Shady Hollow Texas Directional Boring: Speck Clay Loam, Edwards Limestone And Slaughter Creek
Quick Answer: The USDA soil survey maps Speck clay loam across 87 percent of Shady Hollow, with bedrock mapped at about 40 inches below the surface. We take directional boring, also called horizontal directional drilling (HDD), work in Shady Hollow, including routes that pass beneath Slaughter Creek. The Yukon, Oklahoma main office is 412 road miles away, so a Brodie Lane job needs mobilization planning. Shallow, hard Edwards limestone can call for rock drilling rather than a dirt bit.
Shady Hollow bores at a glance
- Unincorporated community in Travis County, Texas. Population 4,822 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 412 miles, about 8 hours of driving.
- Ground: Speck soil is mapped on 87 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 94 percent of the area.
- No state or US highway is mapped inside the boundary. Closest: Texas State Highway 45 and Loop 1.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Slaughter Creek and Bear Creek.
- Public water: Shady Hollow Municipal Utility District, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Shady Hollow near Slaughter Creek?
Trinity Boring Solutions takes directional boring work in Shady Hollow, an unincorporated community in Travis County. The 2020 Census counted 4,822 residents; the Census Bureau does not publish yearly estimates for unincorporated places. Along Brodie Lane or Lost Oasis Hollow, our crews install water, sewer, gas, electric conduit and fiber where routes need to reach homes or connect services without opening the whole street.
Our main office is in Yukon, Oklahoma, and Shady Hollow work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. With no utility strike in over 25 years, we bring that record to planning near the Shady Hollow Municipal Utility District and electric lines reported in Travis County. Our family business started in 1965, and directional boring has been part of our work since 1982; that experience informs plans for routes such as one along Brodie Lane.

What ground should a Shady Hollow bore expect in Speck soil?
The USDA soil survey maps Speck clay loam across 87 percent of Shady Hollow, so much of a route may start in clay loam rather than loose sand. About 40 inches below the surface, bedrock is mapped across 94 percent of the area, while stratified very gravelly coarse sand to very gravelly sand accounts for 5 percent. Clay loam can hold an open hole but may stick to the reamer and grip pipe. The mapped texture is a planning guide, not a test boring along Brodie Lane or another proposed route.
| USDA soil survey, inside the Shady Hollow mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Speck 87 percent, Alluvial land (miscellaneous area) 5 percent and Crawford 4 percent |
| Texture at the surface | clay loam 87 percent, clay 6 percent and stratified very gravelly coarse sand to very gravelly sand 5 percent |
| Texture about 40 inches down | bedrock 94 percent and stratified very gravelly coarse sand to very gravelly sand 5 percent |
| Engineering class about 40 inches down | silty gravel (GM) 6 percent |
| Average clay content about 40 inches down | 8 percent |
| Bedrock mapped within 60 inches | 94 percent of the area (94 percent hard rock, 0 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 95 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 94 percent of Shady Hollow, with a typical depth of 18 inches. That hard rock can slow a bore and may call for a rock bit. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 5 percent, so a Slaughter Creek route still needs channel planning. High steel corrosion risk is mapped across 95 percent; the line owner should consider casing and tracer wire materials. The mapped unit is Edwards limestone, an Early Cretaceous formation.
How do we drill Shady Hollow where bedrock is mapped?
For a Shady Hollow bore, the Speck clay loam and shallow Edwards limestone shape the tooling and reaming plan. We track the drill head from the surface and log depth and pitch as the route advances.
- Speck clay loam can cling to a reamer and tighten around pipe, so we use controlled fluid, ream in stages and have the line ready for pullback.
- Where the Shady Hollow soil survey maps Edwards limestone near the surface, we plan for slower rock drilling and watch the soil to rock transition for steering changes.
- For a proposed Slaughter Creek route, we plan depth below the channel and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
- Along Brodie Lane, we hydrovac expose each marked utility on the bore path before drilling close, then track the head and log its depth and pitch.

Which roads or creeks might a Shady Hollow bore cross near Lost Oasis Hollow?
No highway is mapped inside the Shady Hollow community boundary, but Texas State Highway 45 is 0.1 miles outside it and Loop 1 is 0.6 miles outside. A route that reaches either road needs its right of way considered in the bore plan. Lost Oasis Hollow is the longest named street inside the community at 1.75 miles, followed by Brodie Lane at 1.69 miles and Edwards Hollow Run at 0.97 miles. A bore can pass beneath pavement instead of cutting across these streets.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 45 | Highway nearby | 0.1 miles outside | State highway office |
| Loop 1 | Highway nearby | 0.6 miles outside | State highway office |
| Slaughter Creek | Stream | 1.89 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bear Creek | Stream | 0.48 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Little Bear Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Shady Hollow or within 1 mile outside the community boundary, and no street and rail crossing is mapped. Slaughter Creek runs 1.89 channel miles inside the community, and Bear Creek runs 0.48 miles. Four street crossings of named streams are mapped, so a proposed route needs creek conditions checked rather than assuming a clear path. For work near Slaughter Creek and Bear Creek, we plan around the fact that no lakes or ponds are mapped within 1 mile.
Whose permission does a Shady Hollow bore need in Travis County?
Shady Hollow has no city government, so local streets such as Edwards Hollow Run fall under county authority, while Texas State Highway 45 belongs to the state. Work in the highway right of way needs a TxDOT utility permit reviewed by the TxDOT Austin District. The utility owner files in TxDOT’s online RULIS system; we prepare the bore plan and profile and work under that owner’s permit. For work near Texas State Highway 45, we follow TxDOT’s requirement to bore or tunnel beneath existing highway pavement. A Slaughter Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns lines near Shady Hollow Municipal Utility District?
The Shady Hollow Municipal Utility District owns the public water system, which uses purchased surface water and reports 1,426 service connections serving 4,269 people. Electric service reported in Travis County includes Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. Those reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near Lost Oasis Hollow. We hydrovac pothole marked water and electric lines on the route before drilling near them.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Shady Hollow Municipal Utility District | Public water system | Surface water bought from another system | 1,426 connections, 4,269 people served |
| Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Travis County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put Shady Hollow’s median housing year at 1987; 84 percent of homes date from 1960 to 1999, and 16 percent from 2000 or later. Those ages can help frame whether a Brodie Lane project is replacing an existing service or adding a new one, but they do not establish buried line age. We expose marked utilities before drilling near them because locate paint shows position, not depth.

Where is Shady Hollow in relation to Manchaca?
Shady Hollow is in Travis County, with an elevation of 759 feet and a mapped community area of 2.17 square miles. We use Shady Hollow’s ZIP codes, 78739 and 78748, to identify underground work locations in Travis County. Manchaca lies 2.6 miles southeast; San Leanna is 3.0 miles southeast, and Bear Creek is 4.8 miles west. Buda, the nearest larger city, is 5.8 miles south, while Austin, the county seat, is 11.3 miles northeast. The Yukon, Oklahoma main office is 412 road miles away, an 8.0 hour drive.
Places near Shady Hollow
- Directional boring in Manchaca: 2.6 miles southeast
- San Leanna: 3 miles southeast
- Directional boring in Hays: 3 miles south
- Directional boring in Bear Creek: 4.8 miles west
- Directional boring in Sunset Valley: 5.1 miles northeast
- Directional boring in Buda: 5.8 miles south
What boring work comes up on Shady Hollow streets like Edwards Hollow Run?
- Highway crossing: A route near Texas State Highway 45 needs a bore plan suited to the highway right of way and its pavement.
- Water service: A service near Lost Oasis Hollow can connect to the Shady Hollow Municipal Utility District system after the route and existing lines are checked.
- Fiber conduit: A fiber bore along Brodie Lane can carry conduit beneath street pavement instead of opening a trench across the route.
- Creek crossing: A Slaughter Creek bore needs a channel profile and review for U.S. Army Corps of Engineers jurisdiction.
- Electric conduit: Near Edwards Hollow Run, the electric line owner needs confirmation before conduit size and route are set.
- Sewer bore: A sewer route near Wyldwood Road needs its pipe size, footage and nearby utility crossings shown in the plan.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Shady Hollow bore near Wyldwood Road?
For a Wyldwood Road request, start with the address or map pin, then tell us what will go in the ground. Include pipe or conduit size and estimated footage; a sketch or plans showing the route toward Lost Oasis Hollow help us understand the layout. Those details let us review the route and the likely crossings before preparing the job scope.
In Shady Hollow, ground and crossing conditions lead the price review: Speck clay loam over shallow Edwards limestone can change tooling and drilling time. We also consider bore length, pipe or conduit size, marked utilities that need exposure, and pavement or concrete along streets such as Brodie Lane. A Slaughter Creek crossing can add planning, pits or excavator time. Work near Texas State Highway 45 brings permit planning, and the 412 road miles from Yukon affect mobilization.
Questions people ask about boring in Shady Hollow
Does Trinity take directional boring jobs in Shady Hollow, Travis County, and how are crews assigned?
Yes, Trinity Boring Solutions takes directional boring work in Shady Hollow. We manage the job from the first call through the bore log, using our own crews or satellite yards operated by drilling contractors we have vetted. That staffing model applies to a planned route near Slaughter Creek as well as other Travis County work.
Who runs Shady Hollow’s public water system by Slaughter Creek, and where is its source?
The Shady Hollow Municipal Utility District runs the public water system, and its source is purchased surface water. In Travis County, we factor public records listing 1,426 service connections and 4,269 people served into underground work planning. Before a bore near Brodie Lane, the proposed water route and marked existing lines still need to be checked.
Which electric companies report service in Shady Hollow, Travis County, and who confirms conduit specs?
Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative report electric service in Travis County. Those records do not identify the provider at each Shady Hollow address. We confirm the line owner before setting conduit specifications for a route near Edwards Hollow Run.
Who is responsible for Shady Hollow streets like Edwards Hollow Run, and must a bore cut the road?
Shady Hollow is unincorporated and has no city government, so county streets such as Edwards Hollow Run fall under county authority. Directional boring can pass beneath pavement without cutting across the street. Texas State Highway 45 is state owned, so its right of way follows TxDOT’s permit process.
What do Shady Hollow home ages near Brodie Lane suggest about replacement bores?
The median housing year is 1987, and American Community Survey 2019 to 2023 estimates place 84 percent of homes from 1960 to 1999. That may mean a Brodie Lane project involves replacing an existing service, but home age does not prove the age of buried lines. Along Brodie Lane, we expose marked utilities before drilling so our bore path can avoid them.
Does Speck soil in Shady Hollow corrode steel, and what pipe should a bore use?
The USDA soil survey maps high steel corrosion risk across 95 percent of Shady Hollow. That makes casing and tracer wire material a consideration for the line owner. HDPE is not affected by soil corrosion, while the owner chooses materials for a route through Speck clay loam.
How much notice does Texas811 need for a Shady Hollow bore along Lost Oasis Hollow?
For a Lost Oasis Hollow bore, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If work near Lost Oasis Hollow slips more than 14 days past the original notice, we submit a new request. Before we continue work near Bear Creek, we refresh worn or moved marks through Texas811.
How far is Shady Hollow from the Yukon office, and does Buda affect mobilization?
Shady Hollow is 412 road miles and an 8.0 hour drive from the Yukon, Oklahoma main office. Buda is 5.8 miles south of Shady Hollow, but mobilization for the job is based on the route from Yukon. The distance is part of planning a bore near Brodie Lane or Texas State Highway 45.
What affects the cost of a Shady Hollow bore near Texas State Highway 45?
The job scope sets the price: Speck clay loam and shallow Edwards limestone can affect drilling time and tooling, while bore length and conduit size shape the work. Marked utilities, pavement, pits and creek crossings also matter. A route near Texas State Highway 45 adds right of way permit planning, and distance from Yukon affects mobilization.
Where the Shady Hollow facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Shady Hollow
- U.S. Census Bureau, TIGER/Line 2024: Shady Hollow boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Shady Hollow population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Shady Hollow housing units and year built
- Macrostrat geologic map compilation: map units under Shady Hollow
- U.S. EPA Safe Drinking Water Information System: public water systems serving Shady Hollow
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Travis County
- U.S. Geological Survey, Elevation Point Query Service: Shady Hollow elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Shady Hollow
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Shady Hollow
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Shady Hollow, Texas
Type the address of your job in Shady Hollow. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Shady Hollow
Same county: Austin · Pflugerville · Manor · Lakeway · Leander · Wells Branch · Lago Vista · Bee Cave · Hornsby Bend · Cedar Park · West Lake Hills · Barton Creek. All counties: Texas county list.
