trinityboringsolutions.com

Pleasant Valley Texas Directional Boring: Winters Loam, US 287 Business and BNSF Railway

Quick Answer: Winters loam and deeper clay shape bores near US 287 Business; clay can cling to tooling and grip pipe. We take directional boring, also called horizontal directional drilling (HDD), in Pleasant Valley, Texas, for routes under US 287 Business and BNSF Railway. Pleasant Valley is 146 road miles from our Yukon, Oklahoma main office, with Huntington Lane among the local routes a project may follow. The mapped clay can hold an open hole, but sticky returns call for controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Pleasant Valley bores at a glance

  • Incorporated city in Wichita County, Texas. Population 359 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 146 miles, about 2.8 hours of driving.
  • Ground: Winters soil is mapped on 33 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 4 percent of the area.
  • Highways inside the boundary: US 287 Business, FM 369 and FM 367. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: BNSF Railway, with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Middle Fork Pond Creek, North Side Canal, East Fork Pond Creek and West Fork Pond Creek.
  • Public water: Town of Pleasant Valley, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near US 287 Business in Pleasant Valley?

Winters loam and deeper clay shape drilling conditions, and Trinity Boring Solutions takes directional boring work in Pleasant Valley, Wichita County. The Census Bureau Vintage 2024 estimate puts the town at 359 people. We install water, sewer, gas, electric conduit and fiber, including lines routed beneath Huntington Lane, Old Iowa Park Road or toward US 287 Business. The line size and path guide the setup.

Our main office is in Yukon, Oklahoma, and Pleasant Valley work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, with directional boring part of our work since 1982; the 3/4 inch service line to 48 inch casing range covers the scale between a service along Old Iowa Park Road and a larger crossing at US 287 Business.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does the USDA survey map around Pleasant Valley and Winters soil?

The USDA soil survey maps Winters soil across 33 percent of Pleasant Valley and Deandale across 32 percent. Surface textures are mainly silt loam, mapped under 43 percent, and loam, under 42 percent. About 40 inches down, the survey maps clay under 44 percent of the area and sandy clay under 33 percent; heavy clay makes up 77 percent at that depth. We treat mapped patterns as planning references, not test borings, when assessing underground work in Pleasant Valley. Clay can cling to a reamer and grip the pipe, so the actual bore route still needs field review.

USDA soil survey, inside the Pleasant Valley city limitsWhat is mapped
Soil series mappedWinters 33 percent, Deandale 32 percent, Mangum 10 percent, Clairemont 6 percent and Frankirk 5 percent
Texture at the surfacesilt loam 43 percent, loam 42 percent and silty clay loam 6 percent
Texture about 40 inches downclay 44 percent, sandy clay 33 percent and silty clay loam 11 percent
Engineering class about 40 inches downlean clay (CL) 84 percent and fat clay (CH) 12 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inches4 percent of the area (0 percent hard rock, 4 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils23 percent of the area
High corrosion risk for uncoated steel82 percent of the area

Bedrock is mapped within 60 inches in 4 percent of Pleasant Valley, with a typical mapped depth of 33 inches; most of the area has no bedrock shown in that interval. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 23 percent. High steel corrosion risk is mapped under 82 percent, so the line owner should consider casing and tracer wire materials; HDPE avoids that soil concern. The Cenozoic terrace deposits include sand, silt, clay and gravel, with Permian sedimentary rock also mapped.

How do we plan a clay bore in Pleasant Valley?

In Pleasant Valley, mapped clay and loam call for a controlled bore, not a fast pull through the ground. Around Huntington Lane, we match the fluid and reaming plan to the route and expose marked utilities first.

  1. Winters loam and mapped clay can leave sticky material on the reamer, so we use a thinner fluid and polymer suited to the ground near Huntington Lane.
  2. Where deeper clay is present, staged reaming helps manage the hole; we plan the pipe pull for the same day the bore is opened.
  3. Before drilling near a marked line on Old Iowa Park Road, we hydrovac pothole to find its depth instead of relying on paint alone.
  4. We track the drill head from the surface and log depth and pitch as it advances, including on routes planned near Middle Fork Pond Creek.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Where might a line go under Huntington Lane in Pleasant Valley?

Pleasant Valley has US 287 Business, FM 369 and FM 367 inside its limits, with US 287 just 0.1 miles beyond them. US 287 Business accounts for 2.2 mapped roadway miles in town. Huntington Lane is the longest named street at 2.41 miles; Old Iowa Park Road and Iowa Park Road each have 0.84 miles in town. A route beneath one of these roads needs a plan for its pavement and the marked utilities along the approach.

CrossingTypeMapped extentWho has a say
US 287 BusinessUS highway2.2 roadway miles insideState highway office
FM 369State highway0.7 roadway miles insideState highway office
FM 367State highway0.3 roadway miles insideState highway office
US 287Highway nearby0.1 miles outsideState highway office
BNSF RailwayRailroad1.62 track miles insideThe railroad
Middle Fork Pond CreekStream2.65 channel miles insideChecked for Corps of Engineers jurisdiction
North Side CanalStream1.53 channel miles insideChecked for Corps of Engineers jurisdiction
East Fork Pond CreekStream1.06 channel miles insideChecked for Corps of Engineers jurisdiction
West Fork Pond CreekStream0.1 channel miles insideChecked for Corps of Engineers jurisdiction
Big Wichita RiverStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 1.62 track miles in Pleasant Valley, on the BNSF Railway Red River Valley Subdivision. Public mapping records 3 street and rail crossings in town. Middle Fork Pond Creek runs 2.65 channel miles here, alongside North Side Canal at 1.53 miles and East Fork Pond Creek at 1.06 miles. Six street crossings of named streams are mapped. A creek route needs a depth plan under the channel; no lakes or ponds are mapped within one mile.

Who approves a Pleasant Valley bore in Wichita County?

For a line crossing US 287 Business, the cover depth is a key part of the bore plan: electric and communication lines need 60 inches at a highway crossing, while water lines need 60 inches and pressurized sewer lines need 60 inches. Along a right of way, the stated cover is 48 inches for electric and communication, and 36 inches for water. The line owner applies through TxDOT’s RULIS system, and the TxDOT Wichita Falls District reviews the utility permit. We prepare the bore plan and profile for the owner’s application.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near the Town of Pleasant Valley water system?

The Town of Pleasant Valley public water system uses purchased surface water and serves 330 people through 228 service connections. That gives a water line route on Huntington Lane or Old Iowa Park Road a local system to account for, though the owner of a particular line needs confirmation. AEP Texas North and Oncor Electric Delivery Company report electric service in Wichita County; we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Town of Pleasant ValleyPublic water systemSurface water bought from another system228 connections, 330 people served
AEP Texas North and Oncor Electric Delivery CompanyElectric utilities reporting service in Wichita CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

For underground planning in Pleasant Valley, we account for its 1983 median housing year in the American Community Survey 2019 to 2023 five year estimates. We use the reported housing ages to shape underground planning in Pleasant Valley: 13 percent before 1960, 69 percent from 1960 to 1999 and 18 percent in 2000 or later. A proposed replacement along Huntington Lane and a new service near Old Iowa Park Road may meet different buried lines. We hydrovac pothole marked utilities on the bore path before drilling near them; paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

What is near Pleasant Valley and Iowa Park?

Pleasant Valley is in Wichita County, at an elevation of 976 feet, and covers 2.61 square miles. We use ZIP codes 76367 and 76305 to identify Pleasant Valley locations when coordinating underground bore plans. Wichita Falls lies 4.7 miles southeast and is both the county seat and the nearest larger city; Iowa Park is 5.1 miles west. Lakeside City is 8.2 miles southeast, Cashion Community is 8.6 miles northeast and Burkburnett is 9.6 miles north. From our Yukon yard, the drive is 146 road miles and 2.8 hours, which is part of planning mobilization for work near US 287 Business.

Places near Pleasant Valley

Which jobs call for a bore near Old Iowa Park Road in Pleasant Valley?

  • Highway crossing: A route beneath US 287 Business can keep the pavement intact, with the bore plan accounting for the highway right of way.
  • Water service: A service near Huntington Lane can connect with the Town of Pleasant Valley system after the line owner and route are confirmed.
  • Fiber route: A conduit bore along Old Iowa Park Road can pass beneath pavement without cutting the street surface.
  • Creek crossing: A route under Middle Fork Pond Creek needs planned depth below the channel and a check for federal jurisdiction.
  • Rail crossing: A bore beneath BNSF Railway requires an agreement with the track owner before the crossing is planned.
  • Utility replacement: Work near homes along Iowa Park Road can use potholing to locate marked lines before the drill approaches.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Pleasant Valley bore near Middle Fork Pond Creek?

For a quote in Pleasant Valley, start with an address or map pin, such as a point on Huntington Lane. Tell us what will go in the ground, such as water or fiber, then the pipe or conduit size and estimated footage. A sketch or plans help show whether the route approaches US 287 Business, BNSF Railway or Middle Fork Pond Creek.

The 146 road miles from Yukon are part of mobilization planning for Pleasant Valley. Winters clay can call for staged reaming, while a route under US 287 Business or BNSF Railway adds crossing work. Price also reflects length, pipe or conduit size, soil and rock, utility exposures, pavement, creek or drainage crossings, pits, excavator time and sand backfill. High profile or emergency work can add requirements, as can a route near Middle Fork Pond Creek.

Questions people ask about boring in Pleasant Valley

Does Trinity Boring Solutions take jobs in Pleasant Valley, Wichita County, and how are crews assigned?

Yes, Trinity Boring Solutions takes directional boring work in Pleasant Valley, Wichita County. Our crews or crews from satellite yards operated by drilling partners we have vetted can handle the work. Customers coordinate with Trinity from the first call through the bore log, whether the crew is working near Huntington Lane or US 287 Business.

Does Winters soil in Pleasant Valley corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk under 82 percent of Pleasant Valley, including areas mapped as Winters soil. That is a reason for the line owner to consider material and coatings for steel casing or tracer wire. HDPE is not affected by soil corrosion, but the owner selects the material for a route near Old Iowa Park Road.

What ground will a bore pass through in Pleasant Valley near Winters soil?

The USDA soil survey maps Winters soil under 33 percent of Pleasant Valley and Deandale under 32 percent. About 40 inches down, clay is mapped under 44 percent and sandy clay under 33 percent. Those are survey patterns rather than test borings, so the route near Huntington Lane still needs field assessment for sticky clay and changing ground.

Will a bore in Pleasant Valley hit rock near Middle Fork Pond Creek?

The survey maps bedrock within 60 inches in 4 percent of Pleasant Valley, with a typical depth of 33 inches, so shallow rock may affect some routes. Cenozoic terrace deposits and Permian sedimentary rock are also mapped. Those map units do not establish conditions at a specific bore point near Middle Fork Pond Creek.

Who approves a Pleasant Valley bore under US 287 Business?

The line owner applies for a utility permit in TxDOT’s RULIS system, and the TxDOT Wichita Falls District reviews work in Wichita County. For Pleasant Valley work, we prepare the bore plan and profile under the permit issued to the utility owner. For a highway crossing beneath US 287 Business, the required cover depends on the type of line and the permit.

What does a Pleasant Valley bore under BNSF Railway need?

A crossing under BNSF Railway needs an agreement from the railroad that owns the 1.62 track miles in Pleasant Valley. The agreement sets crossing conditions such as casing, depth and flagging. That coordination matters for any proposed route beneath the BNSF Railway Red River Valley Subdivision.

Does being near Wichita Falls change the cost of a Pleasant Valley bore?

Pleasant Valley is 146 road miles and a 2.8 hour drive from our Yukon, Oklahoma main office, so distance is part of mobilization planning. The route also matters: Winters clay, pavement on US 287 Business, utility exposures and a crossing near BNSF Railway can affect the work involved.

How early should I call Texas811 for a Pleasant Valley bore on Huntington Lane?

For a bore along Huntington Lane, Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Texas811 describes this as at least two working days. If work moves more than 14 days past the original notice, make a new request; have worn or moved marks refreshed before work continues.

What affects the cost of directional boring in Pleasant Valley under US 287 Business?

The job details set the price, including footage, pipe or conduit size, ground conditions, utility exposures and pavement. A route under US 287 Business may involve highway crossing requirements; Winters clay can affect the drilling approach. Creek crossings, pits, excavator time, backfill, urgency and mobilization from Yukon also affect the scope.

Where the Pleasant Valley facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Pleasant Valley

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Pleasant Valley, Texas

Type the address of your job in Pleasant Valley. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Pleasant Valley

Same county: Electra. All counties: Texas county list.