Tye Texas Directional Boring: Rowena Clay Loam, Interstate 20 and Indian Creek
Quick Answer: Along Interstate 20, Trinity Boring Solutions takes directional boring and horizontal directional drilling (HDD) work in Tye, Texas, for utility routes that need to pass beneath the corridor. Tye is 299 road miles from our Yukon, Oklahoma main office, with US 84 also running through town. Rowena clay loam is widely mapped here, and sticky clay can ball up on a reamer or grip pipe. Indian Creek and the Union Pacific track add crossing details to check when laying out a route.
Tye bores at a glance
- Incorporated city in Taylor County, Texas. Population 1,241 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 299 miles, about 5.9 hours of driving.
- Ground: Rowena soil is mapped on 38 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 14 percent of the area.
- Highways inside the boundary: Interstate 20, US 84 and FM 707. State permit office: TxDOT Abilene District.
- Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
- Named streams inside the boundary: Indian Creek.
- Public water: City of Tye, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring on North Street in Tye?
Trinity Boring Solutions takes directional boring work in Tye, Taylor County, where Interstate 20 is a major route to cross. Interstate 20 can put a highway crossing into the line path before a service reaches a property. The Census Bureau Vintage 2024 estimate puts Tye at 1,241 people. For a route along North Street, we install water, sewer, gas, electric conduit and fiber lines to serve the planned connection.
Our main office is in Yukon, Oklahoma, and Tye work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, our directional boring work has built four decades of experience with ground like Tye’s mapped Rowena clay loam. Our family business began in 1965, and that long drilling history helps us plan for clay that can cling to tooling and pipe.

What kind of ground does Tye have around Rowena soil?
The USDA soil survey maps Rowena across 38% of Tye and Sagerton across 27%, with Tillman mapped across 12%. Rowena clay loam, dry, 0 to 1 percent slopes covers 25% of the mapped area. About 40 inches down, the survey maps clay in 56% of the area and clay loam in 35%; average clay content at that depth is 39%. No sandy acreage is mapped at that depth, so a bore plan should account for cohesive, sticky soil rather than sand that caves behind the bit.
| USDA soil survey, inside the Tye city limits | What is mapped |
|---|---|
| Soil series mapped | Rowena 38 percent, Sagerton 27 percent, Tillman 12 percent, Vernon 7 percent and Clairemont 3 percent |
| Texture at the surface | clay loam 80 percent, clay 10 percent and silty clay loam 5 percent |
| Texture about 40 inches down | clay 56 percent, clay loam 35 percent and silty clay loam 3 percent |
| Engineering class about 40 inches down | lean clay (CL) 52 percent and fat clay (CH) 46 percent |
| Average clay content about 40 inches down | 39 percent |
| Bedrock mapped within 60 inches | 14 percent of the area (0 percent hard rock, 14 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 7 percent of the area |
| High corrosion risk for uncoated steel | 64 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 14% of Tye, with a typical mapped depth of 34 inches; that bedrock is weathered, and hard bedrock is not mapped in that interval. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 7%, so Indian Creek still deserves a depth check. High steel corrosion risk is mapped across 64%, making casing and tracer wire material a line owner decision. The map also shows Quaternary deposit, undivided, of Cenozoic age, and Early Permian sedimentary rock; weathered contacts can slow drilling.
How do we bore Tye clay without losing control of the line?
For a Tye route through Rowena clay loam, we manage the sticky cuttings with a measured fluid plan and staged reaming, then keep the drill path under observation.
- Rowena clay can stick to the reamer, so we use a thinner fluid with polymer and open the hole in stages before pulling pipe the same day.
- With heavy clay mapped across Tye, we watch fluid returns closely near pavement so pressure does not lift the surface.
- Before the drill approaches a marked line near North Street, we hydrovac pothole it; paint shows where the utility runs, not its depth.
- At Indian Creek, we plan the bore depth beneath the channel and check the crossing for possible Corps jurisdiction during planning.

Where might a Tye line pass under Union Pacific or a road?
Interstate 20, US 84 and FM 707 run inside Tye, so a route may need a highway crossing as well as a property connection. US 80 and Interstate 20 Business touch or run along the city limits. North Street is the longest named street at 1.83 miles, followed by Scott Street at 1.76 miles and Market Street at 1.4 miles. TxDOT rules call for boring or tunneling beneath existing highway pavement, which lets a planned line pass below the roadway instead of cutting across it.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 20 | Interstate | 3.1 roadway miles inside | State highway office |
| US 84 | US highway | 3.3 roadway miles inside | State highway office |
| FM 707 | State highway | 4.4 roadway miles inside | State highway office |
| US 80 | Highway nearby | Runs along or touches the city limits | State highway office |
| Interstate 20 Business | Highway nearby | Runs along or touches the city limits | State highway office |
| Union Pacific | Railroad | 3.15 track miles inside | The railroad |
| Indian Creek | Stream | 2.91 channel miles inside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 3.15 track miles inside Tye on its Baird Subdivision, and public mapping shows 3 street and rail crossings. A route beneath the track needs an agreement from Union Pacific that sets crossing details such as casing, depth and flagging. Indian Creek runs 2.91 channel miles in town, with 2 mapped street crossings. No lakes or ponds are mapped within one mile; creek work still needs a check for possible Corps jurisdiction during planning.
Who approves a Tye bore in Taylor County?
Tye is incorporated, so city streets such as North Street belong to the city itself; no city permit office or local code is assumed here. For work in the right of way of Interstate 20, US 84 or FM 707, the utility owner, not the driller, submits a utility permit application through TxDOT’s RULIS system. The TxDOT Abilene District reviews it, and we give the line owner the bore plan and profile for its filing. TxDOT rules set cover requirements: electric and communication lines need 60 inches at highway crossings, water needs 60 inches, and pressurized sewer needs 60 inches. A Union Pacific track crossing also needs an agreement with the railroad that owns the track.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground near the City of Tye water system?
The City of Tye public water system uses purchased surface water and reports 643 service connections serving 1,176 people. A line near that system needs its actual owner and route confirmed before a water or conduit bore is planned. AEP Texas North and Taylor Electric Cooperative report electric service in Taylor County, but that does not identify the provider at every Tye address. Before planning an electric conduit bore in Tye, we confirm the line owner for the specific address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Tye | Public water system | Surface water bought from another system | 643 connections, 1,176 people served |
| AEP Texas North and Taylor Electric Cooperative | Electric utilities reporting service in Taylor County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put Tye’s median housing year at 1986: 24% of homes were built before 1960, 40% from 1960 to 1999, and 36% in 2000 or later. That mix can mean either replacement work near older North Street housing or new service routes elsewhere. Before the drill approaches a marked utility on a planned North Street bore, we hydrovac pothole it; surface paint shows position, not depth.

Do you cover Tye and nearby Abilene?
Tye is an incorporated city in Taylor County, 7.5 miles west of county seat Abilene, at an elevation of 1,811 feet. The city covers 4.8 square miles and has ZIP codes 79563, 79536 and 79603. Impact is 7.7 miles northeast, Merkel is 8.5 miles west, Hawley is 11.2 miles north, and Buffalo Gap is 11.8 miles south. Our Yukon, Oklahoma yard is 299 road miles away, a 5.9 hour drive, so mobilization is part of planning work along Interstate 20 or Indian Creek.
Places near Tye
- Directional boring in Abilene: 7.5 miles east
- Directional boring in Impact: 7.7 miles northeast
- Directional boring in Merkel: 8.5 miles west
- Directional boring in Hawley: 11.2 miles north
- Directional boring in Buffalo Gap: 11.8 miles south
What would we bore near Indian Creek in Tye?
- Highway crossing: A line beneath Interstate 20 is bored under the travel lanes, with the TxDOT permit path set by the utility owner.
- Water service: A service near the City of Tye system needs its line owner confirmed and its route checked against existing connections.
- Fiber route: A fiber bore along North Street can pass beneath pavement without cutting the street surface.
- Creek crossing: A route beneath Indian Creek needs depth planning for the channel and a jurisdiction check during planning.
- Rail crossing: A bore below the Union Pacific Baird Subdivision needs an agreement setting casing, depth and flagging.
- Electric conduit: Before a conduit route near FM 707 is laid out, we confirm which reported county utility owns the line at that address.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Tye bore near Interstate 20?
For a route near Interstate 20, start with the address or a map pin so we can place the work. Tell us what goes underground, such as water near the City of Tye system or fiber along North Street. Add the pipe or conduit size and the footage. A sketch or plans help show how the route meets Indian Creek, a road or the property connection.
A short, clear route away from Interstate 20, the Union Pacific track and Indian Creek is simpler to plan than one with several crossings. The Rowena clay loam affects tooling and fluid needs. Price also reflects length, pipe or conduit size, utilities to expose, concrete or pavement, creek or drainage crossings, pits, excavator time and sand backfill. Mobilization matters because Tye is 299 road miles from Yukon, and high profile or emergency work can add planning needs.
Questions people ask about boring in Tye
Does Trinity take directional boring jobs in Tye and Taylor County, and who staffs them?
Yes, we take directional boring jobs in Tye, Taylor County, and staff them with our own crews or crews from partner drilling contractors we have vetted. You work with Trinity through planning and the bore log, regardless of which crew is on site. That applies to routes near Interstate 20 as well as local service work.
Does Rowena soil in Tye create a steel corrosion concern, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across 64% of Tye, including areas with Rowena soil. We use whatever coating the line owner chooses for steel casing or tracer wire at a Union Pacific track crossing in Tye. HDPE does not share the same soil corrosion concern. The right material depends on the line design and what the owner specifies for the route.
What ground will a bore pass through in Tye around Rowena soil?
Rowena is mapped across 38% of Tye, and the USDA soil survey maps clay in 56% of the area about 40 inches below the surface. Clay loam accounts for another 35% at that depth. That sticky ground can ball up on a reamer, so staged reaming and fluid control matter for a bore near Indian Creek or North Street.
Is there rock near the surface in Tye, and how much bedrock is mapped?
Weathered bedrock is mapped within 60 inches across 14% of Tye, and the typical mapped depth is 34 inches. Hard bedrock is not mapped in that interval. A route near FM 707 still needs planning for the conditions at its actual depth, since a soil map is not a test boring.
Who approves a utility bore under Interstate 20 in Tye?
For a crossing in Interstate 20 right of way, the utility owner submits the application through TxDOT’s RULIS system, and the TxDOT Abilene District reviews it. For a filing on a Tye bore, we provide the bore plan and profile for submission. The permit sets the required cover, with the district able to require a different depth.
What does a Tye bore under Union Pacific track require?
A bore under the Union Pacific Baird Subdivision needs an agreement from Union Pacific. That agreement sets crossing requirements such as casing, depth and flagging. The railroad has 3.15 track miles inside Tye, so the proposed route needs to identify where it meets the track before plans are prepared.
How much 811 notice do I need for a Tye bore near North Street?
For North Street work, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If a Tye start slips more than 14 days past the original notice, we make a new request. We have worn or moved marks in Tye refreshed through Texas811 before work continues.
How far is Tye from Abilene and Trinity’s Yukon main office?
Tye is 7.5 miles west of Abilene and 299 road miles from our Yukon, Oklahoma main office, a 5.9 hour drive. That distance can affect mobilization for a bore near Interstate 20. A map pin and route scope help us assess the travel and site work together.
What affects the cost of a directional bore near Interstate 20 in Tye?
The route and work scope set the price. A bore near Interstate 20 may involve pavement and a TxDOT permit, while one near the Union Pacific track or Indian Creek adds crossing planning. Length, pipe size, Rowena clay, utilities to expose, pits, excavator time and mobilization from Yukon also affect the job.
Where the Tye facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Tye
- U.S. Census Bureau, TIGER/Line 2024: Tye boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Tye
- U.S. Census Bureau, American Community Survey 2019 to 2023: Tye housing units and year built
- Macrostrat geologic map compilation: map units under Tye
- U.S. EPA Safe Drinking Water Information System: public water systems serving Tye
- U.S. Department of Transportation, North American Rail Network: track owners in Taylor County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Taylor County
- U.S. Geological Survey, Elevation Point Query Service: Tye elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Tye
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Tye
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Tye, Texas
Type the address of your job in Tye. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Tye
Same county: Potosi · Tuscola · Lawn · Trent. All counties: Texas county list.
