trinityboringsolutions.com

Cushing Texas Directional Boring: Kirvin Fine Sandy Loam, FM 225 and Indian Creek

Quick Answer: FM 225 and Texas State Highway 204 are the main road obstacles, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Cushing, Texas. Along Cypress Avenue, our crews can install water, sewer, gas, electric conduit or fiber without cutting pavement. Cushing is 365 road miles from our Yukon, Oklahoma main office, and FM 225 is a planning point for mobilization. Kirvin fine sandy loam covers much of the mapped surface, but clay loam and clay at about 40 inches can cling to tooling and grip pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Cushing bores at a glance

  • Incorporated city in Nacogdoches County, Texas. Population 578 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 365 miles, about 7.4 hours of driving.
  • Ground: Kirvin soil is mapped on 42 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 21 percent of the area.
  • Highways inside the boundary: FM 225 and Texas State Highway 204. State permit office: TxDOT Lufkin District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Indian Creek.
  • Public water: City of Cushing, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near FM 225 in Cushing?

Trinity Boring Solutions takes directional boring work in Cushing, Nacogdoches County, where the Census Bureau Vintage 2024 estimate puts the population at 578. FM 225 and Texas State Highway 204 are the main road constraints for a bore route. We install water, sewer, gas, electric conduit and fiber beneath streets such as Cypress Avenue and Eucalyptus Avenue, with the route and line owner checked before drilling.

Our main office is in Yukon, Oklahoma, and Cushing work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa; a typical Cushing job is smaller, such as carrying a service beneath Cypress Avenue. When planning directional boring near FM 225, we draw on a family business founded in 1965, with directional boring experience since 1982.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Kirvin soil survey show about Cushing ground?

The USDA soil survey maps Kirvin soil across 42 percent of Cushing, with Kirvin fine sandy loam, 1 to 8 percent slopes, covering 35 percent of the mapped area. Fine sandy loam makes up 80 percent of the mapped surface texture, but the ground changes below that. At about 40 inches, clay loam is mapped under 36 percent of the area, sandy clay loam under 29 percent and clay under 24 percent. Average clay content at that depth is 35 percent, so a bore can meet sticky material that holds a hole yet grips the pipe.

USDA soil survey, inside the Cushing city limitsWhat is mapped
Soil series mappedKirvin 42 percent, Cuthbert 13 percent, Sacul 11 percent, Bowie 9 percent and Nacogdoches 6 percent
Texture at the surfacefine sandy loam 80 percent, loamy fine sand 10 percent and gravelly fine sandy loam 7 percent
Texture about 40 inches downclay loam 36 percent, sandy clay loam 29 percent and clay 24 percent
Engineering class about 40 inches downlean clay (CL) 54 percent, fat clay (CH) 28 percent and clayey sand (SC) 11 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inches21 percent of the area (0 percent hard rock, 21 percent weathered rock)
Seasonal water table within 60 inches29 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel35 percent of the area

The USDA soil survey maps bedrock within 60 inches across 21 percent of Cushing, all of it weathered, and within 40 inches across 14 percent; hard bedrock is not mapped within 60 inches. A seasonal water table is mapped within 60 inches across 29 percent, so pits may need pumping. Flood prone soils cover 1 percent. High steel corrosion risk is mapped across 35 percent, so the line owner should consider casing and tracer wire materials; HDPE avoids the steel concern. The Fine Silty Clay Decomposition Residuum is Cenozoic clay, while the Eocene Reklaw Formation includes sandstone and clay, which can make ground conditions change along a route.

How do we bore Cushing clay loam without losing the line?

Cushing has clay loam and clay below the Kirvin fine sandy loam, so we plan for sticky cuttings and pipe that can bind in the hole. Cypress Avenue routes also call for a careful locate and a bore path that protects pavement.

  1. We use thinner drilling fluid and polymer through Cushing clay loam, ream in stages, and pull the pipe the same day the hole is opened to limit swelling and grip.
  2. With 35 percent average clay at about 40 inches, we watch returns on FM 225 routes so pressure does not lift pavement or escape unnoticed.
  3. Where Kirvin fine sandy loam dominates the surface, we keep the hole supported with drilling fluid, stage the ream, and have the pipe ready before the final pass.
  4. For a route near Indian Creek, we track the drill head from the surface, log depth and pitch, and set the profile below the channel where required.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What does a bore have to cross on Cypress Avenue in Cushing?

Cushing bores may pass beneath FM 225 or Texas State Highway 204, both state highways inside the city limits, so the route and pavement limits matter from the start. Cypress Avenue is the longest named street at 1.18 miles within Cushing, followed by Eucalyptus Avenue at 1.09 miles and 8th Street at 0.97 miles. 6th Street extends 0.92 miles. A bore beneath one of these streets can keep the surface intact, with entry and exit pits placed off the paved route where access allows.

CrossingTypeMapped extentWho has a say
FM 225State highway1.6 roadway miles insideState highway office
Texas State Highway 204State highway1.2 roadway miles insideState highway office
Indian CreekStream0.41 channel miles insideChecked for Corps of Engineers jurisdiction
Dill CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Cushing or within one mile outside its limits, so a mapped rail crossing is not part of the city route picture. Indian Creek runs 0.41 channel miles inside Cushing, but no street crossing of a named stream is mapped. With Indian Creek inside Cushing, we distinguish streams from lakes and ponds during route planning; none are mapped within one mile. If a proposed bore does cross Indian Creek, we check during planning whether the crossing falls under U.S. Army Corps of Engineers jurisdiction and plan depth beneath the channel.

Whose permission does a Cushing bore in Nacogdoches County need?

A bore beneath FM 225 or Texas State Highway 204 needs a TxDOT utility permit, reviewed by the TxDOT Lufkin District, with cover depth shaping the profile. Electric and communication lines need 60 inches below the lowest crossed grade, and water lines need 60 inches at a highway crossing; pressurized sewer lines also need 60 inches. The utility owner files through TxDOT RULIS, while we prepare the bore plan and profile for that filing and work under the owner’s permit. Cushing is incorporated, so its city streets, including Cypress Avenue, belong to the city. No railroad crossing is mapped in the city; a proposed Indian Creek crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Cushing system?

The City of Cushing public water system draws from groundwater wells and reports 423 service connections serving 1,007 people. That is a useful route reference when planning a water service near FM 225 or Cypress Avenue, but the proposed line and existing utilities still need to be located. Electric service is reported in Nacogdoches County by Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative and Rusk County Electric Cooperative; we confirm the line owner for the specific address before a conduit bore.

Line ownerWhat it isSourceSize
City of CushingPublic water systemGroundwater wells423 connections, 1,007 people served
Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative and Rusk County Electric CooperativeElectric utilities reporting service in Nacogdoches CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates place Cushing’s median housing year at 1983, and we consider that context when planning underground routes. It estimates 26 percent of homes were built before 1960, 53 percent from 1960 to 1999 and 21 percent in 2000 or later. Along older streets such as 6th Street, a project may replace an existing service; Eucalyptus Avenue can also have a newer service request. We hydrovac pothole every marked utility on the bore path before drilling near it, since locate paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Cushing in relation to Mount Enterprise and our yard?

Cushing is an incorporated city in Nacogdoches County, at an elevation of 428 feet and covering 1.37 square miles. For Cushing locations such as Cypress Avenue, we use ZIP code 75760 to identify the city when coordinating project details. Reklaw is 9.0 miles northwest, and Mount Enterprise is 11.6 miles northeast; Nacogdoches, the county seat and nearest larger city, is 17.7 miles southeast. Cushing is 365 road miles and a 7.4 hour drive from our Yukon, Oklahoma yard. That distance is part of planning mobilization for work along FM 225 or Texas State Highway 204.

Places near Cushing

Which jobs call for a bore near Eucalyptus Avenue in Cushing?

  • Highway crossing: A bore beneath FM 225 or Texas State Highway 204 needs a profile set for the state highway crossing and its cover requirements.
  • Water service: A connection near the City of Cushing groundwater system can be routed beneath Cypress Avenue without opening the paved street.
  • Fiber conduit: A fiber route along Eucalyptus Avenue can pass beneath the street while marked utilities are exposed before drilling near them.
  • Creek crossing: A proposed Indian Creek bore needs a planned depth beneath the channel and a jurisdiction check during planning.
  • Older service replacement: Work along 6th Street may replace a service to one of the homes built before 1960 in Cushing.
  • Long service run: A route toward Mount Enterprise can be scoped for length, pipe size and access before mobilization from Yukon.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Cushing bore near 6th Street?

For a Cushing quote, send the address or map pin first, such as a point along 6th Street. Tell us what will go underground, whether it is water, sewer, gas, electric conduit or fiber, then give the pipe or conduit size and footage. A sketch or plans showing the route toward Cypress Avenue help us spot likely crossings and access needs before we price the work.

The biggest price factor in Cushing is the ground: Kirvin fine sandy loam gives way to clay loam and clay at about 40 inches, which can mean staged reaming and more control of fluid returns. Next are the pipe size and bore length, then marked utilities to expose and pavement such as FM 225 crossings. Creek work near Indian Creek, pits, excavator time and sand backfill also affect the scope. Mobilization matters because Cushing is 365 road miles from Yukon, and emergency or high profile work can require added planning.

Questions people ask about boring in Cushing

Does Trinity Boring Solutions take directional boring jobs in Cushing, Nacogdoches County?

Yes, Trinity takes directional boring work in Cushing, Nacogdoches County. We manage the job from the first call through the bore log, whether our own crews or a vetted partner contractor is on site. A route beneath FM 225 or Cypress Avenue can be planned around the line type, access and marked utilities.

Can groundwater or Indian Creek make Cushing bore pits difficult?

It can affect pit work. The USDA soil survey maps a seasonal water table within 60 inches across 29 percent of Cushing, so pits near Indian Creek may need pumping and careful sizing. Flood prone soils are mapped across 1 percent of the area. A proposed creek crossing also gets checked during planning for U.S. Army Corps of Engineers jurisdiction.

Does Kirvin soil in Cushing create a steel corrosion concern, and what pipe can we use?

The USDA soil survey maps high steel corrosion risk across 35 percent of Cushing, including areas mapped as Kirvin soil. The line owner decides whether steel casing or tracer wire needs coating. HDPE is another option for the line where its design fits. We use the route near FM 225 and the line specifications to plan the bore and material needs.

What ground will a bore pass through in Cushing Kirvin soil?

Kirvin is the largest mapped soil series in Cushing, covering 42 percent of the area. The USDA soil survey maps fine sandy loam at the surface, with clay loam under 36 percent and sandy clay loam under 29 percent at about 40 inches. Those are mapped patterns, not test borings, so a route near Cypress Avenue still needs field planning.

Is there rock near the surface for a Cushing bore?

The USDA soil survey maps bedrock within 60 inches across 21 percent of Cushing, and that mapped bedrock is weathered. Bedrock is mapped within 40 inches across 14 percent, while hard bedrock is not mapped within 60 inches. A route near Eucalyptus Avenue may still meet changing material, so depth and drilling response matter.

Who approves a Cushing bore under FM 225, and which TxDOT office reviews it?

TxDOT reviews the utility permit for work in the FM 225 right of way through its Lufkin District. The line owning utility submits the application in TxDOT RULIS, using the bore plan and profile we prepare. Required cover depends on the line type, and the permit may set a different depth for the Cushing crossing.

How far is Cushing from the Yukon yard, and does Nacogdoches change the job plan?

Cushing is 365 road miles and a 7.4 hour drive from our Yukon, Oklahoma yard. Nacogdoches is 17.7 miles southeast and is the county seat and nearest larger city. That regional distance affects mobilization planning for a Cushing job, including a bore near FM 225, along with equipment, length and access needs.

How much notice does Texas811 need for a Cushing bore along Cypress Avenue?

For a bore along Cypress Avenue, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For a Cushing crossing on Texas State Highway 204, we plan for Texas811’s stated minimum of at least two working days. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before continuing.

What affects the price of directional boring near FM 225 in Cushing?

The price depends on the specific Cushing route, not only its length. Kirvin soil and clay loam can affect drilling time; pipe size, footage, utility exposures and pavement at FM 225 crossings also matter. A possible Indian Creek crossing, pits, excavator time, backfill and mobilization from Yukon can change the work required. For Cushing scopes involving Kirvin soils, we price the defined job scope without applying a standard rate to each unit of distance.

Where the Cushing facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Cushing

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Cushing, Texas

Type the address of your job in Cushing. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Cushing

Same county: Garrison · Chireno. All counties: Texas county list.