Coldspring Texas Directional Boring: Pinetucky Soil, Texas State Highway 150, Henry Lake Branch
Quick Answer: Pinetucky fine sandy loam is common in Coldspring, where the loose surface can cave behind a drill bit. Along Texas State Highway 150, Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Coldspring, Texas. Coldspring is 426 road miles from our Yukon, Oklahoma main office, with Slade Street among the routes a project may follow. At about 40 inches, sandy clay loam dominates the mapped profile, so staged reaming helps manage changing ground.
Coldspring bores at a glance
- County seat of San Jacinto County, Texas. Population 882 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 426 miles, about 8.3 hours of driving.
- Ground: Pinetucky soil is mapped on 67 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 6 percent of the area.
- Highways inside the boundary: Texas State Highway 150, FM 1514, FM 2973 and Texas State Highway 156. State permit office: TxDOT Lufkin District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Henry Lake Branch and Rocky Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Texas State Highway 150 in Coldspring?
Trinity Boring Solutions takes directional boring work in Coldspring, San Jacinto County, including routes along Texas State Highway 150. The Census Bureau Vintage 2024 estimate of 882 gives us context as we plan boring access on Church Street. We install water, sewer, gas, electric conduit and fiber lines; in Coldspring, a bore could carry a new service along Church Street or extend conduit near Slade Street.
Our main office is in Yukon, Oklahoma, and Coldspring work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. From a 3/4 inch service line to 48 inch casing, our work ranges from short connections to long bores. The family business started in 1965 and has done directional boring since 1982, with Texas State Highway 150 among the local routes to plan around.

How does Pinetucky soil affect a bore in Coldspring?
Pinetucky fine sandy loam is the leading mapped soil in Coldspring, covering 67 percent of the area in the USDA soil survey. The surface is mostly fine sandy loam, while about 40 inches down, sandy clay loam is mapped across 97 percent of the area. Average clay content at that depth is 28 percent. The loamy fine sand surface and underlying clay rich soil can behave differently along a bore, so the route needs to be managed as conditions change. We treat mapped Pinetucky and Doucette soils as planning context, not a substitute for test borings.
| USDA soil survey, inside the Coldspring city limits | What is mapped |
|---|---|
| Soil series mapped | Pinetucky 67 percent, Doucette 20 percent, Stringtown 6 percent, Boykin 5 percent and Woodville 3 percent |
| Texture at the surface | fine sandy loam 75 percent and loamy fine sand 25 percent |
| Texture about 40 inches down | sandy clay loam 97 percent and clay 3 percent |
| Engineering class about 40 inches down | clayey sand (SC) 92 percent, lean clay (CL) 6 percent and fat clay (CH) 3 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | 6 percent of the area (0 percent hard rock, 6 percent weathered rock) |
| Seasonal water table within 60 inches | 3 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 3 percent of the area |
The soil survey maps bedrock within 60 inches in 6 percent of Coldspring, and that mapped bedrock is weathered; hard bedrock is not mapped at that depth. Seasonal water tables within 60 inches cover 3 percent, and flood prone soils are not mapped. High steel corrosion risk covers 3 percent, so the line owner should consider casing and tracer wire materials. The Massive Clay Decomposition Residuum is Cenozoic and includes clay and sand; its clay can swell when wet and shrink when dry.
How do we drill Coldspring sandy clay loam?
In Coldspring, sandy clay loam below the Pinetucky surface calls for a bore plan that controls fluid and keeps the hole stable. We adjust the reaming sequence to the ground along the route.
- Pinetucky fine sandy loam covers 67 percent of Coldspring, so we stage the reaming and have the pipe ready before the last pass through loose ground.
- Sandy clay loam is mapped at about 40 inches down across 97 percent of the area; we track the drill head and log depth and pitch as the bore advances.
- Where Coldspring’s clay rich soil grips the reamer, we manage drilling fluid and complete the pullback the same day the hole is opened.
- Near Henry Lake Branch, we plan the bore depth around the channel and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

What does a bore have to cross near Henry Lake Branch in Coldspring?
A Coldspring bore may need to pass beneath Texas State Highway 150, which has 3.2 mapped roadway miles inside the city, or another state route. FM 1514, FM 2973 and Texas State Highway 156 are also within the limits. Slade Street is the longest named street at 1.21 miles, followed by Church Street at 1.17 miles and Bar Park Loop at 0.83 miles. A bore can keep pavement and driveways intact while a line passes below them.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 150 | State highway | 3.2 roadway miles inside | State highway office |
| FM 1514 | State highway | 1.4 roadway miles inside | State highway office |
| FM 2973 | State highway | 1.2 roadway miles inside | State highway office |
| Texas State Highway 156 | State highway | 1.1 roadway miles inside | State highway office |
| Henry Lake Branch | Stream | 0.86 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Rocky Creek | Stream | 0.18 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Double Lake Branch | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Ross Branch | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Clear Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Mill Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Coldspring or within one mile outside its limits, so the mapped street and rail crossing count is none. Henry Lake Branch has 0.86 channel miles inside the city, and Rocky Creek has 0.18. Two street crossings of named streams are mapped. A route near Henry Lake Branch needs creek conditions checked during planning; no lake or pond is mapped within one mile.
Who approves a bore in San Jacinto County near Coldspring?
For work in the Texas State Highway 150 right of way in Coldspring, TxDOT is the permitting authority, and the TxDOT Lufkin District reviews the highway application. The utility that owns the line submits it through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. Coldspring is an incorporated city in San Jacinto County, so we plan street boring with its municipal status in mind. A Henry Lake Branch crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are buried in San Jacinto County near Coldspring?
The water provider for a specific Coldspring address must be confirmed with the city, San Jacinto County or the local water district before planning a bore. Electric service reported in the county includes Entergy Texas and Sam Houston Electric Cooperative, but that does not identify the line owner at every address. Before an electric conduit bore near Church Street, we can hydrovac marked lines to see their actual depth and position.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Entergy Texas and Sam Houston Electric Cooperative | Electric utilities reporting service in San Jacinto County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Coldspring’s median housing year at 1986; we plan Texas State Highway 150 crossings around site conditions. On FM 1514, we adapt work to site conditions; survey says 19 percent of homes predate 1960, 53 percent date 1960 to 1999, and 28 percent date 2000 or later. A replacement bore along Faulkner Avenue may involve older services, while a newer connection may need a different route. Near Rocky Creek, we expose marked utilities before drilling and account for the crossing in our work plan.

What is near Coldspring, including Shepherd?
Coldspring is the county seat of San Jacinto County, at an elevation of 368 feet and covering 1.86 square miles. ZIP code 77331 serves Coldspring, and we plan boring access with nearby Shepherd as a local reference. Cape Royale is 4.4 miles north; Shepherd is 10.1 miles southeast; West Livingston is 10.2 miles northeast and is the nearest larger city. Goodrich is 11.1 miles east, and Point Blank is 12.0 miles northwest. From our Yukon yard, Coldspring is 426 road miles and an 8.3 hour drive, which affects mobilization for work near Texas State Highway 150.
Places near Coldspring
- Directional boring in Cape Royale: 4.4 miles north
- Directional boring in Shepherd: 10.1 miles southeast
- Directional boring in West Livingston: 10.2 miles northeast
- Directional boring in Goodrich: 11.1 miles east
- Directional boring in Point Blank: 12 miles northwest
Which jobs call for a bore near Slade Street in Coldspring?
- Highway crossing: A bore beneath Texas State Highway 150 avoids cutting existing pavement and must follow the TxDOT permit plan.
- Street service: A water or sewer connection along Church Street can pass beneath the roadway instead of opening a trench across it.
- Fiber route: Electric conduit or fiber near Slade Street can be placed below the surface while keeping the street crossing intact.
- Creek crossing: A route beneath Henry Lake Branch needs depth planning around the channel and a jurisdiction check during planning.
- Utility replacement: A replacement line near Faulkner Avenue can use hydrovac potholing to expose marked utilities before drilling near them.
- Conduit bore: Near FM 1514, we confirm the electric line owner before planning a conduit route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a directional boring quote for Faulkner Avenue in Coldspring?
For a Coldspring quote, start with the address or map pin, such as a point on Faulkner Avenue. Tell us what will go underground, whether it is water pipe or fiber conduit, the size, and the expected footage. A sketch or plans showing the route toward Texas State Highway 150 help us review crossings and access.
Price depends on the Coldspring job details. The 426 road miles from Yukon affect mobilization, while Pinetucky soil and sandy clay loam influence drilling and reaming. We also account for pipe or conduit size, bore length, marked utilities to expose, pavement, and crossings such as Henry Lake Branch. Pit work, excavator time, sand backfill, and high profile or emergency conditions can change the scope.
Questions people ask about boring in Coldspring
Does Trinity Boring Solutions take jobs in Coldspring, San Jacinto County, and who staffs them?
Yes. We take directional boring work in Coldspring, San Jacinto County, with our own crews and partner contractors from satellite yards. Our Yukon, Oklahoma main office remains the point of contact from the first call through the bore log, including a project along Texas State Highway 150.
How old are Coldspring homes near Church Street, and what does that mean for replacement bores?
Coldspring’s median housing year is 1986, according to the American Community Survey 2019 to 2023 five year estimates. Older housing can mean a replacement service route needs careful checking, but it does not establish the age or location of a buried line. Along Church Street, we expose marked utilities before drilling near them.
What ground should I expect for a Coldspring bore through Pinetucky soil?
The USDA soil survey maps Pinetucky fine sandy loam across 67 percent of Coldspring. About 40 inches down, sandy clay loam is mapped across 97 percent of the area. That change from a fine sandy surface to clay rich ground can affect hole stability, so the drilling and reaming approach needs to account for both.
Is rock likely on a Coldspring bore route?
The soil survey maps weathered bedrock within 60 inches in 6 percent of Coldspring; hard bedrock is not mapped at that depth. That does not rule out rock deeper down or outside the mapped areas. The route near Texas State Highway 156 still needs to be planned for conditions found during drilling.
Who approves a Coldspring bore beneath Texas State Highway 150?
TxDOT reviews work in the Texas State Highway 150 right of way through the Lufkin District. The utility that owns the line files the application through TxDOT’s online RULIS system. We prepare the bore plan and profile for the owner and work under the permit issued to that utility.
Can a Coldspring line be bored under Henry Lake Branch?
A bore under Henry Lake Branch can be planned, but the route and channel conditions need review. The branch has 0.86 channel miles inside Coldspring, and creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. The bore plan must account for the channel rather than assume a crossing is clear.
How much notice does Texas811 need for a Coldspring bore along Slade Street?
The excavator or contractor makes the Texas811 locate request describing the planned bore along Slade Street. Texas law requires notice at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips beyond that period, make a new request; refresh marks that wear off or move.
Does Coldspring’s distance from West Livingston change a bore job?
Coldspring is 426 road miles and an 8.3 hour drive from our Yukon, Oklahoma main office. West Livingston is 10.2 miles northeast and is the nearest larger city, but the Yukon distance can affect mobilization for a job near Slade Street. The route, equipment and scope help determine what the trip requires.
What affects the cost of a Coldspring bore near Texas State Highway 150?
The job scope sets the price, not a single standard rate. Length, pipe or conduit size, Pinetucky ground, utilities to expose, pavement and a Henry Lake Branch crossing can all affect the work. Mobilization from Yukon matters too, as do pits, excavator time, backfill, and high profile or emergency conditions.
Where the Coldspring facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Coldspring
- U.S. Census Bureau, TIGER/Line 2024: Coldspring boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Coldspring
- U.S. Census Bureau, American Community Survey 2019 to 2023: Coldspring housing units and year built
- Macrostrat geologic map compilation: map units under Coldspring
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving San Jacinto County
- U.S. Geological Survey, Elevation Point Query Service: Coldspring elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Coldspring
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Coldspring
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Coldspring, Texas
Type the address of your job in Coldspring. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Coldspring
Same county: Oakhurst. All counties: Texas county list.
