trinityboringsolutions.com

Ingleside on the Bay Texas Directional Boring: Nueces Fine Sand, FM 1069 and Barrier Island Deposits

Quick Answer: The City of Ingleside on the Bay owns the water system, while AEP Texas Central and San Patricio Electric Cooperative report electric service in the county, so a Bayshore Drive bore starts with confirming line ownership. We do directional boring, also called horizontal directional drilling (HDD), for routes beneath streets such as Sunset Drive. Ingleside on the Bay is 593 road miles from our Yukon yard, a distance that affects mobilization for work near FM 1069. Nueces fine sand is common here, so we plan the reaming and drilling fluid to help keep the bore open.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Ingleside on the Bay bores at a glance

  • Incorporated city in San Patricio County, Texas. Population 602 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 593 miles, about 11.5 hours of driving.
  • Ground: Nueces soil is mapped on 42 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 1069. State permit office: TxDOT Corpus Christi District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Ingleside on the Bay, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring along Bayshore Drive in Ingleside on the Bay?

We take directional boring work in Ingleside on the Bay, San Patricio County, where the Census Bureau Vintage 2024 estimate puts the population at 602 residents. The City of Ingleside on the Bay owns the water system, while AEP Texas Central and San Patricio Electric Cooperative report electric service in the county, so we confirm the line owner before planning a bore. Our crews can place water, sewer, gas, electric conduit and fiber beneath routes such as Bayshore Drive.

Our main office is in Yukon, Oklahoma, and Ingleside on the Bay work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our record has no utility strike in over 25 years, a standard we bring to locates near the City of Ingleside on the Bay water system and streets such as Bayshore Drive. Our family business began in 1965, and directional boring has been part of our work since 1982.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What is the Nueces soil like to bore in Ingleside on the Bay?

The USDA soil survey maps Nueces soils across 42 percent of Ingleside on the Bay, with fine sand as the leading mapped surface texture. At about 40 inches below the surface, sandy clay loam is mapped under 42 percent of the area, fine sand under 30 percent and loamy fine sand under 23 percent. Surface textures are fine sand under 72 percent and loamy fine sand under 23 percent. These are mapped soil patterns, not test borings, so we use them to plan and verify the actual ground as the bore advances.

USDA soil survey, inside the Ingleside on the Bay city limitsWhat is mapped
Soil series mappedNueces 42 percent, Dianola 23 percent, Lydiann 19 percent and Galveston 11 percent
Texture at the surfacefine sand 72 percent and loamy fine sand 23 percent
Texture about 40 inches downsandy clay loam 42 percent, fine sand 30 percent and loamy fine sand 23 percent
Engineering class about 40 inches downclayey sand (SC) 42 percent, silty sand (SM) 34 percent and sand with silt (SP SM) 19 percent
Average clay content about 40 inches down15 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches34 percent of the area
Flood prone soils34 percent of the area
High corrosion risk for uncoated steel23 percent of the area

At Ingleside on the Bay, bedrock is not mapped in the top five feet, but the geologic map shows Cenozoic barrier island deposits made mostly of fine sand. Seasonal water tables are mapped within 60 inches under 34 percent of the area, and flood prone soils under 34 percent, so pits may need pumping and wet sand needs close control. High steel corrosion risk is mapped under 23 percent; the line owner should consider casing and tracer wire materials. The sandy deposits can slough behind the bit, so staged reaming and drilling fluid help support the hole.

How do we bore through sandy clay loam in Ingleside on the Bay?

The USDA soil survey maps sandy clay loam at about 40 inches under 42 percent of Ingleside on the Bay, alongside extensive fine sand. We adjust fluid and reaming to the ground the drill encounters, not just the map.

  1. Fine sand: With fine sand mapped across much of Ingleside on the Bay, we use drilling fluid to support the hole and ream in stages before the pipe pull.
  2. Sandy clay loam: Where this texture is mapped about 40 inches down, we adjust fluid and reaming as the ground changes, then pull the pipe after opening the hole.
  3. Wet ground: Seasonal water tables are mapped under part of Ingleside on the Bay, so we keep pits manageable and pump them if water collects near a street route.
  4. Marked utilities: Before the drill approaches lines near Sunset Drive, we hydrovac pothole each marked utility and use a walkover locator to track depth and pitch.
6 inch Schedule 40 PVC sleeve in a bore pit in sandy soil on a water main crossing at NE 24th Street, Oklahoma City
A 6 inch Schedule 40 PVC sleeve in a bore pit in sandy soil on a water main crossing in Oklahoma City.

Where might a line go under FM 1069 in Ingleside on the Bay?

A bore in Ingleside on the Bay can pass beneath FM 1069, the state highway mapped inside the city limits, or beneath a city street. TxDOT shows no other state highway within 1.5 miles outside the limits. Bayshore Drive is the longest named street in the city, followed by Starlight Drive and Sunset Drive. Their alignments help locate possible service routes, but the exact address and marked utilities determine the bore path. Boring can keep pavement and driveways intact when the route and access allow it.

Public records map no railroad within Ingleside on the Bay or within one mile outside its limits, so there is no mapped track route to plan around here. No streams, named stream crossings or lakes and ponds are mapped in or within one mile of the city. That leaves FM 1069 and streets such as Bayshore Drive as the mapped crossing features to review for a project. If the proposed route changes beyond those mapped features, we check the actual site before setting the bore plan.

Who signs off on a bore in San Patricio County near Ingleside on the Bay?

For an Ingleside on the Bay bore beneath FM 1069, the line owner needs a TxDOT utility permit for work in the state highway right of way, reviewed by the TxDOT Corpus Christi District. The line owner files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that application and work under the owner’s permit. Highway cover is generally at least 60 inches at crossings for water, electric and communication lines, and pressurized sewer lines. City streets such as Bayshore Drive belong to the incorporated city. No railroad or stream crossing is mapped here.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are in the City of Ingleside on the Bay and Ingleside on the Bay?

The City of Ingleside on the Bay public water system uses purchased surface water and lists 385 service connections serving 610 people. AEP Texas Central and San Patricio Electric Cooperative report electric service in San Patricio County; that does not identify the provider at every Bayshore Drive address. We confirm the electric line owner before planning a conduit bore. That check helps set a safe route around existing lines before drilling begins.

Line ownerWhat it isSourceSize
City of Ingleside on the BayPublic water systemSurface water bought from another system385 connections, 610 people served
AEP Texas Central and San Patricio Electric CooperativeElectric utilities reporting service in San Patricio CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Ingleside on the Bay’s median housing year at 1974; 10 percent of homes were built before 1960, 76 percent from 1960 to 1999 and 14 percent in 2000 or later. A replacement route near Starlight Drive may meet older buried service lines, while newer connections can add different crossings. We hydrovac pothole marked utilities along the bore path before drilling near them, since paint shows position but not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

How far is Ingleside on the Bay from Ingleside and our Yukon yard?

Ingleside on the Bay is in San Patricio County, at an elevation of 17 feet, and covers 0.29 square miles of land. ZIP code 78362 serves Ingleside on the Bay, and we use it to route boring details near Bayshore Drive. Ingleside is 2.9 miles north and is the nearest larger city; Corpus Christi is 6.0 miles southeast. Sinton, the county seat, is 22.3 miles northwest. From our Yukon yard, the road distance is 593 miles and the drive is 11.5 hours, which affects mobilization for work on streets such as Bayshore Drive.

Places near Ingleside on the Bay

What kinds of bores come up near Starlight Drive in Ingleside on the Bay?

  • Highway crossing: A bore beneath FM 1069 follows the TxDOT route and needs the line owner’s permit and a plan for required cover.
  • Water service: A route near Bayshore Drive can connect with the City of Ingleside on the Bay water system after the existing line owner and alignment are confirmed.
  • Fiber route: Fiber beneath Starlight Drive can avoid cutting pavement when the bore path and access fit the street setting.
  • Replacement line: A sewer or water replacement near Sunset Drive may pass older services, so marked utilities need exposure before drilling.
  • Electric conduit: Near FM 1069, we confirm the electric line owner before planning a conduit route beneath the state highway.
  • Street crossing: A bore beneath Bayshore Drive can leave the roadway intact while pits sit off the pavement on each side.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore near Bayshore Drive in Ingleside on the Bay?

A map pin matters for a Bayshore Drive quote because the exact route determines which marked utilities and pavement the bore must pass. When we plan a crossing near FM 1069, send us the address or pin, what will go in the ground, the pipe or conduit size, and the footage. A sketch or plans help us review a route near FM 1069 before we prepare the scope.

The job scope sets the price, with ground, crossings and logistics all in the plan. Nueces fine sand and sandy clay loam can change the fluid and reaming approach. A route beneath FM 1069 brings state highway cover and permit details into the work. The number of utilities to expose, pavement, pits, backfill and equipment time also matter. Ingleside on the Bay is 593 road miles from Yukon, so mobilization is another factor. High profile or emergency work can change the planning needs.

Questions people ask about boring in Ingleside on the Bay

Does Trinity Boring Solutions take jobs in San Patricio County for Ingleside on the Bay, and who staffs them?

Yes. We take directional boring work in Ingleside on the Bay, and our own crews and vetted partner contractor crews can staff it. Our Yukon main office coordinates the job, so you work with Trinity from the first call through the bore log, including work near Bayshore Drive.

Who controls Sunset Drive in Ingleside on the Bay, and can we avoid cutting it?

The incorporated city controls its streets, including Sunset Drive. A directional bore can pass beneath the pavement without an open cut when the route and work access allow it. We review the site and marked utilities before setting the bore path, rather than assuming every crossing can use the same approach.

Could an older buried line near Starlight Drive affect a replacement bore in Ingleside on the Bay?

Yes. The American Community Survey estimates the median housing year at 1974, with 76 percent of homes built from 1960 to 1999. A replacement bore near Starlight Drive may encounter older services or later additions, so we expose marked utilities before drilling close to them.

Can groundwater or flood prone Nueces soil affect bore pits in Ingleside on the Bay?

It can. The USDA soil survey maps seasonal water tables within 60 inches under 34 percent of Ingleside on the Bay and flood prone soils under 34 percent. In areas mapped as Nueces soil, we plan pits with wet ground in mind and pump water if it collects.

What ground does a bore pass through in Nueces soil in Ingleside on the Bay?

The USDA soil survey maps Nueces soils under 42 percent of Ingleside on the Bay. At about 40 inches, sandy clay loam is mapped under 42 percent, while fine sand is mapped under 30 percent. These are area patterns, not site borings, so actual ground conditions guide the drilling approach.

Is a bore in Ingleside on the Bay likely to hit rock?

We account for Nueces soil while noting bedrock is not mapped in Ingleside on the Bay’s top five feet, though deeper rock remains possible. The geologic map shows Cenozoic barrier island deposits, mostly fine sand. We plan for the mapped sandy ground and adjust if the bore encounters different conditions.

Can I reach Trinity after hours about an urgent bore near Sunset Drive in Ingleside on the Bay?

Yes. Near Ingleside, we have a person answer Trinity’s phone 24 hours a day at (405) 409-7423. Tell us where the issue is near Sunset Drive and what line or bore is involved so we can understand the urgent work and response needed.

How early should I call Texas811 for a bore by Bayshore Drive in Ingleside on the Bay, and what if marks move?

Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Bayshore Drive start slips more than 14 days past the original notice, make a new request. On San Patricio County crossings, we refresh worn or moved marks through Texas811 before continuing work.

What affects the cost of a directional bore under FM 1069 in Ingleside on the Bay?

The route and scope determine the price, including length, pipe or conduit size, soil, utilities to expose, pavement, pits and equipment time. A bore under FM 1069 also involves highway planning, while Nueces fine sand can affect drilling methods. Mobilization reflects the 593 road miles from Yukon.

Where the Ingleside on the Bay facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Ingleside on the Bay

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Ingleside on the Bay, Texas

Type the address of your job in Ingleside on the Bay. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Ingleside on the Bay

Same county: Aransas Pass · Sinton · Mathis · Taft · Odem · Taft Southwest · St. Paul · Lakeshore Gardens-Hidden Acres · Lake City · Morgan Farm · San Patricio · Rancho Chico. All counties: Texas county list.