Cape Royale Texas Directional Boring: Burkeville Clay, FM 224 and Trinity River
Quick Answer: Along FM 224 and Cape Royal Drive, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines routed beneath roads and property access. The Yukon, Oklahoma main office is 421 road miles from Cape Royale, so the route to a job near Forest Cove affects mobilization. Burkeville clay is a major mapped soil, and sticky, swelling ground can load a reamer and grip pipe. Near the Trinity River, we plan the path and check the crossing before choosing the bore setup.
Cape Royale bores at a glance
- Unincorporated community in San Jacinto County, Texas. Population 657 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 421 miles, about 8.3 hours of driving.
- Ground: Burkeville soil is mapped on 29 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 224. State permit office: TxDOT Lufkin District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Trinity River and Indian Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near FM 224 in Cape Royale?
We take directional boring work in Cape Royale, an unincorporated community in San Jacinto County with 657 residents in the 2020 Census count. Along FM 224, Cape Royale Drive or Pine Harbour Drive, our crews can place water, sewer, gas, electric conduit or fiber without opening the full route, subject to site and utility checks.
Our main office is in Yukon, Oklahoma, and Cape Royale work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a service near Cape Royal Drive, our range runs from 3/4 inch service lines to 48 inch casing and from 10 feet to 5,000 feet. Our family business started in 1965 and has done directional boring since 1982, experience we bring to the FM 224 plan.

What does Burkeville soil mean for boring in Cape Royale?
The USDA soil survey maps Burkeville soil across 29 percent of Cape Royale, with Wiergate clay across 13 percent and Woodville fine sandy loam across 7 percent. Clay makes up 42 percent of the mapped surface texture, and at 40 inches the survey maps clay across 49 percent of the area, with average clay content of 62 percent at that depth. That heavy clay can hold an open hole, but it may stick to the reamer and swell around pipe when wet. These are mapped patterns, not a test at a Forest Cove address.
| USDA soil survey, inside the Cape Royale mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Burkeville 29 percent, Wiergate 13 percent and Woodville 7 percent |
| Texture at the surface | clay 42 percent, fine sandy loam 7 percent and loamy fine sand 5 percent |
| Texture about 40 inches down | clay 49 percent |
| Engineering class about 40 inches down | fat clay (CH) 49 percent |
| Average clay content about 40 inches down | 62 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 9 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 51 percent of the area |
Bedrock is not mapped in the top five feet of Cape Royale, but the map does not rule out deeper rock. Seasonal water table is mapped within 40 inches across 9 percent of the area, so pits may need pumping. The survey maps high steel corrosion risk across 51 percent, a concern for steel casing and tracer wire. The mapped Massive Clay Decomposition Residuum is Cenozoic clay, coal and sand; the Miocene Fleming Formation includes clay and sandstone, so conditions can change below the surface.
How do we bore Cape Royale clay?
We bore Cape Royale clay with a staged plan because Burkeville soil and smectitic clay can swell when wet and grip pipe. At a Pine Harbour Drive route, we adjust fluid and reaming to the ground and watch returns near pavement.
- On Burkeville clay, we use a thinner fluid mix and polymer, then open the hole in stages so sticky cuttings do not build up on the reamer.
- Where heavy clay lies near FM 224 pavement, we watch returning fluid and keep pressure controlled to reduce the chance of lifting the surface.
- Before drilling near a marked line on Cape Royale Drive, we hydrovac pothole it; locate paint shows where it runs, not its depth.
- At a Trinity River route, we track the drill head from the surface, record depth and pitch, and plan the crossing before opening the bore.

Could Cape Royal Drive affect a bore in Cape Royale?
FM 224 is the mapped state highway inside Cape Royale, with 1.6 roadway miles in the community. Cape Royal Drive is the longest named street at 2.76 miles, followed by Cape Royale Drive at 2.57 miles and Forest Cove at 1.14 miles. Those routes can put a bore near pavement, driveways and other buried lines. A trenchless path can leave the road surface uncut, with work pits placed in dirt at the bore ends.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 224 | State highway | 1.6 roadway miles inside | State highway office |
| Trinity River | Stream | 1.22 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Indian Creek | Stream | 0.03 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Wolf Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Rocky Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
| Livingston Reservoir | Lake or pond | 34,837 acres, inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Cape Royale or within one mile outside its mapped boundary, so no local track crossing is identified. The mapped street and rail crossing count is none. The Trinity River runs 1.22 channel miles through the community, and one street crossing of a named stream is mapped. Livingston Reservoir is also within the community; a route near it needs a site specific crossing review.
Who approves a bore in Cape Royale, San Jacinto County?
Cape Royale has no city government, so a street approval comes from the county or the state agency responsible for that road. For work in FM 224 right of way, the line owner applies for a TxDOT utility permit through RULIS, and the TxDOT Lufkin District reviews it; we prepare the bore plan and profile for that filing. TxDOT cover depths depend on line type, including 60 inches at crossings for electric and communication lines and water lines. A Trinity River crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines in Cape Royale, San Jacinto County?
EPA drinking water records do not let us match a water provider to a specific Cape Royale address. Confirm the provider with the county or local water district before planning a bore near Cape Royale Drive. Entergy Texas and Sam Houston Electric Cooperative report electric service in San Jacinto County, but the line owner for the address must be confirmed before an electric conduit bore. That check sets whose existing facilities need to be protected along streets such as Forest Cove.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Entergy Texas and Sam Houston Electric Cooperative | Electric utilities reporting service in San Jacinto County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put Cape Royale’s median housing year at 1999; none of the housing units are reported as built before 1960, while 52 percent date from 1960 to 1999 and 48 percent from 2000 or later. That mix can mean either replacement lines or new service near Cape Royale Drive. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows position, not depth.

What is near Cape Royale and Coldspring?
Cape Royale is in San Jacinto County at an elevation of 165 feet, with 1.97 square miles of land and ZIP code 77331. Coldspring, the county seat, is 4.4 miles south; West Livingston is 7.3 miles northeast, and Point Blank is 8.2 miles northwest. Cape Royale is 421 road miles and an 8.3 hour drive from the Yukon, Oklahoma main office, a distance that affects mobilization for work near FM 224.
Places near Cape Royale
- Directional boring in Coldspring: 4.4 miles south
- Directional boring in West Livingston: 7.3 miles northeast
- Directional boring in Point Blank: 8.2 miles northwest
- Directional boring in Cedar Point: 10.7 miles north
- Directional boring in Goodrich: 11.4 miles east
Which jobs call for a bore near Cape Royale Drive?
- Highway crossing: A line beneath FM 224 needs a planned bore across the state highway right of way and review by the TxDOT Lufkin District.
- Water service: A new connection near Forest Cove needs its address specific water provider confirmed before the route and tie in are set.
- Fiber drop: A fiber conduit along Cape Royale Drive can pass beneath pavement instead of requiring an open cut across the street.
- Creek crossing: A route near the Trinity River needs crossing review during planning, including a check for federal waterway jurisdiction.
- Replacement line: A replacement near Pine Harbour Drive starts with locating and exposing marked utilities along the proposed path.
- Electric conduit: Near FM 224, the line owner and conduit requirements need confirmation before the bore plan is prepared.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Cape Royale bore near the Trinity River?
For a Cape Royale quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help show whether the route follows Cape Royale Drive, crosses FM 224 or approaches the Trinity River. That lets us review access, crossings and the work area before setting the scope.
The 421 road miles from Yukon are the first mobilization factor for a Cape Royale job. Burkeville clay affects drilling and reaming, while a route beneath FM 224 or near the Trinity River adds crossing and planning details. Length, pipe size, exposed utilities, pavement, creek or drainage crossings, pits, excavator time and sand backfill also affect the scope. High profile or emergency work can call for a different plan.
Questions people ask about boring in Cape Royale
Does Trinity take boring work in Cape Royale, San Jacinto County?
Yes. Trinity takes directional boring work in Cape Royale, with our own crews and support from vetted partner contractor satellite yards. You work with Trinity through the bore log even if a different crew is on site near Forest Cove or FM 224.
Who approves a bore under FM 224 in Cape Royale?
The utility that owns the line applies for the TxDOT utility permit through RULIS, and the TxDOT Lufkin District reviews the application. For FM 224, we prepare the bore plan and profile for the owner’s filing and work under the permit issued to that owner.
Can you bore beneath the Trinity River in Cape Royale?
A bore beneath the Trinity River can be evaluated during planning, but the route and site conditions determine the design. The river runs 1.22 channel miles through Cape Royale, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction before the plan is settled.
Who owns electric lines in Cape Royale, San Jacinto County, and who confirms conduit specs?
Entergy Texas and Sam Houston Electric Cooperative report electric service in San Jacinto County, but that does not identify the owner at every Cape Royale address. Confirm the line owner and conduit requirements for the specific location before planning a bore along Cape Royale Drive.
Who is responsible for Forest Cove in Cape Royale, and must it be cut?
Cape Royale is unincorporated and has no city government, so street approvals come from the county or state agency responsible for the road. A bore beneath Forest Cove can avoid cutting the street surface, with entry and exit pits placed off the paved route where access allows.
Do Cape Royale Drive homes tell us how old buried lines are in Cape Royale?
No. Housing age does not establish the age or location of a buried line. The American Community Survey puts the median housing year at 1999, with 48 percent of units built in 2000 or later. For replacement work near Cape Royale Drive, we expose marked utilities before drilling close to them.
What bore sizes and lengths can you handle near Pine Harbour Drive in Cape Royale?
For a Cape Royale job near Pine Harbour Drive, our range covers 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The route, ground and utility crossings help determine which setup fits the job.
How early should I call Texas811 for Cape Royal Drive in Cape Royale?
For a bore near Cape Royal Drive, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start moves more than 14 days past the original notice, request a new ticket. Along FM 224, we have worn or moved marks refreshed through Texas811 before boring work continues.
What affects the price of a Cape Royale bore near FM 224?
The scope sets the price for work near FM 224. Length, pipe size, Burkeville clay, utility crossings, pavement, creek or drainage crossings, pits and excavator time all matter. Mobilization also reflects the 421 road miles from Yukon, and a Trinity River route may add crossing review to the plan.
Where the Cape Royale facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Cape Royale
- U.S. Census Bureau, TIGER/Line 2024: Cape Royale boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Cape Royale population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Cape Royale housing units and year built
- Macrostrat geologic map compilation: map units under Cape Royale
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving San Jacinto County
- U.S. Geological Survey, Elevation Point Query Service: Cape Royale elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Cape Royale
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Cape Royale
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Cape Royale, Texas
Type the address of your job in Cape Royale. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Cape Royale
Same county: Shepherd · Oakhurst. All counties: Texas county list.
