trinityboringsolutions.com

Colleyville Texas Directional Boring: Gasil, Little Bear Creek, Fort Worth and Western Railroad

Quick Answer: Colleyville’s USDA soil survey maps fine sandy loam at the surface, with sandy clay loam common at about 40 inches and weathered bedrock within 60 inches across 20 percent of the area. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Colleyville, including routes beneath Texas State Highway 26. Colleyville is 210 road miles from our Yukon, Oklahoma main office, and Glade Road runs 7.91 miles within the city. At 40 inches, sandy clay loam maps under 52 percent of Colleyville, so clay can load a reamer and calls for staged passes.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Colleyville bores at a glance

  • Incorporated city in Tarrant County, Texas. Population 26,012 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 210 miles, about 4.2 hours of driving.
  • Ground: Gasil soil is mapped on 34 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 20 percent of the area.
  • Highways inside the boundary: Texas State Highway 26. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Fort Worth and Western Railroad, with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Little Bear Creek and Big Bear Creek.
  • Public water: City of Colleyville, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring along Glade Road in Colleyville?

We take directional boring calls in Colleyville, Tarrant County, including routes along Glade Road. The USDA soil survey maps fine sandy loam at the surface and sandy clay loam in 52 percent of the area at about 40 inches. The Census Bureau Vintage 2024 estimate puts Colleyville’s population at 26,012. We install water, sewer, gas, electric conduit and fiber along streets such as Glade Road and Boulevard 26.

Our main office is in Yukon, Oklahoma, and Colleyville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. A Colleyville route beneath Glade Road is a smaller local crossing to plan against that reach. We are a family business started in 1965, with directional boring work dating to 1982.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Gasil soil mean for boring in Colleyville?

The USDA soil survey maps Gasil across 34 percent of Colleyville, including Gasil fine sandy loam map units on different slopes. Fine sandy loam is the surface texture across 77 percent of the city, while loamy fine sand accounts for 15 percent. At about 40 inches, sandy clay loam is mapped under 52 percent of the area, with clay under 18 percent and sandy clay under 17 percent. For Colleyville planning, we treat mapped soil patterns as screening information, not test borings, before selecting a boring approach. Clay can stick to a reamer and grip pipe, so the route and drilling fluid need to match the ground encountered.

USDA soil survey, inside the Colleyville city limitsWhat is mapped
Soil series mappedGasil 34 percent, Rader 17 percent, Crosstell 16 percent, Silstid 15 percent and Pulexas 5 percent
Texture at the surfacefine sandy loam 77 percent and loamy fine sand 15 percent
Texture about 40 inches downsandy clay loam 52 percent, clay 18 percent and sandy clay 17 percent
Engineering class about 40 inches downlean clay (CL) 58 percent, fat clay (CH) 17 percent and clayey sand (SC) 15 percent
Average clay content about 40 inches down32 percent
Bedrock mapped within 60 inches20 percent of the area (0 percent hard rock, 20 percent weathered rock)
Seasonal water table within 60 inches17 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel37 percent of the area
Mapped as urban land (disturbed fill)1 percent of the area

Weathered bedrock is mapped within 60 inches across 20 percent of Colleyville, while hard bedrock is not mapped at that depth. Seasonal water tables are mapped within 60 inches across 17 percent, and flood prone soils across 7 percent; Little Bear Creek is a place to assess carefully for a crossing. Across Colleyville, we account for high steel corrosion risk mapped across 37 percent by considering casing and tracer wire materials for the line. The Woodbine Formation, a Cenomanian unit of sandstone and mudstone, is mapped here. Weathered rock may slow a bore compared with soil.

How do crews handle sandy clay loam in Colleyville?

Colleyville’s sandy clay loam at about 40 inches can shift from workable soil to sticky clay along a route. We adjust fluid and reaming to the ground rather than treating every street crossing alike.

  1. Where Colleyville’s sandy clay loam gives way to clay, we use thinner fluid and polymer, then ream in stages to manage sticky cuttings.
  2. Along paved streets such as Glade Road, we watch fluid returns closely; pressure in Colleyville’s heavier clay must not lift pavement.
  3. For a route near Little Bear Creek, we plan for mapped seasonal water and flood prone soils, with small pits and pumping if water enters.
  4. At marked utilities beside Boulevard 26, we hydrovac pothole before the drill approaches, then track depth and pitch from the surface.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Can a bore cross the Fort Worth and Western Railroad in Colleyville?

Texas State Highway 26 has 4.2 mapped roadway miles inside Colleyville, so a crossing in its right of way needs TxDOT planning. Texas State Highway 121 touches the city limits, while Texas State Highway 114, Texas State Highway 360 and Texas State Highway 183 are also nearby. Glade Road is the longest named street at 7.91 miles within the city; Boulevard 26 and Colleyville Boulevard each run 4.2 miles, and Cheek Sparger Road runs 3.91 miles. A bore can pass beneath pavement without cutting the road surface.

CrossingTypeMapped extentWho has a say
Texas State Highway 26State highway4.2 roadway miles insideState highway office
Texas State Highway 121Highway nearbyRuns along or touches the city limitsState highway office
Texas State Highway 114Highway nearby0.6 miles outsideState highway office
Texas State Highway 360Highway nearby0.9 miles outsideState highway office
Texas State Highway 183Highway nearby1.4 miles outsideState highway office
Fort Worth and Western RailroadRailroad3.15 track miles insideThe railroad
Little Bear CreekStream4.72 channel miles insideChecked for Corps of Engineers jurisdiction
Big Bear CreekStream4.53 channel miles insideChecked for Corps of Engineers jurisdiction
Sulphur BranchStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Mesquite BranchStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Sulphur Branch CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Fort Worth and Western Railroad has 3.15 track miles inside Colleyville, and public records map three street and rail crossings. A route beneath that track needs an agreement from the railroad that owns it. Little Bear Creek has 4.72 channel miles in the city and Big Bear Creek has 4.53; nine street crossings of named streams are mapped. Creek routes need depth planning, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Within one mile of Colleyville, we find no lakes or ponds mapped, which helps screen potential bore routes.

Whose permission does a Colleyville bore in Tarrant County need?

For work on Texas State Highway 26 right of way in Colleyville, TxDOT reviews the utility permit through its Fort Worth District. The utility owner, not the drilling contractor, submits the application in TxDOT’s online RULIS system; we prepare the bore plan and profile for the owner’s filing. TxDOT rules require boring or tunneling beneath existing highway pavement. City streets such as Glade Road belong to the City of Colleyville. The Fort Worth and Western Railroad crossing needs an agreement from the railroad owner, and a Little Bear Creek crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Colleyville water system?

The City of Colleyville public water system uses purchased surface water and reports 10,741 service connections serving 26,599 people. For an electric conduit bore near Boulevard 26, we confirm the line owner before setting the route. Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri County Electric Cooperative and United Electric Cooperative Service report electric service in Tarrant County; that countywide list does not identify the provider at every Colleyville address.

Line ownerWhat it isSourceSize
City of ColleyvillePublic water systemSurface water bought from another system10,741 connections, 26,599 people served
Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Tarrant CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We use the American Community Survey 2019 to 2023 five year estimates, which put Colleyville’s median housing year at 1994, to frame underground planning. The estimates show 1 percent of homes built before 1960, 68 percent from 1960 to 1999 and 31 percent in 2000 or later. Housing age alone does not establish the age of a buried line, so a replacement bore along Cheek Sparger Road still needs utility checks. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows location, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

What is near Colleyville and how far is it from Bedford?

Colleyville is an incorporated city in Tarrant County, covers 13.12 square miles and sits at an elevation of 630 feet. For Colleyville work, we use ZIP code 76034 as a local reference when coordinating underground project communications. Bedford is 3.3 miles south, Hurst is 4.2 miles southwest and Southlake is 4.4 miles north. North Richland Hills, the nearest larger city listed, is 4.6 miles southwest; Fort Worth, the county seat, is 13.8 miles southwest. From our Yukon yard, Colleyville is 210 road miles and a 4.2 hour drive, a distance that affects mobilization for Glade Road work.

Places near Colleyville

What would we bore near Little Bear Creek in Colleyville?

  • Highway crossing: A bore beneath Texas State Highway 26 keeps the route below pavement, with the utility owner applying to TxDOT for right of way work.
  • Water service: A connection near the City of Colleyville system needs its route checked against existing lines before a bore starts.
  • Fiber conduit: A run along Glade Road can pass beneath driveways and pavement without opening a trench through the street.
  • Creek crossing: A Little Bear Creek bore needs depth planning below the channel and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: A route beneath the Fort Worth and Western Railroad needs the track owner’s crossing agreement and its specified conditions.
  • Sewer replacement: A bore near Cheek Sparger Road can replace a buried line while avoiding open cuts across the street surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Colleyville bore under Texas State Highway 26?

For a Colleyville quote, send the address or map pin, what is going underground, the pipe or conduit size and the footage; a sketch or plans help. A route under Texas State Highway 26 or near Little Bear Creek is useful to mark on the map. Those features show where we need to account for highway access, creek conditions and possible utility crossings.

The price reflects the Colleyville job, not length alone. The 210 road miles from Yukon affect mobilization, while Gasil soil and clay at depth can change drilling time and reaming. A Texas State Highway 26 crossing, Fort Worth and Western Railroad track, or Little Bear Creek route adds crossing details to plan. Pipe size, exposed utilities, pavement, creek or drainage work, pits, excavator time and sand backfill also shape the scope; emergency or high profile work can change the plan.

Questions people ask about boring in Colleyville

Does Trinity take directional boring work in Tarrant County’s Colleyville, and who staffs it?

Yes, we take directional boring work in Colleyville, Tarrant County. Our crews do the work, and we also use satellite yards operated by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, whether our own crew or a partner crew is at the site.

How old are homes and buried lines near Boulevard 26 in Colleyville?

The American Community Survey 2019 to 2023 estimates put Colleyville’s median housing year at 1994, but that does not establish the age of a buried line near Boulevard 26. A replacement bore still needs utility locating and potholing. We expose each marked utility on the route before drilling close to it.

Can groundwater or flood prone ground affect bore pits near Little Bear Creek in Colleyville?

It can. The USDA soil survey maps seasonal water tables within 60 inches across 17 percent of Colleyville and flood prone soils across 7 percent. Near Little Bear Creek, we plan pit placement and depth for wet ground, and pump water from pits if needed.

Does Gasil soil in Colleyville corrode steel, and what pipe should a bore use?

The soil survey maps high steel corrosion risk across 37 percent of Colleyville, but that does not mean every Gasil route has the same conditions. The line owner selects material and any coating for steel casing or tracer wire. On Colleyville routes, we can consider HDPE because it is not subject to that soil corrosion concern.

What ground will a Colleyville bore pass through in Gasil soil?

Gasil is mapped across 34 percent of Colleyville, and fine sandy loam is the common surface texture. At about 40 inches, sandy clay loam is mapped under 52 percent of the area. That clay bearing ground can stick to the reamer, so staged reaming and controlled fluid help manage the hole.

How much of Colleyville has bedrock mapped within five feet, and is it hard?

Weathered bedrock is mapped within 60 inches across 20 percent of Colleyville, which is the survey’s top five feet. Hard bedrock is not mapped at that depth. The Woodbine Formation includes sandstone and mudstone, so a bore may slow where it meets weathered rock.

What bore sizes and lengths can you handle near Cheek Sparger Road in Colleyville?

For Colleyville work, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a Cheek Sparger Road route, the needed size and footage help us choose a suitable drill setup and account for the ground and crossings.

How much Texas811 notice is needed for a Colleyville bore along Glade Road?

For a Glade Road bore, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. On Colleyville projects, if the start slips more than 14 days past the original notice, we make a new request. Before work continues in Colleyville, we have worn or moved marks refreshed through Texas811.

What affects the cost of a Colleyville directional bore near Texas State Highway 26?

The route and scope determine the price, with no single factor deciding it. Mobilization from Yukon, Gasil soil and clay, pipe size, bore length, exposed utilities, pavement, pits and equipment time all matter. A Texas State Highway 26, railroad or creek crossing can add planning and crossing work.

Where the Colleyville facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Colleyville

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Colleyville, Texas

Type the address of your job in Colleyville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Colleyville

Same county: Fort Worth · Arlington · Grand Prairie · Mansfield · Grapevine · Keller · Haltom City · Saginaw · Benbrook · Watauga · Crowley · White Settlement. All counties: Texas county list.