Portland Texas Directional Boring: Victoria Clay, US 181 and Gum Hollow
Quick Answer: Portland is an incorporated city, so the city owns its streets; directional boring, also called horizontal directional drilling (HDD), can place lines beneath US 181 without cutting its pavement. The Yukon main office is 587 road miles away, so a Portland crossing near Gum Hollow needs mobilization planning. The USDA survey maps Victoria clay across much of Portland, where sticky soil can cling to a reamer and grip pipe. Staged reaming and a same day pull help limit that exposure on a Lang Road service run.
Portland bores at a glance
- Incorporated city in San Patricio County, Texas. Population 20,725 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 587 miles, about 11.4 hours of driving.
- Ground: Victoria soil is mapped on 46 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 181, Texas State Highway 35, FM 893, FM 2986 and FM 3239. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Gum Hollow.
- Public water: City of Portland, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone handle directional boring near Gum Hollow in Portland?
Trinity takes directional boring work in Portland, San Patricio County, where the Census Bureau Vintage 2024 estimate is 20,725 people. Portland is an incorporated city, so its streets are city owned; our water, sewer, gas, electric conduit and fiber bores can run beneath streets such as Lang Road or Moore Avenue.
Our main office is in Yukon, Oklahoma, and Portland work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa, Oklahoma. Beside that reach, a Portland service line is a smaller job, but Victoria clay and street access still shape its plan.

What is Victoria soil like to bore in Portland?
The USDA soil survey maps Victoria as Portland’s leading soil series, covering 46 percent of the city. Victoria clay with 0 to 1 percent slopes accounts for 42 percent of mapped area. At about 40 inches below the surface, clay is the mapped texture across 69 percent of Portland, and the average clay content there is 51 percent. Surface soil is clay across 56 percent of the area. These mapped patterns are not test borings, but they point to sticky cuttings that can gather on a reamer and resist pipe pullback.
| USDA soil survey, inside the Portland city limits | What is mapped |
|---|---|
| Soil series mapped | Victoria 46 percent, Raymondville 14 percent, Calallen 6 percent, Banquete 4 percent and Monteola 4 percent |
| Texture at the surface | clay 56 percent, clay loam 14 percent and sandy clay loam 6 percent |
| Texture about 40 inches down | clay 69 percent and sandy clay loam 9 percent |
| Engineering class about 40 inches down | fat clay (CH) 55 percent and lean clay (CL) 22 percent |
| Average clay content about 40 inches down | 51 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 5 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 68 percent of the area |
In Portland, the USDA survey places mapped bedrock below the top five feet, not within them, so deeper rock is not ruled out. A seasonal water table within 60 inches is mapped in 5 percent of the area, while flood prone soils cover 3 percent. High steel corrosion risk is mapped across 68 percent, a reason for the line owner to consider casing and tracer wire materials; HDPE does not share that concern. The geologic map shows Delta silt and clay of Late Pleistocene age, including plastic and compressible clay and mud.
How do we bore Portland’s mapped clay?
Portland’s clay can hold an open bore, then stick to the reamer or grip the pipe. Around Victoria soil, we manage fluid returns and keep the hole open only as long as the pull requires.
- In Portland’s heavy Victoria clay, we use thinner drilling fluid with polymer and ream in stages so sticky cuttings do not build up on the tool.
- Because clay is mapped across 69 percent of Portland at about 40 inches, we watch returns closely and keep fluid pressure down near pavement to avoid lifting it.
- We expose each marked utility along a Portland bore path with hydrovac potholing before drilling close; paint by Moore Avenue shows position, not depth.
- A walkover locator follows the drill head along streets such as Lang Road, while we log depth and pitch at each rod and pull pipe the day the hole opens.

What might a Portland bore cross near US 181?
US 181 and Texas State Highway 35 each have 10.4 mapped roadway miles inside Portland. FM 893 has 7.2 miles, while FM 2986 has 2.7 miles. A bore beneath those routes has to account for the highway right of way and pavement. Lang Road runs 3.02 miles in the city, Memorial Parkway 3.09 miles, and Moore Avenue 2.41 miles. Those long street corridors offer multiple possible service routes, but each crossing still needs a path planned around pavement and marked utilities.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 181 | US highway | 10.4 roadway miles inside | State highway office |
| Texas State Highway 35 | State highway | 10.4 roadway miles inside | State highway office |
| FM 893 | State highway | 7.2 roadway miles inside | State highway office |
| FM 2986 | State highway | 2.7 roadway miles inside | State highway office |
| FM 3239 | State highway | 1 roadway miles inside | State highway office |
| Texas State Highway 361 | Highway nearby | 1 miles outside | State highway office |
| Spur 202 | Highway nearby | 1.2 miles outside | State highway office |
| Union Pacific | Railroad nearby | 0.1 miles outside | The railroad |
| Gum Hollow | Stream | 0.26 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Sunset Lake | Lake or pond | 73 acres, inside | Checked for Corps of Engineers jurisdiction |
No railroad runs inside Portland, and none of the mapped street and rail crossings is inside the city. Union Pacific track lies 0.1 miles beyond the limits, so a route that reaches it brings a railroad crossing into the plan. Gum Hollow has 0.26 channel miles in Portland, with one mapped street crossing of a named stream. Sunset Lake covers 73 acres inside the limits. A route near these water features needs its own crossing review.
Do Portland bores near Union Pacific need approval?
US 181, Texas State Highway 35 and FM 893 are state routes, so a bore in their right of way needs a TxDOT utility permit reviewed by the TxDOT Corpus Christi District. The utility that owns the line submits through TxDOT’s RULIS system; we prepare the bore plan and profile for that application and work under the owner’s permit. Portland owns its city streets, including Lang Road. A crossing of the Union Pacific track just outside Portland needs an agreement with the railroad, which sets crossing conditions. Gum Hollow is checked for U.S. Army Corps of Engineers jurisdiction during water crossing planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns utility lines in San Patricio County near Portland?
The City of Portland public water system uses purchased surface water and lists 9,869 service connections serving 22,933 people. In San Patricio County, electric service is reported by AEP Texas Central and San Patricio Electric Cooperative. Those reports do not identify the provider at every Portland address, so we confirm the line owner before planning an electric conduit bore near a street such as Moore Avenue.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Portland | Public water system | Surface water bought from another system | 9,869 connections, 22,933 people served |
| AEP Texas Central and San Patricio Electric Cooperative | Electric utilities reporting service in San Patricio County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put Portland’s median housing year at 1985; 9 percent of homes were built before 1960, 56 percent from 1960 to 1999, and 35 percent in 2000 or later. Replacements and new service runs can follow different routes under Lang Road. We expose each marked utility on the bore path with hydrovac potholing before drilling near it; a line under Lang Road needs its position and depth checked before the drill approaches.

Where does Portland sit relative to Taft Southwest?
Portland is primarily in San Patricio County, with some portions in Nueces County, at an elevation of 37 feet across 12.13 square miles. Its ZIP codes are 78374, 78390 and 78359. Taft Southwest and Taft are 7.3 miles northwest; Gregory is 3.4 miles northeast, and Ingleside is 7.7 miles east. Corpus Christi is 13.4 miles southeast, while Sinton, the county seat, is 14.6 miles northwest. From our Yukon yard, Portland is 587 road miles and a 11.4 hour drive, which affects mobilization for a bore on Memorial Parkway.
Places near Portland
- Directional boring in Gregory: 3.4 miles northeast
- Directional boring in Taft Southwest: 7.3 miles northwest
- Directional boring in Taft: 7.3 miles northwest
- Directional boring in Ingleside: 7.7 miles east
- Directional boring in Ingleside on the Bay: 7.9 miles southeast
- Directional boring in Corpus Christi: 13.4 miles southeast
What bores might be needed along Lang Road in Portland?
- Highway crossing: A line beneath US 181 needs a bore plan that accounts for travel lanes, pavement and the TxDOT right of way.
- Water service: A connection near Moore Avenue can tie into the Portland public water system, with the route checked against marked utilities.
- Fiber conduit: A run along Memorial Parkway can use a narrow bore to pass beneath pavement and keep the street surface intact.
- Creek crossing: A route near Gum Hollow needs channel depth planning and a review of U.S. Army Corps of Engineers jurisdiction.
- Rail crossing: A route reaching the Union Pacific track just beyond Portland’s limits needs an agreement with the railroad.
- Drainage bore: A line near Sunset Lake can pass below surface improvements, with pits set in dirt on each side.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I price a Portland bore near Memorial Parkway?
For a Portland quote, give us the address or map pin, what will go below Memorial Parkway, pipe or conduit size and footage, with a sketch or plans if available. That lets us place the proposed route against nearby pavement, utilities and access before sizing the work. A line crossing Memorial Parkway needs a different layout from a short service run beside it.
We set the price from the work at the specific Portland site. Victoria clay comes first because sticky ground can call for fluid control and staged reaming. Length, pipe or conduit size and the number of utilities to expose also matter. Pavement on US 181, a creek or drainage crossing near Gum Hollow, pits, excavator time and sand backfill change the scope. Mobilization reflects the 587 road miles from Yukon, and high profile or emergency work can add requirements.
Questions people ask about boring in Portland
Does Trinity take directional boring jobs in San Patricio County near Portland?
Yes. We take directional boring work in Portland and across Texas, with work staffed by our own crews or partner drilling contractors we have vetted. The Portland customer deals with Trinity from the first call through the bore log, including a job routed beneath US 181.
What do Portland homes near Lang Road mean for replacement bores?
Portland’s median housing year is 1985, and 9 percent of homes were built before 1960. A replacement route near Lang Road may meet older buried lines as well as newer service connections. We expose marked utilities along the planned path before drilling near them.
Does Victoria soil in Portland corrode steel, and what pipe should I use?
The USDA survey maps high steel corrosion risk across 68 percent of Portland. The line owner should weigh that when selecting steel casing or tracer wire materials. HDPE is not affected by this soil corrosion risk, and the choice depends on the line being installed near Victoria soil.
What ground does a Portland bore pass through around Victoria soil?
Victoria is Portland’s leading mapped soil series at 46 percent of the area. About 40 inches down, clay is mapped across 69 percent, with an average clay content of 51 percent. These are USDA survey patterns, not test borings, but they indicate a sticky ground profile for a bore near Lang Road.
Will a Portland bore hit rock near Gum Hollow?
The USDA mapping does not show bedrock in Portland’s upper five feet, but that does not rule out rock deeper down near Gum Hollow. The geologic map identifies Delta silt and clay of Late Pleistocene age, including clay and mud. A site specific route still needs to be planned for actual conditions.
Who approves a Portland bore under US 181?
TxDOT reviews a utility permit for work in the US 181 right of way through its Corpus Christi District. The line owner files in TxDOT’s RULIS system, using the bore plan and profile we prepare. Highway pavement crossings are bored or tunneled rather than open trenched.
What bore sizes and lengths can you handle near Moore Avenue in Portland?
For a Portland job near Moore Avenue, our equipment range covers 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The needed size and length depend on the line, route and site conditions. A sketch helps us assess the proposed run.
How much notice does Texas811 need for a Portland bore near Memorial Parkway?
For a bore near Memorial Parkway, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. Texas811 describes that as at least two working days. Worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of a Portland directional bore under US 181?
The scope near US 181 matters more than any one item. Length, pipe size, Portland’s sticky clay, utilities that need exposure, pavement, pits and any creek or drainage crossing all affect the work. Mobilization from Yukon also enters the plan, as do high profile or emergency conditions. We price the specific route, not a standard template.
Where the Portland facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Portland
- U.S. Census Bureau, TIGER/Line 2024: Portland boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Portland
- U.S. Census Bureau, American Community Survey 2019 to 2023: Portland housing units and year built
- Macrostrat geologic map compilation: map units under Portland
- U.S. EPA Safe Drinking Water Information System: public water systems serving Portland
- U.S. Department of Transportation, North American Rail Network: track owners in San Patricio County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving San Patricio County
- U.S. Geological Survey, Elevation Point Query Service: Portland elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Portland
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Portland
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Portland, Texas
Type the address of your job in Portland. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Portland
Same county: Aransas Pass · Sinton · Mathis · Odem · St. Paul · Lakeshore Gardens-Hidden Acres · Lake City · Morgan Farm · San Patricio · Rancho Chico · Lakeside · Edroy. All counties: Texas county list.
