Alto Texas Directional Boring: Nacogdoches Soil, US 69 and Larrison Creek
Quick Answer: US 69 is the main road a utility route may need to cross, and we do directional boring, also called horizontal directional drilling (HDD), in Alto, Texas. The Yukon main office is 356 road miles away, with San Antonio Street among the local routes to plan around. Nacogdoches fine sandy loam covers much of Alto, but clay is common about 40 inches down. Sticky clay can load a reamer and grip pipe, so we control fluid and stage the reaming.
Alto bores at a glance
- Incorporated city in Cherokee County, Texas. Population 1,064 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 356 miles, about 7.1 hours of driving.
- Ground: Nacogdoches soil is mapped on 56 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 3 percent of the area.
- Highways inside the boundary: US 69, Texas State Highway 21, FM 752, FM 851 and Texas State Highway 294. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Larrison Creek.
- Public water: City of Alto, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring on San Antonio Street in Alto?
US 69 and San Antonio Street can shape a utility route in Alto, and Trinity Boring Solutions takes directional boring work across Texas. Alto is in Cherokee County, where the Census Bureau Vintage 2024 estimate puts the population at 1,064. We install water, sewer, gas, electric conduit and fiber lines, including routes along San Antonio Street or beneath US 69 when the plans call for a crossing.
Our main office is in Yukon, Oklahoma, and Alto work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have been drilling directionally since 1982, giving us four decades to adapt our approach to ground like Alto clay loam and the Nacogdoches fine sandy loam mapped around town. The family business began in 1965.

What does the Nacogdoches soil survey show in Alto?
The USDA soil survey maps Nacogdoches soil across 56 percent of Alto and Alto soil across 31 percent. Nacogdoches fine sandy loam, sloping, eroded covers 44 percent of the mapped area; Alto clay loam with 0 to 1 percent slopes covers 31 percent. At about 40 inches below the surface, clay is mapped across 57 percent of the area and clay loam across 32 percent. Fine sandy loam at the surface does not mean the deeper bore path stays sandy. These are mapped soil patterns, not test borings, so a route still needs field checks.
| USDA soil survey, inside the Alto city limits | What is mapped |
|---|---|
| Soil series mapped | Nacogdoches 56 percent, Alto 31 percent, Hannahatchee 5 percent, Lilbert 3 percent and Trawick 3 percent |
| Texture at the surface | fine sandy loam 65 percent, clay loam 31 percent and loamy fine sand 4 percent |
| Texture about 40 inches down | clay 57 percent, clay loam 32 percent and loam 5 percent |
| Engineering class about 40 inches down | fat clay (CH) 56 percent, lean clay (CL) 38 percent and clayey sand (SC) 3 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | 3 percent of the area (0 percent hard rock, 3 percent weathered rock) |
| Seasonal water table within 60 inches | 36 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 94 percent of the area |
Bedrock is not mapped in the top five feet across most of Alto, though it is mapped within 60 inches in 3 percent of the area. The Weches Formation, an Eocene unit of sandstone and claystone, is the mapped geology; a bore may slow where weathered rock is met. A seasonal water table falls within 60 inches in 36 percent of the area, so pits may need pumping. Flood prone soils cover 5 percent, including creek areas to assess around Larrison Creek. High steel corrosion risk is mapped in 94 percent, so the line owner should consider protection for steel casing and tracer wire; HDPE avoids that soil corrosion concern.
How do we drill Alto’s clay ground?
Alto clay loam and the clay mapped below Nacogdoches soil call for a measured fluid plan. We expose marked lines, track the drill head, then ream and pull pipe in a sequence suited to the route.
- For Alto clay loam and the clay mapped below Nacogdoches soil, we use thinner drilling fluid with polymer and open the hole in stages to limit sticky buildup.
- Because heavy clay is mapped in Alto, we watch fluid returns closely near pavement, where pressure must stay controlled to avoid lifting the surface.
- Where the seasonal water table is mapped within 60 inches, including areas near Larrison Creek, we keep pits compact and have pumping ready.
- Before a bore on Marcus Street, we hydrovac each marked utility along the path, then track the head from the surface and log depth and pitch.

What does a bore have to cross in Alto near US 69?
US 69 runs 3.4 mapped roadway miles inside Alto, while Texas State Highway 21 runs 2.3 miles. FM 752, FM 851 and Texas State Highway 294 also pass through town. Each state road can bring a right of way and pavement into the bore plan, so the crossing limits and required cover need to be established before drilling. San Antonio Street is the longest named street at 2.26 miles, followed by Marcus Street at 1.6 miles and Lovers Lane at 0.81 miles. Their street access and buried services affect where entry and exit pits can fit.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 69 | US highway | 3.4 roadway miles inside | State highway office |
| Texas State Highway 21 | State highway | 2.3 roadway miles inside | State highway office |
| FM 752 | State highway | 0.8 roadway miles inside | State highway office |
| FM 851 | State highway | 0.7 roadway miles inside | State highway office |
| Texas State Highway 294 | State highway | 0.6 roadway miles inside | State highway office |
| Larrison Creek | Stream | 1.03 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Cedar Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Alto or within one mile outside its limits, so a mapped rail crossing is not part of the local route picture. Larrison Creek runs 1.03 channel miles through town, and one mapped street crossing intersects a named stream. A bore under or near that creek needs a depth plan that stays below the channel, with U.S. Army Corps of Engineers jurisdiction checked during planning. No lakes or ponds are mapped within one mile of town.
Who approves a bore in Alto and Cherokee County?
US 69, Texas State Highway 21, FM 752, FM 851 and Texas State Highway 294 are state routes, so work in their right of way needs a TxDOT utility permit. The TxDOT Tyler District reviews the application. The utility that owns the line files through TxDOT’s RULIS system; we supply the bore plan and profile and work under the utility owner’s permit. Alto is incorporated, so its city streets belong to the city itself, while the state routes remain under TxDOT. No railroad crossing is mapped in town. For Larrison Creek, the U.S. Army Corps of Engineers jurisdiction is checked during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried near the City of Alto water system?
The City of Alto public water system draws from groundwater wells and serves 1,225 people through 587 service connections. That network is a key existing utility to locate before a new water route is planned. Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric Cooperative report electric service in Cherokee County; the line owner is confirmed for a conduit bore instead of assuming one provider serves every US 69 address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Alto | Public water system | Groundwater wells | 587 connections, 1,225 people served |
| Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric Cooperative | Electric utilities reporting service in Cherokee County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Alto’s median housing year at 1976. The survey shows 39 percent of homes were built before 1960 and 9 percent in 2000 or later, a mix that can mean replacement work as well as new service routes near Marcus Street. Before drilling, we hydrovac pothole each marked utility on the bore path; paint gives its position, not its depth. A proposed line under San Antonio Street is one example where that check matters.

Where is Alto in relation to Rusk and Trinity’s Yukon yard?
Alto is an incorporated town in Cherokee County, at an elevation of 434 feet and covering 1.7 square miles. Its ZIP code is 75925. Rusk, the county seat and nearest larger city, is 11.1 miles northwest; Wells is 13.2 miles southeast, and Reklaw is 15.8 miles north. Cushing lies 17.5 miles northeast, and Gallatin is 17.6 miles north. The Yukon, Oklahoma main office is 356 road miles away, a 7.1 hour drive. That distance is part of mobilization planning for work along US 69 or San Antonio Street.
Places near Alto
- Directional boring in Rusk: 11.1 miles northwest
- Directional boring in Wells: 13.2 miles southeast
- Directional boring in Reklaw: 15.8 miles north
- Directional boring in Cushing: 17.5 miles northeast
- Directional boring in Gallatin: 17.6 miles north
What boring work comes up near Marcus Street in Alto?
- Highway crossing: A route beneath US 69 is bored rather than cut through existing highway pavement, with the bore extended under all rural travel lanes.
- Water service: A new connection near the City of Alto groundwater system needs a route checked against existing water lines before the drill advances.
- Fiber route: A conduit run along San Antonio Street can use entry and exit pits in dirt to avoid cutting pavement and driveways.
- Creek crossing: A planned line beneath Larrison Creek needs a depth that stays under the channel and a jurisdiction check during planning.
- Street service: A bore on Marcus Street can carry water, sewer or electric conduit while hydrovac potholing verifies marked utilities before drilling nearby.
- State road route: Work near Texas State Highway 21 needs the utility owner’s TxDOT permit for right of way work before the crossing proceeds.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Larrison Creek in Alto?
Start with the address or map pin, such as a point on San Antonio Street or near Larrison Creek. Tell us what goes underground, whether it is water, fiber or another line, then give the pipe or conduit size and footage. A sketch or plans showing a US 69 crossing help us locate the route, access and pits.
The job scope sets the price, with Alto’s clay rich ground first because it can take staged reaming and careful fluid control. Length and pipe size shape the equipment and sequence. A US 69 crossing adds right of way and pavement considerations, while marked utilities to expose, creek work at Larrison Creek, pits, excavator time and sand backfill also affect the scope. Mobilization matters because the Yukon yard is 356 road miles away. High profile or emergency work can add planning demands.
Questions people ask about boring in Alto
Does Trinity take directional boring jobs in Alto and Cherokee County?
Yes. Trinity Boring Solutions takes directional boring work in Alto and across Texas. The job is handled by our own crews or through a satellite yard run by a partner drilling contractor we have vetted. You work with Trinity through the bore log, whether the route is near US 69 or San Antonio Street.
Does Nacogdoches soil in Alto create a corrosion concern, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across 94 percent of Alto, including areas with Nacogdoches soil. The line owner should account for that risk when selecting coatings for steel casing or tracer wire. HDPE avoids this soil corrosion concern, and the suitable pipe depends on the line and project plans.
What ground does a directional bore pass through in Alto’s Nacogdoches soil?
The USDA soil survey maps Nacogdoches soil across 56 percent of Alto, with fine sandy loam at the surface in much of that area. About 40 inches down, clay is mapped across 57 percent of town and clay loam across 32 percent. That deeper clay can stick to tooling, so we plan staged reaming and fluid control.
Will a bore in Alto hit rock below the streets?
Bedrock is not mapped in the top five feet across most of Alto, but the survey maps it within 60 inches in 3 percent of the area. The Weches Formation beneath the town includes sandstone and claystone. If a route near Marcus Street meets weathered sandstone, drilling may slow and the transition can affect steering.
Who approves a utility bore under US 69 in Alto?
TxDOT reviews work in the US 69 right of way through its Tyler District. The utility that owns the line submits the application in TxDOT’s RULIS system. We provide the bore plan and profile and work under the permit issued to that utility owner; the same process applies to other state routes in Alto.
Can a line be bored under Larrison Creek in Alto?
A line can be planned beneath Larrison Creek, which runs 1.03 channel miles through Alto. The route needs enough depth to stay below the channel, and U.S. Army Corps of Engineers jurisdiction is checked during planning. A mapped street crossing of a named stream also makes the creek route important to review.
How much Texas811 notice does a bore on San Antonio Street in Alto need?
For a planned start on San Antonio Street, request a Texas811 locate at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Texas811 describes that as two working days. The ticket has a 20 day life; if the start slips more than 14 days past the original notice, make a new request.
How far is Alto from the Yukon office, and does Rusk change the job?
Alto is 356 road miles and a 7.1 hour drive from Trinity’s Yukon, Oklahoma main office. Rusk is 11.1 miles northwest of Alto and is the county seat. The Yukon distance can affect mobilization, while the route, ground and crossing details near Rusk or US 69 determine the field plan.
What affects the cost of directional boring under US 69 in Alto?
The cost depends on the project scope, not a standard figure. For a US 69 route, length, pipe size, clay conditions, pavement and the number of marked utilities to expose all matter. Larrison Creek crossings, pits, excavator time, sand backfill and mobilization from the Yukon yard can also change what the work requires.
Where the Alto facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Alto
- U.S. Census Bureau, TIGER/Line 2024: Alto boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Alto
- U.S. Census Bureau, American Community Survey 2019 to 2023: Alto housing units and year built
- Macrostrat geologic map compilation: map units under Alto
- U.S. EPA Safe Drinking Water Information System: public water systems serving Alto
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Cherokee County
- U.S. Geological Survey, Elevation Point Query Service: Alto elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Alto
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Alto
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Alto, Texas
Type the address of your job in Alto. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Alto
Same county: Jacksonville · Shadybrook · New Summerfield · Bullard · Cuney. All counties: Texas county list.
