trinityboringsolutions.com

Aransas Pass Texas Directional Boring: Fine Sand, Texas State Highway 361, Union Pacific

Quick Answer: Texas State Highway 361 and Union Pacific track are major crossings to plan around; Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Aransas Pass, Texas. From the Yukon, Oklahoma main office, Aransas Pass is 586 road miles away, and Cemetery Road still needs its own utility marks exposed. The USDA soil survey maps fine sand across 29% of the surface, where loose ground can cave behind the drill and calls for fluid support and staged reaming. Avenue A pits need planning for the mapped shallow seasonal water table.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Aransas Pass bores at a glance

  • Incorporated city in Nueces County, San Patricio County and Aransas County, Texas. Population 8,742 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 586 miles, about 11.3 hours of driving.
  • Ground: Tidal flats (miscellaneous area) soil is mapped on 11 percent of the area, with fine sand about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 361, Texas State Highway 35, Texas State Highway 35 Business, Loop 90 and Texas State Highway 81. State permit office: TxDOT Corpus Christi District.
  • Railroad track inside the boundary: Union Pacific, with 8 mapped street and rail crossings.
  • Public water: City of Aransas Pass, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Aransas Pass and Nueces County?

Trinity Boring Solutions takes directional boring work in Aransas Pass, where Texas State Highway 361 is a major route to plan around. The Census Bureau Vintage 2024 estimate puts the population at 8,742 across Aransas, Nueces and San Patricio counties. Along streets such as Avenue A, our crews can install water, sewer, gas, electric conduit and fiber lines by bore rather than opening the full route.

Our main office is in Yukon, Oklahoma, and Aransas Pass work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record we bring to planning around the City of Aransas Pass water system and electric lines reported in Nueces County. Our family business began in 1965, and we have done directional boring since 1982; we plan crossings of Texas State Highway 361 in Aransas Pass.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show in Aransas Pass around Tidal flats (miscellaneous area)?

The USDA soil survey maps Tidal flats (miscellaneous area) across 11% of Aransas Pass, alongside 11% Galveston soil. Fine sand covers 29% of the surface; about 40 inches down, the survey maps fine sand across 14% and loamy fine sand across 12%. Average clay content at that depth is 10%. These are mapped soil patterns, not test borings, so they help frame the plan but do not replace checking the actual route. Loose fine sand can fall in behind the bit, so fluid support and staged reaming matter.

USDA soil survey, inside the Aransas Pass city limitsWhat is mapped
Soil series mappedTidal flats (miscellaneous area) 11 percent, Galveston 11 percent, Mustang 3 percent and Barrada 3 percent
Texture at the surfacefine sand 29 percent and clay 4 percent
Texture about 40 inches downfine sand 14 percent, loamy fine sand 12 percent and silty clay 3 percent
Engineering class about 40 inches downsilty sand (SM) 29 percent, lean clay (CL) 4 percent and clayey sand (SC) 3 percent
Average clay content about 40 inches down10 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches38 percent of the area
Flood prone soils19 percent of the area
High corrosion risk for uncoated steel9 percent of the area

For Aransas Pass, the USDA layers show no bedrock mapped within the top five feet, while the geologic map identifies the unit as Water and gives no age. Seasonal water tables are mapped within 60 inches across 38% of the area, and flood prone soils cover 19%, so pits may need pumping and wet sand needs close control. High steel corrosion risk covers 9%; the line owner should consider casing and tracer wire materials, while HDPE avoids that steel concern.

What does it take to bore fine sand in Aransas Pass?

Fine sand is mapped across 29% of Aransas Pass, so we plan for the hole to loosen behind the drill. The route and the shallow water table shape pit placement and drilling fluid.

  1. Fine sand mapped around Aransas Pass can cave behind the drill, so we build support with drilling fluid, ream in stages and have the pipe ready for the final pass.
  2. With seasonal water tables mapped within 60 inches across 38% of the area, we keep pits small and pump them when water gathers near Avenue A.
  3. Before drilling near a marked line, we hydrovac pothole it because the locate paint along Wheeler Avenue shows position but not depth.
  4. We track the drill head from the surface and log depth and pitch, keeping the route controlled beneath Texas State Highway 361 pavement.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What is in the way of a new line in Aransas Pass near Texas State Highway 361?

Texas State Highway 361, with 11.2 mapped roadway miles inside Aransas Pass, is a key route to account for when a bore crosses pavement. Texas State Highway 35 and Texas State Highway 35 Business also run through the city. Cemetery Road is the longest named street at 5.2 miles, followed by Avenue A at 4.14 miles and Commercial Street at 3.6 miles. Those street lengths create routes where existing utilities and access points need to be checked before setting bore pits.

CrossingTypeMapped extentWho has a say
Texas State Highway 361State highway11.2 roadway miles insideState highway office
Texas State Highway 35State highway5.3 roadway miles insideState highway office
Texas State Highway 35 BusinessState highway4.1 roadway miles insideState highway office
Loop 90State highway1.9 roadway miles insideState highway office
Texas State Highway 81State highway1.3 roadway miles insideState highway office
FM 1069State highway0.5 roadway miles insideState highway office
Texas State Highway 188Highway nearby0.5 miles outsideState highway office
Union PacificRailroad3.7 track miles insideThe railroad
Swipe the table sideways to see every column.

Union Pacific has 3.7 track miles inside Aransas Pass, and public mapping shows 8 street and rail crossings in the city. A track bore needs the railroad owner’s agreement, with its conditions shaping the crossing plan. No named streams are mapped inside or within one mile of the limits, though the city has 0.11 miles of unnamed drainage. No lakes or ponds are mapped within one mile, so drainage rather than a named water crossing is the local feature to check.

Whose approval does an Aransas Pass bore near Union Pacific need?

For a bore in Texas State Highway 361 right of way, the utility owner applies through TxDOT’s RULIS system, and the TxDOT Corpus Christi District reviews it. For utility work in Aransas Pass, we prepare the bore plan and profile and work under the permit issued to the utility owner. TxDOT requires boring or tunneling beneath existing highway pavement, and the permit sets the required cover. Aransas Pass city streets belong to the city itself. A crossing of the Union Pacific track needs an agreement from the railroad that owns it; mapped local drainage is checked during route planning for any water crossing concerns.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground in Aransas Pass and Nueces County?

The City of Aransas Pass public water system uses purchased surface water and has 4,734 service connections serving 8,088 people. That gives a water route near Avenue A a known local system to check against before boring. Electric service reported in Nueces County includes AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative. We confirm the line owner for the specific address before planning an electric conduit bore, since the county list does not identify service at every Aransas Pass property.

Line ownerWhat it isSourceSize
City of Aransas PassPublic water systemSurface water bought from another system4,734 connections, 8,088 people served
AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric CooperativeElectric utilities reporting service in Nueces County, San Patricio County and Aransas CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Aransas Pass’s median housing year at 1990; 20% of homes were built before 1960, 38% from 1960 to 1999 and 42% in 2000 or later. A replacement bore along Wheeler Avenue may follow older buried services, while newer work can add a service connection. Before the drill approaches any marked utility on that route, we expose it with hydrovac potholing because paint does not show depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Do you cover Aransas Pass and nearby Port Aransas?

Aransas Pass is an incorporated city in Aransas, Nueces and San Patricio counties, with 13.19 square miles of land and ZIP codes 78336 and 78373. Falman is 4.3 miles west; Port Aransas is 6.6 miles south; Ingleside is 7.1 miles southwest. Corpus Christi, the county seat and nearest larger city, is 11.9 miles south. Rockport is 9.7 miles north. Our Yukon yard is 586 road miles away, an 11.3 hour drive, so distance is part of planning a route near Texas State Highway 361.

Places near Aransas Pass

What kinds of bores come up in Aransas Pass near Cemetery Road?

  • Highway crossing: A bore beneath Texas State Highway 361 avoids cutting pavement, with the utility owner’s permit and required cover shaping the plan.
  • Water service: A new connection near Avenue A can be routed toward the City of Aransas Pass public water system after the line path is checked.
  • Fiber route: A conduit bore along Cemetery Road can pass beneath pavement while marked utilities are exposed before drilling near them.
  • Rail crossing: A route beneath Union Pacific track needs the railroad owner’s agreement, with crossing conditions included in the bore plan.
  • Drainage crossing: The 0.11 miles of unnamed drainage in Aransas Pass may affect pit placement and route depth, even though no named streams are mapped.
  • Electric conduit: Before planning a conduit bore near Commercial Street, we confirm which reported county electric provider owns the line at that address.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore in Aransas Pass near Wheeler Avenue?

For a Wheeler Avenue quote, start with the address or map pin, then tell us what goes underground. Give us the pipe or conduit size and the footage; a sketch or plans help show the route and nearby crossings. Those details let us see whether the work is a short service connection or a longer bore across a street.

The route and scope set the price for an Aransas Pass bore. Fine sand can call for staged reaming and fluid support, while shallow seasonal water can add pit pumping. A crossing of Texas State Highway 361 or Union Pacific track brings added planning and coordination. Length, pipe size, utilities to expose, pavement, drainage, pit work and excavator time all affect the job. We account for the 586 road miles from Yukon when planning mobilization for directional boring work in Aransas Pass.

Questions people ask about boring in Aransas Pass

Does Trinity take Aransas Pass directional boring jobs in Nueces County, and who staffs them?

Yes. Trinity Boring Solutions takes Aransas Pass work, including jobs in Nueces County, with our crews and vetted partner contractors supporting field operations. Customers work with Trinity from the first call through the bore log, regardless of which crew is at the site. Texas State Highway 361 is one local route we consider when laying out a bore.

What do Aransas Pass homes and buried lines near Avenue A mean for replacement bores?

The American Community Survey 2019 to 2023 estimates put the median housing year in Aransas Pass at 1990, with 20% of homes built before 1960. A replacement route near Avenue A may encounter older services, so marked utilities need to be exposed before the drill approaches. Newer homes can also mean a service connection needs a separate route plan.

Can groundwater or flood prone ground near Tidal flats (miscellaneous area) soil affect Aransas Pass bore pits?

Yes. Aransas Pass has seasonal water tables mapped within 60 inches across 38% of the area, and flood prone soils across 19%. Near Tidal flats (miscellaneous area) soil, those mapped conditions mean we plan pit placement carefully and may need to pump water. The survey guides planning, but it is not a test of the specific bore route.

What ground might an Aransas Pass bore meet near Tidal flats (miscellaneous area) soil?

The USDA soil survey maps Tidal flats (miscellaneous area) across 11% of Aransas Pass. About 40 inches down, it maps fine sand across 14% and loamy fine sand across 12%, with average clay content of 10%. Fine sand can loosen behind the drill, so fluid support and staged reaming help keep the bore open.

Will an Aransas Pass bore hit rock?

The USDA mapping shows no bedrock within the top five feet of Aransas Pass, but that does not rule out deeper rock. The geologic map labels the unit Water and supplies no age. For a route near Cemetery Road, the soil survey is a planning reference, not a substitute for checking actual conditions along the bore.

Who approves a directional boring permit under Texas State Highway 361 in Aransas Pass?

TxDOT reviews a utility owner’s right of way application for Texas State Highway 361 through the TxDOT Corpus Christi District. The utility owner files in RULIS, while we prepare the bore plan and profile and work under the owner’s permit. Existing highway pavement is crossed by boring or tunneling, with cover set by the permit.

Does Trinity cover Falman and rural sites outside Aransas Pass?

Yes. We take work in Aransas Pass and across Texas, including nearby Falman, which is 4.3 miles west of the city. The route still needs a site specific review for distance, access and marked utilities. Port Aransas is 6.6 miles south, another nearby place where a project location helps define the scope.

How early should I call Texas811 for an Aransas Pass bore near Cemetery Road, and what if marks move?

For a bore near Cemetery Road, Texas law requires the locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Texas811 describes this as at least two working days. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks need refreshing through Texas811 before work continues.

What affects the cost of an Aransas Pass bore near Texas State Highway 361?

In Aransas Pass, we set the price from the details of each directional boring job. A short route through accessible ground may be simpler to plan than a longer bore beneath Texas State Highway 361 or Union Pacific track. Length, pipe size, soil, pavement, utility exposures, drainage, pits and excavator time all affect the scope. Mobilization from the Yukon office also matters because Aransas Pass is 586 road miles away.

Where the Aransas Pass facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Aransas Pass

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Aransas Pass, Texas

Type the address of your job in Aransas Pass. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page