Impact Texas Directional Boring: Mangum Silty Clay, Elm Creek, US 83
Quick Answer: Near Impact, US 83, US 277 and Interstate 20 sit just outside town, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Texas for routes around those corridors. Impact is 291 road miles from our Yukon, Oklahoma main office, so a bore by Elm Creek needs mobilization planned with the route. The USDA soil survey maps Mangum silty clay loam across 28 percent of town, and sticky clay can load a reamer and grip pipe. Along Impact Drive, we expose marked utilities before the drill approaches.
Impact bores at a glance
- Incorporated city in Taylor County, Texas. Population 21 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 291 miles, about 5.7 hours of driving.
- Ground: Mangum soil is mapped on 55 percent of the area, with silty clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- No state or US highway is mapped inside the boundary. Closest: US 83, US 277 and Interstate 20.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Elm Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Elm Creek in Impact?
Trinity Boring Solutions takes directional boring work in Impact, an incorporated town in Taylor County where the Census Bureau Vintage 2024 estimate is 21 people. Along Impact Drive, Clinton Street or a service route toward Elm Creek, we install water, sewer, gas, electric conduit and fiber by bore when the alignment suits the site.
Our main office is in Yukon, Oklahoma, and Impact work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our reach includes a roughly 4,100 foot, 48 inch pipe bore under the Arkansas River in Tulsa, Oklahoma. Along Impact Drive, a typical job is a smaller service line or conduit route planned for its crossings and access. For directional boring in Impact, our family business brings roots dating to 1965 and experience since 1982.

What does the soil survey show for Mangum soil in Impact?
The USDA soil survey maps Mangum soil series across 55 percent of Impact, with Mangum silty clay loam covering 28 percent of the town. Clairemont soils account for 39 percent of the series map, and Colorado soils for 6 percent. At about 40 inches, the survey maps silty clay under 55 percent of the area and silty clay loam under 39 percent; average clay content at that depth is 41 percent. For Impact planning, we treat mapped patterns in silty clay as guides, not test borings. The clay can stay in the reamer and tighten around pipe, so we plan the fluid and reaming sequence for the ground along Elm Creek.
| USDA soil survey, inside the Impact city limits | What is mapped |
|---|---|
| Soil series mapped | Mangum 55 percent, Clairemont 39 percent and Colorado 6 percent |
| Texture at the surface | silty clay loam 94 percent and loam 6 percent |
| Texture about 40 inches down | silty clay 55 percent, silty clay loam 39 percent and loam 6 percent |
| Engineering class about 40 inches down | fat clay (CH) 55 percent and lean clay (CL) 45 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 100 percent of the area |
| High corrosion risk for uncoated steel | 55 percent of the area |
The USDA survey does not map bedrock within 60 inches of the surface in Impact, which does not rule out rock deeper down. It also maps no seasonal water table within 60 inches, but flood prone soils cover the mapped area, a concern for pits near Elm Creek. High steel corrosion risk is mapped across 55 percent, so casing and tracer wire material need the line owner’s review. The geologic map includes Holocene alluvium along streams and Early Permian sedimentary rock; variable stream deposits can make conditions change along a route.
How do we approach directional boring in Impact’s silty clay ground?
In Impact’s silty clay loam, we control fluid and reaming so sticky cuttings do not build up on the tool or grip the pipe. The mapped flood prone ground near Elm Creek also shapes pit placement.
- Mangum silty clay can stick to the reamer, so we use a thinner fluid mix and polymer, then open the hole in stages before pulling pipe.
- Where heavy clay lies along an Impact Drive route, we watch fluid returns and keep pressure controlled to avoid lifting nearby pavement.
- Flood prone soils cover mapped ground in Impact, so near Elm Creek we plan pits and bore depth around the channel and check crossing jurisdiction.
- For marked utilities along Clinton Street, we hydrovac pothole before drilling near them, then track the head from the surface and log depth and pitch.

What is in the way of a new line in Impact near US 83?
US 83 and US 277 are each 0.3 miles from Impact’s limits, and Interstate 20 is 0.5 miles away, so a route reaching those corridors may need a highway crossing plan. No highway is mapped inside town. Within Impact, Impact Drive runs 0.44 miles, while Kirkwood Court and Clinton Street each run 0.17 miles. Birchwood Street, Victoria Street and Roosevelt Street are also mapped. A bore can carry a line beneath a street without opening the pavement, with entry and exit pits placed off the travel surface where access allows.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 83 | Highway nearby | 0.3 miles outside | State highway office |
| US 277 | Highway nearby | 0.3 miles outside | State highway office |
| Interstate 20 | Highway nearby | 0.5 miles outside | State highway office |
| Southern Switching Company | Railroad nearby | 0.7 miles outside | The railroad |
| Elm Creek | Stream | 0.24 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Cat Claw Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Impact, but Southern Switching Company’s track is 0.7 miles from the town limits; a route that reaches it needs the railroad’s crossing agreement. Public records map no street and rail crossings in town. Elm Creek runs 0.24 channel miles through Impact, with no mapped street crossings of named streams. A creek route still needs a planned depth and a check for U.S. Army Corps of Engineers jurisdiction.
Who approves a bore near Southern Switching Company in Impact?
Impact’s city streets are under the city’s authority, while a bore approaching US 83, US 277 or Interstate 20 in the TxDOT Abilene District needs the utility owner’s TxDOT right of way permit. At highway crossings, electric and communication lines need 60 inches of cover, and water lines need 60 inches; the permit can set another depth. The utility owner submits through RULIS, and we prepare the bore plan and profile for that filing. If the route reaches Southern Switching Company’s track, its agreement governs the railroad crossing. For Elm Creek, planning includes checking Corps jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines in Taylor County near Impact?
The water provider for a specific Impact address must be confirmed with the city, Taylor County or the local water district before we plan a bore. EPA drinking water records for Texas do not tie systems to towns, and no system could be matched to Impact. AEP Texas North and Taylor Electric Cooperative report service in Taylor County, but that does not identify the electric line owner at each address. We confirm the owner before planning conduit near Impact Drive.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas North and Taylor Electric Cooperative | Electric utilities reporting service in Taylor County | EIA Form 861 | Confirm the line owner by address |
Housing figures are not published for a place as small as Impact, so the age of buried lines along Kirkwood Court cannot be assumed from townwide housing data. A short street network can still include service runs and existing utilities, and May averages 3.3 inches of rain in Taylor County compared with January’s 1.1 inches. Before drilling near Elm Creek, we hydrovac pothole marked lines on the bore path; locate paint shows position, not depth. That check matters for a water line or electric conduit.

How far is Impact from Abilene and our Yukon office?
Impact is in Taylor County, 3.2 miles north of Abilene, the county seat and nearest larger city. The town covers 0.09 square miles at an elevation of 1,664 feet, and its ZIP code is 79603. Tye is 7.7 miles southwest, Hawley is 8.2 miles northwest, and Potosi is 11.9 miles south. From our Yukon yard, the drive to Impact is 291 road miles and 5.7 hours. That distance is part of planning crew and equipment mobilization for a job near Elm Creek or Impact Drive.
Places near Impact
- Directional boring in Abilene: 3.2 miles south
- Directional boring in Tye: 7.7 miles southwest
- Directional boring in Hawley: 8.2 miles northwest
- Directional boring in Potosi: 11.9 miles south
- Directional boring in Merkel: 15.6 miles west
What kinds of bores may come up near Kirkwood Court in Impact?
- Water service: A service route from Impact Drive toward a home needs the address, pipe size and existing utility locations before we set its bore path.
- Fiber conduit: A conduit run along Kirkwood Court can pass beneath the street surface, with potholes locating marked lines before the drill approaches.
- Highway crossing: A route toward US 83 needs a bore plan that accounts for TxDOT cover, right of way and the travel lanes.
- Creek crossing: A line near Elm Creek needs planned depth beneath the channel and a check for Corps jurisdiction during planning.
- Rail crossing: A route reaching Southern Switching Company’s track needs the railroad’s agreement and its crossing conditions before work is laid out.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore on Impact Drive in Impact?
For an Impact Drive quote, send the address or map pin first, then tell us what goes underground, such as water or fiber. Add the pipe or conduit size and estimated footage. A sketch or plans showing the route toward Clinton Street, Elm Creek or a nearby highway help us see access and crossings.
The price reflects the actual route, not just its length. Mangum silty clay can affect drilling and reaming; a crossing toward US 83 or Southern Switching Company adds planning and exposure work. We also account for pipe size, utilities to pothole, pavement or concrete, creek access, pits, excavator time and sand backfill. Mobilization matters because Impact is 291 road miles from Yukon. High profile or emergency work can change the crew and equipment plan.
Questions people ask about boring in Impact
Does Trinity take directional boring work in Taylor County near Impact, and how is it staffed?
Yes. We take directional boring work in Impact and staff it with our own crews or crews working from satellite yards run by partner drilling contractors we have vetted. The town is in Taylor County, and you work with Trinity from the first call through the bore log, regardless of which crew is on site.
Who owns electric lines in Taylor County near Impact, and who confirms conduit specs?
AEP Texas North and Taylor Electric Cooperative report electric service in Taylor County, but neither can be assumed to own a line at every Impact address. We confirm the specific line owner and conduit requirements before planning a bore along Impact Drive or another route.
Does the city control Clinton Street in Impact, and can a bore avoid cutting it?
Impact is incorporated, so its streets, including Clinton Street, belong to the city. Directional boring can carry a line under the street without an open cut when the site allows suitable pits on either side. We check marked utilities before the drill approaches the crossing.
How old are homes and buried lines near Kirkwood Court in Impact?
Townwide housing age figures are not published for Impact, so the age of homes or buried lines along Kirkwood Court cannot be established from those data. For a replacement bore, we locate and expose marked utilities first, then plan the new alignment around verified lines and the proposed connection.
Are groundwater or flood prone soils a concern for bore pits near Elm Creek in Impact?
Flood prone soils cover the mapped area of Impact, including ground to consider near Elm Creek. The USDA survey does not map a seasonal water table within 60 inches, but that does not remove the need to plan pits for wet conditions. Creek crossings also get checked for Corps jurisdiction.
Can Mangum soil in Impact corrode steel, and what pipe should a bore use?
The USDA survey maps high steel corrosion risk across 55 percent of Impact, including areas mapped as Mangum soil. That matters when selecting steel casing or tracer wire. The line owner chooses appropriate materials or coatings for the job; HDPE does not have the same soil corrosion concern.
How much Texas811 notice does an Impact Drive bore need, and what if marks move?
For a bore along Impact Drive, Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice, request a new ticket. For work in Impact, we refresh worn or moved marks through Texas811 before continuing.
How far is Impact from Abilene and Trinity’s Yukon office, and does it affect a job?
Impact is 3.2 miles north of Abilene and 291 road miles from our Yukon, Oklahoma main office, a 5.7 hour drive. That distance can affect mobilization for work on Impact Drive or near Elm Creek, alongside the bore length, access and equipment needed.
What affects the cost of directional boring near US 83 in Impact?
The route and scope determine the price for a bore near US 83. Factors include footage, pipe size, Mangum silty clay, marked utilities to expose, pavement, creek or drainage crossings, pits and equipment time. A crossing subject to TxDOT review and the 291 road miles from Yukon can also affect planning and mobilization.
Where the Impact facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Impact
- U.S. Census Bureau, TIGER/Line 2024: Impact boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Impact
- U.S. Census Bureau, American Community Survey 2019 to 2023: Impact housing units and year built
- Macrostrat geologic map compilation: map units under Impact
- U.S. Department of Transportation, North American Rail Network: track owners in Taylor County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Taylor County
- U.S. Geological Survey, Elevation Point Query Service: Impact elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Impact
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Impact
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Impact, Texas
Type the address of your job in Impact. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Impact
Same county: Tuscola · Buffalo Gap · Lawn · Trent. All counties: Texas county list.
