Gregory Texas Directional Boring: Victoria Clay, US 181, Union Pacific
Quick Answer: What does the top five feet of ground look like in Gregory, and what is under it? The USDA soil survey maps Victoria clay and clay rich soils, while bedrock is not mapped in the top five feet; the geologic map shows the Beaumont Formation below. We install lines with directional boring, also called horizontal directional drilling (HDD), beneath roads such as US 181. Gregory is 583 road miles from our Yukon, Oklahoma main office, a factor for work near Union Pacific track.
Gregory bores at a glance
- Incorporated city in San Patricio County, Texas. Population 1,717 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 583 miles, about 11.3 hours of driving.
- Ground: Victoria soil is mapped on 33 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 181, Texas State Highway 35, FM 136, Spur 202 and FM 3284. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: Union Pacific, with 12 mapped street and rail crossings.
- Public water: City of Gregory, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near US 181 in Gregory?
Trinity Boring Solutions takes directional boring work in Gregory, San Patricio County, for lines along US 181, South Gregory and other local routes. What does the top five feet look like, and what is under it? The USDA soil survey maps clay rich ground, and bedrock is not mapped in that depth. The Census Bureau Vintage 2024 estimate puts Gregory at 1,717 residents. Our crews install water, sewer, gas, electric conduit and fiber lines beneath roads and service routes.
Our main office is in Yukon, Oklahoma, and Gregory work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. Our family business began in 1965 and has done directional boring since 1982; a Gregory route near South Gregory would be a different scale of job.

How does Gregory’s Victoria soil affect a bore?
Victoria soil is the largest mapped soil series in Gregory, covering 33% of the city, and the USDA soil survey also maps Banquete at 27% and Raymondville at 24%. At about 40 inches below the surface, clay is mapped across 83% of the area and sandy clay loam across 17%; no sandy area is mapped at that depth. The average clay content there is 47%. These mapped patterns point to sticky ground that can hold an open hole but build up on a reamer.
| USDA soil survey, inside the Gregory city limits | What is mapped |
|---|---|
| Soil series mapped | Victoria 33 percent, Banquete 27 percent, Raymondville 24 percent, Calallen 10 percent and Imogene 7 percent |
| Texture at the surface | clay 59 percent, clay loam 24 percent and sandy clay loam 10 percent |
| Texture about 40 inches down | clay 83 percent and sandy clay loam 17 percent |
| Engineering class about 40 inches down | fat clay (CH) 59 percent and lean clay (CL) 41 percent |
| Average clay content about 40 inches down | 47 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 56 percent of the area |
Bedrock is not mapped in Gregory’s top five feet, and seasonal water table and flood prone soils are not mapped. The geologic map shows the Beaumont Formation, areas predominantly clay, from the Pleistocene; its clay and silt have low permeability. Heavy clay can swell and grip pipe, so staged reaming and careful fluid returns matter. The USDA soil survey maps high steel corrosion risk across 56% of Gregory, a concern for uncoated steel casing and tracer wire; the line owner selects coatings, while HDPE does not share that soil corrosion concern.
What do we need to bore through Gregory clay?
Gregory’s clay rich Victoria and Banquete soils call for a steady hole plan, not excess drilling fluid. We adapt the reaming and pullback to the ground beneath the route, whether it is South Gregory or US 181.
- Victoria and Banquete clay can cling to a reamer, so we use thinner drilling fluid and staged reaming before pulling pipe along a route near South Gregory.
- Heavy clay mapped in Gregory calls for watching fluid returns closely, especially where a bore approaches pavement on US 181.
- Before the drill nears marked lines around the City of Gregory water system, we use hydrovac potholing to check their actual depth.
- We track the drill head from the surface and log depth and pitch as the bore advances beneath 4th Street or another Gregory crossing.

What is in the way of a new line in Gregory near Union Pacific?
Gregory has US 181 and Texas State Highway 35 inside its limits, along with FM 136, Spur 202, FM 3284, Texas State Highway 361 and FM 2986. South Gregory is the longest named street at 1.31 miles, followed by Avenue C at 1.27 miles and 4th Street at 0.8 miles. A route beneath a road or driveway can use a bore to leave the pavement intact; the exact path depends on the marked utilities and access at the crossing.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 181 | US highway | 2.5 roadway miles inside | State highway office |
| Texas State Highway 35 | State highway | 3.3 roadway miles inside | State highway office |
| FM 136 | State highway | 1.3 roadway miles inside | State highway office |
| Spur 202 | State highway | 1.1 roadway miles inside | State highway office |
| FM 3284 | State highway | 1 roadway miles inside | State highway office |
| Texas State Highway 361 | State highway | 0.5 roadway miles inside | State highway office |
| FM 2986 | State highway | 0.1 roadway miles inside | State highway office |
| Union Pacific | Railroad | 3.36 track miles inside | The railroad |
Union Pacific track runs 3.36 miles through Gregory, and public maps show 12 street and rail crossings in the city. A bore beneath the track needs an agreement from Union Pacific, which sets crossing conditions such as casing, depth and flagging. No named streams or lakes are mapped in Gregory or within one mile, though 0.56 miles of unnamed drainage are mapped in the city. A drainage crossing still needs site planning.
Do I need a permit to bore in Gregory or San Patricio County?
US 181 and Texas State Highway 35 are state highways, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Corpus Christi District. The line owner, not the drilling contractor, files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. Gregory is incorporated, so streets such as 4th Street belong to the city itself. A Union Pacific track crossing needs an agreement with the railroad, and TxDOT asks for a copy if the line also occupies highway right of way.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines we work around near the City of Gregory water system?
The City of Gregory public water system is locally owned and uses purchased surface water; it lists 856 service connections and serves 1,760 people. AEP Texas Central and San Patricio Electric Cooperative report electric service in San Patricio County, but the line owner must be confirmed for the specific Gregory address before planning an electric conduit bore. Near the city water system, identifying each marked line helps set a safe route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Gregory | Public water system | Surface water bought from another system | 856 connections, 1,760 people served |
| AEP Texas Central and San Patricio Electric Cooperative | Electric utilities reporting service in San Patricio County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates place Gregory’s median housing year at 1976, a context we consider when planning underground work. It estimates 24% of homes were built before 1960, 52% from 1960 to 1999 and 24% in 2000 or later. That mix can mean a project is replacing an older line or adding a service. Before a bore near the City of Gregory water system or an electric conduit, we hydrovac expose marked utilities; Texas811 paint shows position, not depth.

What is near Gregory, including Portland?
Gregory is in San Patricio County, 15.1 miles southeast of the county seat, Sinton. The incorporated city covers 1.53 square miles, sits at an elevation of 31 feet and uses ZIP code 78359. Portland is 3.4 miles southwest; Tradewinds is 5.3 miles north, Ingleside is 6.2 miles southeast, Falman is 7.3 miles east and Taft is 7.4 miles northwest. From our Yukon, Oklahoma main office, Gregory is 583 road miles away, an 11.3 hour drive that affects mobilization for a job near US 181.
Places near Gregory
- Directional boring in Portland: 3.4 miles southwest
- Directional boring in Tradewinds: 5.3 miles north
- Directional boring in Ingleside: 6.2 miles southeast
- Falman: 7.3 miles east
- Directional boring in Taft: 7.4 miles northwest
What boring work comes up near 4th Street in Gregory?
- Highway crossing: A bore beneath US 181 can carry a water or fiber line without cutting the existing roadway.
- Street service: A water or sewer connection along 4th Street can be routed beneath pavement with entry and exit pits in the dirt.
- Water connection: A service near the City of Gregory system needs its marked water lines exposed before drilling close to them.
- Rail crossing: A line beneath Union Pacific track needs railroad agreement and crossing conditions for the planned route.
- Electric conduit: Before planning a conduit route near South Gregory, confirm the electric line owner for that address.
- Drainage route: The 0.56 miles of unnamed drainage in Gregory call for checking the route and bore depth at the crossing.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Gregory bore near South Gregory?
For a Gregory quote, start with where the work is, such as a map pin near South Gregory. Tell us what is going in the ground, such as a water line near the City of Gregory system, then the pipe or conduit size and the footage. A sketch or plans showing a route across US 181 help us review the crossing.
The 583 road miles from Yukon come first in planning mobilization for a Gregory job. Then the Victoria and Banquete clay, pipe size and bore length shape the work. A route under US 181 or Union Pacific track adds crossing coordination; pavement, marked utilities, pits, excavator time and sand backfill can also affect the scope. Creek or drainage crossings and high profile or emergency work change the plan as well.
Questions people ask about boring in Gregory
Does Trinity Boring Solutions take jobs in Gregory, San Patricio County, and who staffs them?
Yes, we take directional boring work in Gregory, San Patricio County. We use our own crews and partner contractor satellite yards, with Trinity managing the job from the first call through the bore log. That gives customers working near US 181 one point of contact.
Does Gregory’s Victoria soil create a corrosion concern, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across 56% of Gregory, including areas with Victoria soil. The line owner selects coatings for steel casing or tracer wire. HDPE is not affected by that soil corrosion concern, so the material choice depends on the line and project plan.
What ground does a Gregory bore pass through in Victoria soil?
The USDA soil survey maps Victoria soil across 33% of Gregory, with clay mapped across 83% of the area at about 40 inches deep. That clay can be sticky and hold an open hole, so staged reaming and suitable drilling fluid help manage a bore near South Gregory.
Could we hit rock while boring in Gregory?
Bedrock is not mapped in Gregory’s top five feet, but the geologic map shows the Beaumont Formation, areas predominantly clay, below. That map describes clay and silt, not test borings, so the route still needs to be assessed for the planned depth near US 181.
Who approves our bore beneath US 181 in Gregory?
TxDOT reviews a utility permit for work in the US 181 right of way through its Corpus Christi District. The utility owner files in the online RULIS system, while we prepare the bore plan and profile for the application. The issued permit governs the work under that highway.
Who owns the track at a Gregory Union Pacific crossing, and what does a bore need?
Union Pacific owns the track mapped through Gregory, which runs 3.36 miles within the city. A bore under that track needs an agreement with the railroad. Its crossing terms address matters such as casing, depth and flagging for the planned line.
Does Trinity cover Portland and rural sites outside Gregory?
We take work in Portland, 3.4 miles southwest of Gregory, and at rural sites outside the city limits. A project near US 181 or the City of Gregory water system still needs an address or map pin so we can assess its route, crossings and access.
How much notice does Texas811 need for a bore near South Gregory, and what if marks move?
For a bore near South Gregory, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.
Near US 181 in Gregory, we assess crossing conditions and required work when pricing directional boring?
The Gregory job scope sets the price: bore length, pipe or conduit size, Victoria clay, marked utilities, pavement and crossings such as US 181 or Union Pacific track all matter. Pits, excavator time, backfill, emergency work and mobilization from Yukon can also affect the work plan. We review the route details before pricing.
Where the Gregory facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Gregory
- U.S. Census Bureau, TIGER/Line 2024: Gregory boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Gregory
- U.S. Census Bureau, American Community Survey 2019 to 2023: Gregory housing units and year built
- Macrostrat geologic map compilation: map units under Gregory
- U.S. EPA Safe Drinking Water Information System: public water systems serving Gregory
- U.S. Department of Transportation, North American Rail Network: track owners in San Patricio County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving San Patricio County
- U.S. Geological Survey, Elevation Point Query Service: Gregory elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Gregory
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Gregory
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Gregory, Texas
Type the address of your job in Gregory. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Gregory
Same county: Aransas Pass · Sinton · Mathis · Odem · Taft Southwest · Ingleside on the Bay · St. Paul · Lakeshore Gardens-Hidden Acres · Lake City · Morgan Farm · San Patricio · Rancho Chico. All counties: Texas county list.
