Bear Creek Texas Directional Boring: Brackett Soil, Glen Rose Limestone and RM 1826
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), for Bear Creek routes that need to pass beneath RM 1826. The 416 road miles from our Yukon, Oklahoma main office make a bore along Madrone Trail a planned mobilization. Brackett soil and shallow mapped bedrock shape the drilling plan, so the ground may call for staged reaming and rock capable tooling. Bear Creek Drive and the other local streets give each route its own utility and access conditions.
Bear Creek bores at a glance
- Incorporated city in Hays County, Texas. Population 461 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 416 miles, about 8 hours of driving.
- Ground: Brackett soil is mapped on 91 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 91 percent of the area.
- Highways inside the boundary: RM 1826. State permit office: TxDOT Austin District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring on Madrone Trail in Bear Creek?
Bear Creek is in Hays County, where the Census Bureau Vintage 2024 estimate puts the population at 461. Along Madrone Trail or Bear Creek Drive, our crews can bore water, sewer, gas, electric conduit or fiber beneath the route. The line type, size and existing utilities shape the bore plan. Trinity Boring Solutions takes directional boring work in Texas, including Bear Creek.
Our main office is in Yukon, Oklahoma, and Bear Creek work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa, Oklahoma. A Madrone Trail service is a shorter job beside that reach, planned around Brackett ground and the marked lines along its route. Our family business began in 1965, and we have done directional boring since 1982, with Bear Creek 416 road miles from our Yukon main office.

How does Brackett soil affect a bore in Bear Creek?
The USDA soil survey maps Brackett series across 91 percent of Bear Creek. The main map unit is Brackett Rock outcrop Comfort complex, 1 to 8 percent slopes, covering 88 percent of the mapped area. At about 40 inches below the surface, bedrock is the mapped texture across 91 percent; silty clay is mapped across 5 percent. Average clay content at that depth is 41 percent, and no sandy area is mapped there. These are mapped soil patterns, not test borings, so the exact route still needs site planning.
| USDA soil survey, inside the Bear Creek city limits | What is mapped |
|---|---|
| Soil series mapped | Brackett 91 percent and Lewisville 5 percent |
| Texture at the surface | paragravelly clay loam 88 percent, silty clay 5 percent and gravelly clay loam 3 percent |
| Texture about 40 inches down | bedrock 91 percent and silty clay 5 percent |
| Engineering class about 40 inches down | fat clay (CH) 7 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | 91 percent of the area (1 percent hard rock, 91 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 7 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 91 percent of Bear Creek, typically at 14 inches; most of that mapped bedrock is weathered, while hard bedrock is mapped across 1 percent. Expect the soil to change quickly into rock, which can deflect the drill head at the contact. Seasonal water tables and flood prone soils are not mapped in the top 60 inches. For boring plans in Bear Creek, we keep the mapped high steel corrosion risk across 7 percent in view alongside Brackett soil series. The geologic map includes Cenozoic cherty calcareous clay solution residuum and Albian Glen Rose Limestone, both relevant to planning the tool and casing.
How is a bore run through Bear Creek bedrock?
On a Bear Creek route, we first match the tool and fluid plan to the Brackett soil and the shallow bedrock mapped nearby. A walkover locator tracks the drill head as the bore advances.
- We check the Brackett soil map and proposed route first, then select tooling for the shallow bedrock mapped across much of Bear Creek.
- Before the drill approaches a marked line on Madrone Trail, we hydrovac pothole it to confirm its depth; surface paint alone does not show depth.
- In clay near Bear Creek Drive, we manage drilling fluid and ream in stages so sticky ground does not load the tool or grip the pipe.
- A walkover locator follows the bore near RM 1826, recording depth and pitch as the head advances through changing soil and bedrock.

Which roads and creeks can a bore cross in Bear Creek?
RM 1826 is the state highway mapped inside Bear Creek, with 0.8 roadway miles in town. Texas State Highway 45 is 0.7 miles beyond the town limits, so a route approaching it needs its own right of way review. Madrone Trail is the longest named street at 2.99 miles, followed by Bear Creek Drive at 1.27 miles and Cedar Cove at 0.18 miles. The named streets help define access and possible bore paths, but each address needs a route check before equipment is set.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| RM 1826 | State highway | 0.8 roadway miles inside | State highway office |
| Texas State Highway 45 | Highway nearby | 0.7 miles outside | State highway office |
| Bear Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Bear Creek or within one mile outside its limits, so there is no mapped track route to plan around. The named stream Bear Creek is 0.3 miles outside town, and no mapped street crossing of a named stream lies inside the limits. Although Bear Creek is a nearby stream, no lakes or ponds are mapped within one mile, so we plan around the creek setting. If a proposed route reaches Bear Creek, we plan the crossing and check for U.S. Army Corps of Engineers jurisdiction before work is laid out.
Who approves a bore on RM 1826 in Hays County in Bear Creek?
Bear Creek streets such as Madrone Trail belong to the incorporated town, while a bore in the RM 1826 right of way needs a TxDOT utility permit. The TxDOT Austin District reviews Hays County work. The utility that owns the line submits the application through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. For a crossing under RM 1826, we follow TxDOT rules calling for boring or tunneling beneath existing highway pavement. If a route reaches Bear Creek stream, we check for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities should be checked in Hays County near Bear Creek?
The water provider for a specific Bear Creek address has to be confirmed with the city, the county or the local water district before a bore is planned. Electric utilities reporting service in Hays County are City of San Marcos, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. That county list does not establish which provider serves a Madrone Trail address. We confirm the line owner before planning an electric conduit bore, then lay out potholes where the route crosses marked utilities.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of San Marcos, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Hays County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates place Bear Creek’s median housing year at 1992, useful context as we scope underground work. The estimates show 67 percent of homes built from 1960 to 1999 and 33 percent built in 2000 or later. That mix can mean a replacement line along Bear Creek Drive or a newer service near Cedar Cove, and the actual buried lines must be located either way. Paint shows a marked line’s position, not its depth, so we hydrovac pothole marked utilities before drilling near them.

What places near Belterra does Bear Creek boring serve?
Bear Creek is an incorporated town in Hays County, at elevation 969 feet, with 1.14 square miles of land and ZIP code 78737. Belterra is 2.7 miles west and is the nearest larger place. Shady Hollow is 4.8 miles east, Hays is 5.8 miles southeast, Driftwood is 6.7 miles southwest and Manchaca is 7.0 miles southeast. San Marcos, the county seat, is 21.3 miles south. From our Yukon yard, Bear Creek is 416 road miles and an 8.0 hour drive, which figures into mobilization for work on RM 1826 or Madrone Trail.
Places near Bear Creek
- Directional boring in Belterra: 2.7 miles west
- Directional boring in Shady Hollow: 4.8 miles east
- Directional boring in Hays: 5.8 miles southeast
- Directional boring in Driftwood: 6.7 miles southwest
- Directional boring in Manchaca: 7 miles southeast
What kinds of bores come up near Cedar Cove in Bear Creek?
- Highway crossing: A route beneath RM 1826 needs a bore plan for the state highway right of way and its pavement.
- Water service: A connection along Madrone Trail starts with confirming the water provider for that specific Bear Creek address.
- Fiber drop: A fiber route along Bear Creek Drive can be bored beneath pavement, with marked utilities exposed before drilling near them.
- Creek crossing: A proposed route near Bear Creek stream needs a channel plan and a check for U.S. Army Corps of Engineers jurisdiction.
- Electric conduit: Along Cedar Cove, we confirm the line owner before planning conduit and pothole marked utilities on the proposed route.
- Replacement line: A route serving homes near Madrone Circle can be planned after locating existing lines and checking the mapped Brackett ground.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a bore near RM 1826 in Bear Creek?
Send the address or map pin first; a location on RM 1826 needs a different route review than one along Madrone Trail. When we plan a bore along Madrone Trail in Bear Creek, we need to know what will go underground, the pipe or conduit size, and footage. A sketch or plans help us see nearby utilities, access and any pavement or creek concern before we set the scope.
Price follows the route and the work it takes. The 416 road miles from Yukon affect mobilization, while Brackett soil and bedrock can change tooling and drilling time. We also consider bore length, pipe or conduit size, utilities crossed and exposed, pavement, pits, excavator time and sand backfill. A route near RM 1826 may need highway permit planning, and a proposed Bear Creek stream crossing adds planning steps. High profile or emergency work can also change the requirements.
Questions people ask about boring in Bear Creek
Does Trinity take directional boring jobs in Bear Creek, Hays County, and how are crews assigned?
Yes. Trinity takes directional boring work in Bear Creek, and the job is handled through our team rather than a local office. Our own crews do the work, with support from satellite yards run by partner drilling contractors we have vetted. You work with Trinity from the initial call through the bore log, whether the route is on Madrone Trail or elsewhere in Hays County.
Do homes and buried lines along Bear Creek Drive need replacement bores?
The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1992, with 67 percent built from 1960 to 1999 and 33 percent in 2000 or later. Those figures do not date each buried line. For a replacement along Bear Creek Drive, we locate and expose marked utilities before the drill approaches them.
What is Brackett soil like for a bore in Bear Creek?
The USDA soil survey maps Brackett series across 91 percent of Bear Creek. At about 40 inches, bedrock is the mapped texture across 91 percent, while silty clay accounts for 5 percent. Average clay content at that depth is 41 percent. Those mapped patterns suggest the ground can shift from sticky clay to rock, so the route and tooling need review.
Is rock mapped within five feet of the surface in Bear Creek?
Yes. The USDA soil survey maps bedrock within 60 inches across 91 percent of Bear Creek, with typical depth listed as 14 inches. Weathered bedrock is mapped across 91 percent, while hard bedrock is mapped across 1 percent. Those are survey patterns, not a site specific drilling log, so the exact conditions along a Madrone Trail route still need checking.
Who approves a bore under RM 1826 in Bear Creek?
A bore in the RM 1826 right of way needs a TxDOT utility permit, reviewed by the TxDOT Austin District for Hays County. The utility owner files through the online RULIS system. We prepare the bore plan and profile for that application and work under the permit issued to the owner. For a crossing under RM 1826, we follow TxDOT rules calling for boring or tunneling beneath existing highway pavement.
Can a line be bored beneath Bear Creek stream near Bear Creek?
A bore can be planned for a stream crossing, but the route and site conditions need review first. Bear Creek stream is mapped 0.3 miles outside the town limits, and no street crossing of a named stream is mapped inside town. During planning, we check whether the proposed crossing is under U.S. Army Corps of Engineers jurisdiction.
Does being 2.7 miles from Belterra change a Bear Creek boring job?
The distance from Belterra does not set the drilling method, but mobilization matters because Bear Creek is 416 road miles from our Yukon, Oklahoma main office. A job on Madrone Trail or RM 1826 is scoped around its route, ground and crossings, along with the travel needed to bring equipment and crews to the site.
How much Texas811 notice is needed for a bore on Madrone Trail in Bear Creek?
For work on Madrone Trail, Texas law requires a locate request at least 48 hours before excavation, not counting Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. In Hays County, we follow Texas811 guidance that describes the notice period as at least two working days before digging. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of directional boring near RM 1826 in Bear Creek?
The route and scope determine the price, not one detail alone. Distance from Yukon, bore length, pipe size, Brackett soil and shallow bedrock all matter. We also consider marked utilities to expose, pavement, pits, excavator time and backfill. Work near RM 1826 can add highway permit planning, and a proposed Bear Creek stream crossing changes the scope as well.
Where the Bear Creek facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Bear Creek
- U.S. Census Bureau, TIGER/Line 2024: Bear Creek boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Bear Creek
- U.S. Census Bureau, American Community Survey 2019 to 2023: Bear Creek housing units and year built
- Macrostrat geologic map compilation: map units under Bear Creek
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hays County
- U.S. Geological Survey, Elevation Point Query Service: Bear Creek elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Bear Creek
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Bear Creek
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Bear Creek, Texas
Type the address of your job in Bear Creek. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Bear Creek
Same county: San Marcos · Kyle · Buda · Dripping Springs · Wimberley · Woodcreek · Uhland · Austin · Mountain City · Niederwald · Creedmoor. All counties: Texas county list.
