs near US 287 in Sunset?

The route and scope set the price. Length, line size, soil, rock, utility exposures, pavement, creek crossings, pits, excavator time and mobilization all matter. Windthorst clay near Brushy Creek can affect the drilling plan, while a US 287 crossing and Sunset’s distance from Yukon can add planning or travel needs.

Where the Sunset facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Sunset

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Sunset, Texas

Type the address of your job in Sunset. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Sunset

Same county: Nocona · St. Jo · Nocona Hills · Ringgold. All counties: Texas county list.