Reklaw Texas Directional Boring: Bowie Fine Sandy Loam, US 84 and Mud Creek
Quick Answer: USDA maps fine sandy loam at Reklaw’s surface and sandy clay loam or clay about 40 inches down. On US 84, we use directional boring, also called horizontal directional drilling (HDD), to pass lines below pavement. Reklaw is 356 road miles from Yukon, so Main Street work needs mobilization planned around that trip. At 40 inches, sandy clay loam covers 46 percent of mapped area; sticky clay can grip the pipe.
Reklaw bores at a glance
- Incorporated city in Rusk County and Cherokee County, Texas. Population 345 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 356 miles, about 7.2 hours of driving.
- Ground: Bowie soil is mapped on 26 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 28 percent of the area.
- Highways inside the boundary: US 84, Texas State Highway 204, FM 839 and FM 235. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Mud Creek and White Oak Creek.
- Public water: City of Reklaw, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Mud Creek in Reklaw?
Trinity Boring Solutions takes Reklaw work along Main Street and other city routes in Rusk County and Cherokee County. The USDA soil survey maps fine sandy loam at the surface and sandy clay loam or clay about 40 inches down, a depth that matters for the bore plan. The Census Bureau Vintage 2024 estimate puts Reklaw’s population at 345. We install water, sewer, gas, electric conduit and fiber lines beneath routes such as US 84.
Our main office is in Yukon, Oklahoma, and Reklaw work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Reklaw plans near Mud Creek, our family business dates to 1965 and our directional boring experience dates to 1982. With City of Reklaw groundwater lines and electric providers reported in Rusk County already in the area, our record has no utility strike in over 25 years.

How does Reklaw’s Bowie soil affect a bore?
The USDA soil survey maps Bowie fine sandy loam across parts of Reklaw, while fine sandy loam is the leading surface texture at 65 percent. About 40 inches below the surface, sandy clay loam is mapped under 46 percent of the area, clay under 30 percent and clay loam under 16 percent. Average clay content at that depth is 32 percent, and heavy clay is mapped in 40 percent of the area. These are mapped patterns, not test borings; sticky clay can build on a reamer and hold against the pipe.
| USDA soil survey, inside the Reklaw city limits | What is mapped |
|---|---|
| Soil series mapped | Bowie 26 percent, Cuthbert 14 percent, Mattex 11 percent, Redsprings 8 percent and Elrose 7 percent |
| Texture at the surface | fine sandy loam 65 percent, clay loam 11 percent and gravelly fine sandy loam 9 percent |
| Texture about 40 inches down | sandy clay loam 46 percent, clay 30 percent and clay loam 16 percent |
| Engineering class about 40 inches down | lean clay (CL) 53 percent, fat clay (CH) 18 percent and clayey sand (SC) 10 percent |
| Average clay content about 40 inches down | 32 percent |
| Bedrock mapped within 60 inches | 28 percent of the area (0 percent hard rock, 28 percent weathered rock) |
| Seasonal water table within 60 inches | 56 percent of the area |
| Flood prone soils | 19 percent of the area |
| High corrosion risk for uncoated steel | 68 percent of the area |
Weathered bedrock is mapped within 60 inches across 28 percent of Reklaw, and bedrock is within 40 inches across 16 percent; hard bedrock is not mapped within 60 inches. Seasonal water tables are mapped within 60 inches in 56 percent of the area, and flood prone soils in 19 percent, so pits near Mud Creek need water and depth planning. High steel corrosion risk is mapped in 68 percent, a concern for uncoated casing or tracer wire that the line owner should consider. The map also names the Cenozoic Fine Silty Clay Decomposition Residuum and the Eocene Reklaw Formation, which includes clay and sandstone.
What does it take to bore Reklaw’s sandy clay loam?
Reklaw’s mapped sandy clay loam and clay call for controlled fluid and staged reaming, especially where seasonal water may reach pits. We plan the bore around the soil pattern and nearby features such as Mud Creek.
- In Reklaw’s mapped clay, we keep drilling fluid controlled and ream in stages so sticky cuttings do not load the tool or grip the pipe.
- Where Bowie fine sandy loam is mapped, we keep the pipe ready as the final ream is completed so the open hole is not left waiting.
- Seasonal water is mapped within 60 inches across 56 percent of Reklaw, so we plan compact pits and pumping where site conditions call for it.
- Before drilling near marked City of Reklaw water lines or electric facilities reported in Rusk County, we hydrovac expose each marked utility on the route.

What is in the way of a new line in Reklaw near US 84?
US 84, Texas State Highway 204, FM 839 and FM 235 run within Reklaw, so a route may involve state highway right of way as well as city streets. Main Street is the longest named street in the city, followed by Sugar Hill Road and Old Sacul Road. Nacogdoches Street is another named route. A bore under existing highway pavement avoids cutting across the roadway, while the route and required cover need to match the highway permit.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 84 | US highway | 1.7 roadway miles inside | State highway office |
| Texas State Highway 204 | State highway | 3.2 roadway miles inside | State highway office |
| FM 839 | State highway | 2 roadway miles inside | State highway office |
| FM 235 | State highway | 0.2 roadway miles inside | State highway office |
| Mud Creek | Stream | 0.67 channel miles inside | Checked for Corps of Engineers jurisdiction |
| White Oak Creek | Stream | 0.62 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Rutherford Slough | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Cooke Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Striker Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Reklaw or within 1 mile outside its limits, so the mapped street and rail crossing count is none. Mud Creek runs 0.67 channel miles in the city and White Oak Creek runs 0.62 channel miles; public mapping shows two street crossings of named streams. Those creek routes can affect bore depth and pit placement. No lakes or ponds are mapped within 1 mile, and creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Who approves a bore near Reklaw in Rusk County?
For work along US 84, Texas State Highway 204, FM 839 or FM 235, TxDOT is the highway authority, and the TxDOT Tyler District reviews the utility permit. The utility that owns the line submits the application through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the owner’s permit. Texas highway rules require boring or tunneling beneath existing highway pavement, and the permit sets the required cover. Because Reklaw is incorporated, we treat Main Street as a city street when coordinating boring access and permits. A Mud Creek crossing is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are near the City of Reklaw water system?
The City of Reklaw public water system draws from groundwater wells and reports 220 service connections serving 660 people. A bore near its water lines needs the marked facilities exposed before drilling close by. The county records list Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative as reporting electric service in the county. We confirm the electric line owner for the US 84 route before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Reklaw | Public water system | Groundwater wells | 220 connections, 660 people served |
| Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative | Electric utilities reporting service in Rusk County and Cherokee County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Reklaw’s median housing year at 1976; 12 percent of homes were built before 1960, 81 percent from 1960 to 1999 and 7 percent in 2000 or later. That mix can mean a project is replacing an older service or adding a new one along Main Street. Before a drill approaches a marked water or electric line, we use hydrovac potholing to expose it because locate marks show position, not depth.

Where is Reklaw in relation to Gallatin and other towns?
Reklaw covers 2.94 square miles across Rusk County and Cherokee County, at an elevation of 286 feet, and ZIP code 75784. Gallatin is 10.2 miles west, while Cushing is 9.0 miles southeast; Rusk is 10.9 miles southwest and the nearest larger city. Henderson, the Rusk County seat, is 22.8 miles northeast. From our Yukon, Oklahoma yard, Reklaw is 356 road miles away and a 7.2 hour drive, which is part of planning a Main Street mobilization.
Places near Reklaw
- Directional boring in Cushing: 9 miles southeast
- Directional boring in Gallatin: 10.2 miles west
- Directional boring in Rusk: 10.9 miles southwest
- Directional boring in New Summerfield: 11.1 miles northwest
- Directional boring in Alto: 15.8 miles south
Which jobs call for a bore near Old Sacul Road in Reklaw?
- Highway crossing: A bore beneath US 84 can carry a water line or conduit without opening the pavement across the travel lanes.
- Water service: A service near the City of Reklaw groundwater system can be routed beneath Main Street after marked lines are exposed.
- Fiber drop: A fiber conduit along Old Sacul Road can pass below driveways and pavement rather than cutting each surface.
- Creek crossing: A line near Mud Creek needs a planned depth beneath the channel and a review for Corps jurisdiction.
- Electric conduit: A route near FM 839 starts with confirming the line owner because several electric providers report service in Rusk County.
- New service: A route along Sugar Hill Road can connect a property while keeping the bore path clear of marked utilities.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for directional boring in Reklaw near Main Street?
For a Main Street quote, start with the address or map pin, then tell us what line will go in, its pipe or conduit size and the footage. A sketch or plans help show whether the route crosses US 84, Mud Creek or another marked utility. Those details let us assess the path and choose the right equipment for Reklaw’s mapped ground.
The largest price factor is often the ground: Reklaw’s mapped clay can cling to a reamer, while weathered bedrock may slow drilling. A route under US 84 adds highway permit planning and cover requirements; Mud Creek brings crossing depth and pit access into the scope. Pipe size, bore length, utility exposures, pavement, pits, sand backfill and excavator time also matter. Mobilization reflects Reklaw’s 356 road miles from Yukon, and emergency or high profile work can change the plan.
Questions people ask about boring in Reklaw
Does Trinity take directional boring jobs in Reklaw and Rusk County, and who staffs them?
Yes. We take directional boring work in Reklaw and across Texas, with our own crews or crews from partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, even when a partner crew is on site. For a route near Main Street, we plan the work around the address and bore details.
Can wet ground or flooding near Mud Creek affect bore pits in Reklaw?
Yes, water can affect pits in Reklaw: seasonal water tables are mapped within 60 inches across 56 percent of the area, and flood prone soils across 19 percent. Near Mud Creek, we plan pit placement and depth with those conditions in mind. Depending on the site, smaller pits and pumping may be needed.
Does Bowie soil in Reklaw create a corrosion issue for steel, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across 68 percent of Reklaw, so the line owner should consider casing and tracer wire materials. Across Reklaw’s Bowie soil series, we account for soil conditions while noting HDPE is not subject to that corrosion concern. The right material depends on the line and project design, including a route near Bowie fine sandy loam.
What ground does a bore pass through in Reklaw’s Bowie soil?
The USDA soil survey maps Bowie fine sandy loam at the surface in Reklaw, with sandy clay loam under 46 percent of the area about 40 inches down. Clay is mapped under 30 percent at that depth. Those are mapped soil patterns, not test borings; sticky clay can build on a reamer and make pipe pullback harder.
Is there rock near the surface in Reklaw, and how much is mapped within five feet?
Weathered bedrock is mapped within 60 inches in 28 percent of Reklaw, while bedrock is mapped within 40 inches in 16 percent. Hard bedrock is not mapped within 60 inches. The Eocene Reklaw Formation includes sandstone and clay, so a project still needs to account for conditions encountered along its specific route.
Who approves a bore beneath US 84 in Reklaw, and which TxDOT office reviews it?
TxDOT permits work in the US 84 right of way, and the TxDOT Tyler District reviews the application. The utility owner files through RULIS, while we prepare the bore plan and profile for its application. For an existing highway crossing in Reklaw, TxDOT rules require boring or tunneling beneath the pavement.
Does Trinity cover Cushing and rural sites outside Reklaw?
Yes. We take work in Reklaw, Cushing and rural sites outside the city limits. Cushing is 9.0 miles southeast of Reklaw, and a nearby job still needs its own route details, utility locates and site plan. Our coverage extends across Texas, not only the streets within Reklaw.
How much Texas811 notice do I need for a Reklaw bore on Main Street, and what if marks move?
For a Main Street bore, the locate request goes to Texas811 at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For a Reklaw permit through TxDOT Tyler District, if our start slips more than 14 days past the original notice, we make a new request. For boring near White Oak Creek in Reklaw, we refresh marks through Texas811 if they wear off or move before work continues.
What affects the cost of a directional bore under US 84 in Reklaw, Rusk County?
The cost depends on the US 84 route and the full job scope, not just length. Reklaw’s clay and possible weathered bedrock affect drilling time; highway permitting, pavement, creek crossings and the number of marked utilities to expose also matter. Pipe size, pits, excavator time, backfill and mobilization from Yukon add to the work plan.
Where the Reklaw facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Reklaw
- U.S. Census Bureau, TIGER/Line 2024: Reklaw boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Reklaw
- U.S. Census Bureau, American Community Survey 2019 to 2023: Reklaw housing units and year built
- Macrostrat geologic map compilation: map units under Reklaw
- U.S. EPA Safe Drinking Water Information System: public water systems serving Reklaw
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Rusk County and Cherokee County
- U.S. Geological Survey, Elevation Point Query Service: Reklaw elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Reklaw
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Reklaw
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Reklaw, Texas
Type the address of your job in Reklaw. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Reklaw
County: Cherokee County directional boring. Same county: Jacksonville · Shadybrook · Wells · Bullard · Cuney · Henderson · Kilgore · Lake Cherokee · Overton · Tatum · New London · Mount Enterprise. All counties: Texas county list.
