Morgan Farm Texas Directional Boring: Calallen Soil, US 77 and Peters Swale
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), work in Morgan Farm, Texas, including routes near US 77. Morgan Farm is 572 road miles from our Yukon, Oklahoma main office, so US 77 access matters when we plan crew mobilization. Calallen sandy clay loam covers much of the mapped area and can make cuttings sticky around the reamer. Peters Swale and Chiltipin Creek also call for a route planned around the channel and banks.
Morgan Farm bores at a glance
- Unincorporated community in San Patricio County, Texas. Population 573 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 572 miles, about 11.2 hours of driving.
- Ground: Calallen soil is mapped on 44 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 77, US 77 Business and FM 1945. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Peters Swale and Chiltipin Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near US 77 in Morgan Farm?
Trinity Boring Solutions takes directional boring work in Morgan Farm, San Patricio County, where US 77 and FM 1945 offer routes for new lines. The Census Bureau counted 573 people here in the 2020 Census; it does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber, with routes that could follow a street such as San Patricio Avenue or cross US 77.
Our main office is in Yukon, Oklahoma, and Morgan Farm work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a short service near San Patricio Avenue or a longer crossing under US 77, our range runs from 3/4 inch service lines and 10 feet to 48 inch casing and 5,000 feet. Our family business started in 1965, and we have done directional boring since 1982; those years support the varied line work around Morgan Farm.

How does Calallen soil affect drilling in Morgan Farm?
Calallen soil is the main mapped soil series in Morgan Farm, covering 44 percent of the community. The USDA soil survey maps Calallen sandy clay loam on 44 percent of the area, and sandy clay loam accounts for 66 percent of the mapped texture at about 40 inches below the surface. Clay accounts for 34 percent at that depth, while the average clay content is 36 percent. We treat Morgan Farm’s mapped soil patterns as planning information, not test borings for a proposed crossing. For a route near County Road 2253, the clay rich ground can cling to the reamer and slow cleanup.
| USDA soil survey, inside the Morgan Farm mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Calallen 44 percent, Imogene 16 percent, Banquete 10 percent, Raymondville 9 percent and Victoria 8 percent |
| Texture at the surface | sandy clay loam 44 percent, clay 25 percent and fine sandy loam 21 percent |
| Texture about 40 inches down | sandy clay loam 66 percent and clay 34 percent |
| Engineering class about 40 inches down | lean clay (CL) 69 percent, fat clay (CH) 25 percent and clayey sand (SC) 6 percent |
| Average clay content about 40 inches down | 36 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 8 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 25 percent of the area |
Bedrock is not mapped in the top five feet in Morgan Farm, which does not rule out deeper rock. The USDA soil survey maps a seasonal water table within 60 inches across 8 percent of the area, so pits may need pumping. For work in Morgan Farm, we do not read the mapped soils as showing flood prone soils. High steel corrosion risk covers 25 percent, so the line owner should weigh casing and tracer wire materials. The Beaumont Formation, areas predominantly sand, is mapped as Pleistocene material; sandy pockets can need drilling fluid and staged reaming to keep the hole open.
What does it take to bore Morgan Farm sandy clay loam?
On a Morgan Farm route through Calallen sandy clay loam, we manage sticky cuttings and check the drill path as we advance. A bore near Peters Swale also needs a plan that accounts for the channel.
- Calallen sandy clay loam can leave sticky cuttings on the reamer, so we use a thinner drilling fluid and enlarge the hole in stages near County Road 2253.
- Where the mapped ground is heavy clay, we watch fluid returns along US 77 to keep pressure from lifting pavement.
- We hydrovac pothole every marked utility on a Morgan Farm bore path before drilling near it; paint beside San Patricio Avenue shows position, not depth.
- Near Peters Swale, we track the drill head from the surface and record depth and pitch, while planning pits clear of the channel banks.

What is in the way of a new line in Morgan Farm near Union Pacific?
Morgan Farm has US 77, US 77 Business and FM 1945 inside its mapped community boundary, so a route crossing one of these roads needs careful placement. Texas State Highway 188 is 1.0 mile outside the boundary. Among named local streets, County Road 2253 runs 1.21 miles in the community, County Road 1416 runs 0.75 miles and San Patricio Avenue runs 0.43 miles. A bore can pass below pavement without cutting it, subject to the road authority’s permit and route requirements.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 77 | US highway | 3.2 roadway miles inside | State highway office |
| US 77 Business | US highway | 0.1 roadway miles inside | State highway office |
| FM 1945 | State highway | 2.7 roadway miles inside | State highway office |
| Texas State Highway 188 | Highway nearby | 1 miles outside | State highway office |
| Union Pacific | Railroad nearby | 0 miles outside | The railroad |
| Peters Swale | Stream | 0.68 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Chiltipin Creek | Stream | 0.53 channel miles inside | Checked for Corps of Engineers jurisdiction |
Union Pacific runs along or touches the Morgan Farm boundary, but no railroad is mapped inside the community and no street and rail crossing is mapped there. A route that reaches the track still needs the railroad’s crossing agreement. Peters Swale runs 0.68 channel miles inside the community, and Chiltipin Creek runs 0.53 miles; two street crossings of named streams are mapped. Those creek routes call for attention to the channel and banks. We plan Morgan Farm boring routes with no mapped lakes or ponds within one mile.
Who approves a Morgan Farm bore in San Patricio County?
Morgan Farm has no city government, so San Patricio County or the state handles street and road permissions according to who controls the route. US 77, US 77 Business and FM 1945 are state highways, and TxDOT’s Corpus Christi District reviews right of way utility permits. The utility owner files through TxDOT’s RULIS system; we prepare the bore plan and profile for its application and work under the permit issued to that owner. A route reaching Union Pacific track needs an agreement with the railroad. Peters Swale and Chiltipin Creek crossings are checked during planning for U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Morgan Farm, San Patricio County?
The water provider for a specific Morgan Farm address needs to be confirmed with the county or local water district before a bore is planned. EPA drinking water records do not tie water systems in Texas to towns in a way that identifies a provider for this address. AEP Texas Central and San Patricio Electric Cooperative report electric service in San Patricio County, but the line owner at the bore location must be confirmed before planning conduit. That check helps establish the conduit requirements for a route near US 77.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central and San Patricio Electric Cooperative | Electric utilities reporting service in San Patricio County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Morgan Farm’s median year built at 1979; 13 percent of homes were built before 1960, 72 percent from 1960 to 1999 and 15 percent in 2000 or later. Housing age does not establish the age or position of buried lines near County Road 1416. For replacement work or a new service, we hydrovac pothole each marked utility on the planned path before drilling near it, since surface paint does not show depth.

Do you cover Morgan Farm and nearby Sinton?
Morgan Farm is an unincorporated community in San Patricio County, 3.9 miles southwest of Sinton, the county seat and nearest larger city. The mapped community covers 3.34 square miles and sits at an elevation of 49 feet. Its ZIP code is 78387. Del Sol is 2.1 miles east, while Loma Linda and La Paloma Addition are each 3.3 miles east; Rancho Chico is 3.7 miles east. From our Yukon, Oklahoma main office, the drive is 572 road miles and 11.2 hours, which affects planning for work around FM 1945.
Places near Morgan Farm
- Directional boring in Del Sol: 2.1 miles east
- Directional boring in Loma Linda: 3.3 miles east
- Directional boring in La Paloma Addition: 3.3 miles east
- Directional boring in Rancho Chico: 3.7 miles east
- Directional boring in Sinton: 3.9 miles northeast
What boring work comes up near San Patricio Avenue in Morgan Farm?
- Highway crossing: A route beneath US 77 can keep the road surface intact while the utility owner secures the required TxDOT permit.
- Water service: A new service near County Road 1416 needs the provider confirmed for that address before the bore is planned.
- Fiber conduit: A fiber route along San Patricio Avenue can use a bore to avoid opening the street surface.
- Creek crossing: A line near Peters Swale needs a path planned around the channel and a check for federal jurisdiction.
- Rail crossing: A route reaching the Union Pacific boundary needs the railroad’s agreement before crossing track.
- Drainage crossing: An unnamed drainage route near County Road 2253 needs a plan that accounts for pits and surface access.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Morgan Farm bore near Business 77?
For a Morgan Farm quote, tell us where the work is, such as a map pin near Business 77, and what needs to go underground. Include the pipe or conduit size and the route length. A sketch or plans help show if the line approaches US 77, County Road 2253 or Peters Swale, since each can change the route and equipment plan.
A short, accessible service beside San Patricio Avenue is simpler to plan than a route under US 77 or toward Union Pacific track. Price depends on footage, pipe or conduit size, Calallen soil conditions, and how many buried utilities need exposure. Pavement, creek or drainage crossings, pits, backfill and excavator time also shape the work. Morgan Farm’s 572 road miles from Yukon can affect mobilization, and emergency or high profile work may add planning demands.
Questions people ask about boring in Morgan Farm
Does Trinity Boring Solutions take jobs in Morgan Farm, San Patricio County, and how are crews staffed?
Yes, we take directional boring work in Morgan Farm and across Texas. Our crews handle the work, with partner drilling contractors from vetted satellite yards supporting jobs when needed. Customers deal with Trinity from the first call through the bore log, regardless of which crew is on site near US 77.
What does a Morgan Farm bore under Union Pacific track need?
A bore under Union Pacific track needs a crossing agreement from the railroad that owns it. For a Morgan Farm crossing, we follow the agreement’s conditions for casing, depth and flagging. Since Union Pacific runs along or touches the Morgan Farm boundary, the route must be checked for a track crossing before the plan is finalized.
Can a line be bored under Peters Swale in Morgan Farm?
A line can be considered for a bore under Peters Swale, but the route and conditions must be reviewed first. The channel runs 0.68 miles inside Morgan Farm, and a crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction. The plan also needs to account for the channel and banks.
Who owns electric lines in Morgan Farm, San Patricio County, and who confirms conduit specs?
AEP Texas Central and San Patricio Electric Cooperative report electric service in San Patricio County, but that does not identify the owner at every Morgan Farm address. Confirm the line owner for the specific route before planning a conduit bore. That owner can confirm the conduit requirements for work near FM 1945.
Does Morgan Farm or the county control San Patricio Avenue, and must it be cut?
Morgan Farm is unincorporated and has no city government, so San Patricio County handles local street permissions. A directional bore can pass beneath San Patricio Avenue without opening the pavement, subject to the applicable permission and route plan. State highways such as US 77 are handled by TxDOT.
Do the homes and buried lines near County Road 1416 in Morgan Farm date from the same period?
The housing data does not establish the age of buried lines near County Road 1416. The American Community Survey 2019 to 2023 estimates give Morgan Farm a median home construction year of 1979. For a replacement bore, we locate and expose marked utilities before drilling near them, then plan the new line around what is found.
How far is Morgan Farm from Trinity’s Yukon office, and does Sinton change the job plan?
Morgan Farm is 572 road miles and an 11.2 hour drive from our Yukon, Oklahoma main office. Sinton is 3.9 miles northeast and is the county seat, but it does not change that distance. The trip is part of planning mobilization for work near FM 1945 or Peters Swale.
How much Texas811 notice does a bore near County Road 2253 in Morgan Farm need?
For a bore near County Road 2253, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If our Morgan Farm start moves more than 14 days past the original notice, we make a new request. Marks that wear off or move must be refreshed before work continues.
What factors do we weigh for directional boring costs in Morgan Farm near US 77?
The route and scope set the cost near US 77. Length, pipe size, Calallen soil, pavement, creek or drainage crossings, and the number of utilities to expose all affect the plan. Pits and excavator time may add work, and mobilization reflects the 572 road miles from Yukon.
Where the Morgan Farm facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Morgan Farm
- U.S. Census Bureau, TIGER/Line 2024: Morgan Farm boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Morgan Farm population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Morgan Farm housing units and year built
- Macrostrat geologic map compilation: map units under Morgan Farm
- U.S. Department of Transportation, North American Rail Network: track owners in San Patricio County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving San Patricio County
- U.S. Geological Survey, Elevation Point Query Service: Morgan Farm elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Morgan Farm
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Morgan Farm
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Morgan Farm, Texas
Type the address of your job in Morgan Farm. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Morgan Farm
Same county: Portland · Ingleside · Aransas Pass · Mathis · Taft · Odem · Gregory · Taft Southwest · Ingleside on the Bay · St. Paul · Lakeshore Gardens-Hidden Acres · Lake City. All counties: Texas county list.
