trinityboringsolutions.com

Edroy Texas Directional Boring: Victoria Clay, Union Pacific, Hondo Creek

Quick Answer: Directional boring Edroy TX includes horizontal directional drilling (HDD), and Trinity Boring Solutions can route lines beneath Hondo Creek without cutting its banks. Edroy has 23.45 public road centerline miles inside the mapped community boundary, and the Yukon main office is 577 road miles away, so mobilization is part of planning for work near Bradshaw Circle. Victoria clay is mapped across much of Edroy; sticky clay can build on a reamer and grip pipe, so we manage fluid and ream in stages. Union Pacific track and Texas State Highway 234 also make route clearance and crossing plans important.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Edroy bores at a glance

  • Unincorporated community in San Patricio County, Texas. Population 422 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 577 miles, about 11.3 hours of driving.
  • Ground: Victoria soil is mapped on 38 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 234 and FM 796. State permit office: TxDOT Corpus Christi District.
  • Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Hondo Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles boring near Bradshaw Circle in Edroy?

Trinity Boring Solutions handles directional boring in Edroy, where Bradshaw Circle is the longest named street, 23.45 public road centerline miles lie inside the mapped community boundary, and Hondo Creek runs through the community. The 2020 Census count is 422 people in this unincorporated part of San Patricio County. We install water, sewer, gas, electric conduit and fiber along routes such as Bradshaw Circle and County Road 1648.

Our main office is in Yukon, Oklahoma, and Edroy work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch casing under the Arkansas River in Tulsa; beside that reach, a typical Edroy job is a shorter service or utility route near Bradshaw Circle. Our family business started in 1965, and we have done directional boring since 1982; we use that experience in Edroy planning.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Victoria soil indicate in Edroy?

The USDA soil survey maps Victoria soil across 38% of Edroy and Willacy soil across 29%, so the route can change texture within this small community. Victoria clay 0 to 1 percent slopes covers 36% of the mapped area. At about 40 inches below the surface, clay is mapped in 56% of the area, while the average clay content at that depth is 43%. Surface mapping shows clay across 48% and fine sandy loam across 33%; these are mapped patterns, not test borings.

USDA soil survey, inside the Edroy mapped community boundaryWhat is mapped
Soil series mappedVictoria 38 percent, Willacy 29 percent, Raymondville 8 percent, Monteola 5 percent and Sinton 5 percent
Texture at the surfaceclay 48 percent, fine sandy loam 33 percent and sandy clay loam 9 percent
Texture about 40 inches downclay 56 percent and sandy clay loam 42 percent
Engineering class about 40 inches downfat clay (CH) 48 percent, lean clay (CL) 45 percent and clayey sand (SC) 5 percent
Average clay content about 40 inches down43 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches5 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel62 percent of the area

We account for Edroy bedrock not mapped in the top five feet while allowing for rock deeper down. The Delta Sand and Silt geologic unit of Pleistocene age includes sand, silt and clay, so conditions can vary along a bore. Seasonal water table is mapped within 60 inches across 5% of the area, and flood prone soils across 10%, making creek side depth and pit drainage worth planning. High steel corrosion risk is mapped across 62%; the line owner should consider casing and tracer wire materials.

What planning does boring through Edroy clay require?

Edroy’s mapped clay calls for controlled fluid and staged reaming, especially where Victoria clay is present. Along a route toward Hondo Creek, we also plan pit placement and the bore depth around the ground and crossing.

  1. At a Victoria clay location in Edroy, we use controlled drilling fluid and ream in stages to manage sticky cuttings that can collect on the reamer.
  2. Where heavy clay is mapped near Bradshaw Circle, we watch fluid returns and pressure so drilling does not lift pavement or nearby slabs.
  3. Before working near a marked line along County Road 1648, we hydrovac expose it; paint indicates position, not burial depth.
  4. For a route near Hondo Creek, we plan pits and bore depth around drainage, track the drill head from the surface and log depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where does a line have to go under Union Pacific in Edroy?

A bore in Edroy may need to pass beneath Texas State Highway 234 or FM 796, and Interstate 37 runs along or touches the mapped community boundary. Bradshaw Circle is the longest named street at 0.95 miles inside the community; Private Road 1631 measures 0.35 miles, while County Road 1648 and County Road 1660 each measure 0.15 miles. These routes help locate a crossing, but the exact address determines access, utilities and the bore path.

CrossingTypeMapped extentWho has a say
Texas State Highway 234State highway0.6 roadway miles insideState highway office
FM 796State highway0.3 roadway miles insideState highway office
Interstate 37Highway nearbyRuns along or touches the city limitsState highway office
Union PacificRailroad0.89 track miles insideThe railroad
Hondo CreekStream1.72 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 0.89 track miles inside Edroy on its Corpus Christi Subdivision, and public mapping shows two street and rail crossings in the community. A crossing plan has to account for the railroad’s requirements. Hondo Creek has 1.72 channel miles inside Edroy, with three mapped street crossings of named streams. A creek route needs its own depth and access planning, and the crossing is checked for federal waterway jurisdiction during planning.

Who approves a bore in San Patricio County near Edroy?

Edroy has no city government, so street and permit authority rests with San Patricio County or the state, depending on the route. For work in the right of way of Texas State Highway 234, FM 796 or Interstate 37, the line owner applies for the TxDOT utility permit through RULIS; the TxDOT Corpus Christi District reviews it. For Edroy, we prepare the bore plan and profile and work under the permit issued to the utility owner. A Union Pacific crossing needs an agreement with the railroad, and a Hondo Creek route is checked for U.S. Army Corps of Engineers jurisdiction. TxDOT rules require boring or tunneling under existing highway pavement.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in San Patricio County near Edroy?

Before planning a bore at an Edroy address, we confirm the water provider with the county or local water district. EPA drinking water records do not tie a water system to this community, so the provider cannot be matched from those records. AEP Texas Central and San Patricio Electric Cooperative report electric service in San Patricio County; that does not establish which company serves each Edroy address. Before planning an electric conduit bore in Edroy, we confirm the line owner.

Line ownerWhat it isSourceSize
AEP Texas Central and San Patricio Electric CooperativeElectric utilities reporting service in San Patricio CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Edroy’s median housing year at 2002; 61% of housing units were built in 2000 or later and 39% from 1960 to 1999. That mix can mean a route near Bradshaw Circle serves newer connections or encounters existing lines that need replacement. We hydrovac expose marked utilities before drilling near them, since locate paint shows a line’s position, not its depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

How far is Edroy from Robstown and the Yukon office?

Edroy is in San Patricio County, at an elevation of 90 feet, and covers 2.21 square miles within its mapped community boundary. We use Edroy ZIP codes 78370 and 78352 to check the address before planning underground work. Odem is 5.5 miles east, and San Patricio is 6.0 miles west; Robstown, the nearest larger city, is 11.5 miles south. Sinton, the county seat, is 11.9 miles northeast. The Yukon, Oklahoma yard is 577 road miles and an 11.3 hour drive away, which affects mobilization for work near Texas State Highway 234.

Places near Edroy

What would we bore near County Road 1648 in Edroy?

  • Highway crossing: A line beneath Texas State Highway 234 is bored or tunneled under existing pavement, with the route planned for the highway right of way.
  • Water service: A service route near Bradshaw Circle starts with confirming the address provider and locating marked lines along the proposed path.
  • Fiber conduit: A conduit route near County Road 1648 can be planned around existing utilities, with each marked conflict exposed before drilling nearby.
  • Creek crossing: A bore beneath Hondo Creek needs a planned depth and access on both banks, with the crossing checked for federal jurisdiction.
  • Rail crossing: A route under Union Pacific track in Edroy needs the railroad’s crossing agreement and a plan matched to its requirements.
  • Roadside utility: Work near FM 796 may need a TxDOT utility permit if the route occupies state highway right of way.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote near County Road 1660 in Edroy?

For an Edroy quote, send a map pin or address because the exact spot near County Road 1660 or Hondo Creek can change the crossing and access plan. For an Edroy bore, tell us what will go underground, the pipe or conduit size, and the footage. A sketch or plans help us trace the route past streets, tracks and marked utilities.

The Edroy job route sets the price through its ground, crossings and logistics. Victoria clay can call for staged reaming, while a route under Union Pacific or Texas State Highway 234 adds crossing work. Length, pipe or conduit size, exposed utilities, pavement, creek crossings, pits, excavator time and backfill also affect the scope. Mobilization matters at 577 road miles from Yukon, especially if the route is near Hondo Creek or requires emergency scheduling.

Questions people ask about boring in Edroy

Does Trinity take directional boring work in Edroy, San Patricio County?

Yes, Trinity takes directional boring work in Edroy, San Patricio County, and can staff it with company crews or crews from vetted partner drilling contractors. You work with Trinity from the first call through the bore log, including for a route near Bradshaw Circle. Our crews install water, sewer, gas, electric conduit and fiber.

Could a bore in Edroy encounter rock below the mapped top five feet?

A bore in Edroy is not mapped through bedrock in the top five feet, but deeper rock cannot be ruled out. The geologic map shows Delta Sand and Silt of Pleistocene age, with sand, silt and clay. A route near Hondo Creek still needs field assessment because mapped geology does not substitute for checking the actual bore path.

Who approves a bore beneath Texas State Highway 234 in Edroy?

For a bore in the Texas State Highway 234 right of way, the line owner submits the TxDOT utility permit application through RULIS, and the TxDOT Corpus Christi District reviews it. We prepare the bore plan and profile for the owner’s application. The route near FM 796 also needs the applicable state highway right of way review.

What does an Edroy bore under Union Pacific track require?

A bore beneath the Union Pacific track in Edroy needs an agreement from the railroad that owns it. The agreement governs crossing conditions such as casing, depth and flagging. Since 0.89 track miles of the Union Pacific Corpus Christi Subdivision lie inside the community, the route and railroad crossing details need to be established before work is planned.

Can a line be bored under Hondo Creek in Edroy?

Yes, a line can be planned beneath Hondo Creek in Edroy, with the bore depth and bank access set for the crossing. The creek has 1.72 channel miles inside the community, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. A mapped street crossing may affect the route and pit locations.

Who owns electric lines in Edroy, San Patricio County, and who confirms conduit specs?

AEP Texas Central and San Patricio Electric Cooperative report service in San Patricio County, but that does not identify the electric provider at every Edroy address. The line owner for the specific location confirms conduit specifications before a bore is planned. That check matters for a route near County Road 1648 as well as elsewhere in the community.

Does Edroy’s distance from Robstown change a bore mobilization?

Edroy is 577 road miles from Trinity’s Yukon, Oklahoma main office, while Robstown is 11.5 miles south and is the nearest larger city. The Yukon distance can affect mobilization and job logistics, including for a route near Texas State Highway 234. We plan the crew and equipment around the actual address and scope.

How much notice does Texas811 need for a bore on Bradshaw Circle in Edroy?

For a bore on Bradshaw Circle, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For Edroy scheduling, we follow Texas811’s description of at least two working days. If the start moves more than 14 days past the original notice, a new request is needed; worn or moved marks must be refreshed through Texas811 before work resumes.

What affects the cost of directional boring near Texas State Highway 234 in Edroy?

The Edroy route and scope determine the price, not the highway name alone. Length, pipe size, Victoria clay, exposed utilities, pavement, crossings and pit work all matter. A route beneath Texas State Highway 234 can require highway planning, while a Hondo Creek crossing changes access needs. Mobilization from Yukon also factors into the job.

Where the Edroy facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Edroy

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Edroy, Texas

Type the address of your job in Edroy. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Edroy

Same county: Portland · Ingleside · Aransas Pass · Sinton · Mathis · Taft · Gregory · Taft Southwest · Ingleside on the Bay · St. Paul · Lakeshore Gardens-Hidden Acres · Lake City. All counties: Texas county list.