trinityboringsolutions.com

Hearne Texas Directional Boring: Tabor Soil, Lost Creek And Union Pacific

Quick Answer: In Hearne, the USDA soil survey maps loamy fine sand and fine sandy loam near the surface, with sandy clay loam and clay common under about 40 inches. Union Pacific has 13.46 track miles in the city, and Trinity Boring Solutions takes Texas directional boring work, also called horizontal directional drilling (HDD), for routes beneath those tracks. Hearne is 360 road miles from our Yukon, Oklahoma main office, a distance that can affect mobilization. Sandy clay loam can cling to tooling, while sandy layers need support to keep the bore open.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hearne bores at a glance

  • Incorporated city in Robertson County, Texas. Population 4,641 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 360 miles, about 6.9 hours of driving.
  • Ground: Tabor soil is mapped on 19 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 9 percent of the area.
  • Highways inside the boundary: US 79, US 190, Texas State Highway 6, FM 485 and FM 391. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: Union Pacific, with 20 mapped street and rail crossings.
  • Named streams inside the boundary: Lost Creek and Sandy Creek.
  • Public water: City of Hearne, groundwater wells.
  • Electric: City of Hearne municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Hearne near Union Pacific tracks?

Trinity Boring Solutions takes directional boring work in Hearne for water, sewer, gas, electric conduit and fiber routes along streets such as San Gabriel Street or near US 79. The USDA soil survey maps loamy fine sand and fine sandy loam at the surface, with sandy clay loam and clay below. Hearne is in Robertson County, and the Census Bureau Vintage 2024 estimate puts its population at 4,641.

Our main office is in Yukon, Oklahoma, and Hearne work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began directional boring in 1982, and four decades of work means we plan around the changing layers mapped beneath Hearne, from loamy surface soils to clay at depth. On Hearne projects, we coordinate with Trinity from the first call through the bore log, regardless of which crew is on site.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Hearne and Tabor soil?

The USDA soil survey names Tabor soil as the leading series in Hearne, covering 19 percent of mapped area, while Silawa accounts for 17 percent and Wilson for 13 percent. Surface mapping is mostly loamy fine sand at 54 percent, with fine sandy loam at 30 percent and loam at 16 percent. At about 40 inches, sandy clay loam is mapped under 42 percent and clay under 32 percent. For Hearne, we use mapped patterns, not test borings, to guide underground planning. That mix can change how the hole holds and how much fluid the ream needs.

USDA soil survey, inside the Hearne city limitsWhat is mapped
Soil series mappedTabor 19 percent, Silawa 17 percent, Wilson 13 percent, Robco 12 percent and Eufaula 11 percent
Texture at the surfaceloamy fine sand 54 percent, fine sandy loam 30 percent and loam 16 percent
Texture about 40 inches downsandy clay loam 42 percent, clay 32 percent and loamy fine sand 12 percent
Engineering class about 40 inches downlean clay (CL) 63 percent, fat clay (CH) 19 percent and silty sand (SM) 12 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inches9 percent of the area (0 percent hard rock, 9 percent weathered rock)
Seasonal water table within 60 inches33 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel52 percent of the area

Hearne soil mapping shows bedrock within 60 inches across 9 percent of the area, with typical bedrock depth at 26 inches, so some routes may meet weathered rock early. A seasonal water table is mapped within 60 inches across 33 percent, while flood prone soils cover 3 percent. High steel corrosion risk is mapped across 52 percent, so the line owner should review casing and tracer wire materials. The mapped alluvial clay, silt, sand, and gravel unit is Pleistocene; Middle Eocene sedimentary rock is also mapped. Variable layers call for checking returns and adjusting the drilling plan.

What does it take to bore Hearne sandy clay loam?

For Hearne routes through sandy clay loam and clay, we adjust fluid and reaming to keep the hole stable without building excess pressure beneath pavement on US 79.

  1. In Hearne’s mapped sandy clay loam and clay, we use a thinner drilling fluid and staged reaming so sticky cuttings do not build up on the reamer.
  2. Where loamy fine sand is mapped in Hearne, we support the bore wall with drilling fluid and have the pipe ready before the final ream.
  3. With a seasonal water table mapped within 60 inches across 33 percent of Hearne, we plan compact pits and pumping where site conditions call for it.
  4. Before drilling near a marked line along Brown Street or US 79, we hydrovac expose it; a walkover locator tracks the drill head and logs depth and pitch.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Which roads, tracks or creeks could a Hearne bore cross near Lost Creek?

Hearne bores may need to pass beneath US 79, US 190, Texas State Highway 6, or local streets without cutting the traveled surface. Market Street runs 3.03 miles in the city, Brown Street 2.34 miles, and San Gabriel Street 1.97 miles, so the route and access point matter. FM 485, FM 391 and FM 50 also run inside the limits. Where a route meets an existing highway pavement, the work is planned as a bore or tunnel rather than an open cut.

CrossingTypeMapped extentWho has a say
US 79US highway3.9 roadway miles insideState highway office
US 190US highway3.7 roadway miles insideState highway office
Texas State Highway 6State highway3.2 roadway miles insideState highway office
FM 485State highway0.9 roadway miles insideState highway office
FM 391State highway0.6 roadway miles insideState highway office
FM 50State highway0.3 roadway miles insideState highway office
Union PacificRailroad13.46 track miles insideThe railroad
Lost CreekStream1.87 channel miles insideChecked for Corps of Engineers jurisdiction
Sandy CreekStream1.19 channel miles insideChecked for Corps of Engineers jurisdiction
Little Brazos RiverStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Little Pin Oak CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Pin Oak CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Suggs BranchStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 13.46 track miles in Hearne, and public mapping shows 20 street and rail crossings. Any proposed track crossing needs an agreement from Union Pacific, with the agreement defining crossing conditions such as casing, depth and flagging. Lost Creek runs 1.87 channel miles in the city and Sandy Creek 1.19 miles; seven mapped street crossings intersect named streams. A creek route is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Do I need a permit to bore under US 79 in Hearne?

A bore in the US 79 right of way needs a TxDOT utility permit, reviewed by the TxDOT Bryan District; the line owner files through TxDOT’s online RULIS system, and we prepare the bore plan and profile for that filing. The same process applies to US 190, Texas State Highway 6 and the farm to market roads in Hearne. TxDOT rules require boring or tunneling beneath existing highway pavement, with a crossing extending beneath all travel lanes on rural highways. City streets such as Market Street belong to the city. A Union Pacific track crossing requires an agreement with the railroad, and Lost Creek is checked for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Hearne and Robertson County?

The City of Hearne public water system uses groundwater wells and reports 2,470 service connections serving 4,959 people, so a route near Market Street may encounter water infrastructure. The city also owns its municipal electric system, which reports 2,685 customers. We confirm the line owner and conduit requirements for the specific Hearne address before planning an electric conduit bore, rather than assuming the same lines serve every property.

Line ownerWhat it isSourceSize
City of HearnePublic water systemGroundwater wells2,470 connections, 4,959 people served
City of Hearne municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration2,685 customers reported
Entergy Texas, Texas-New Mexico Power, City of Bryan and Navasota Valley Electric CooperativeElectric utilities reporting service in Robertson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Hearne’s median housing year at 1970; 34 percent of homes were built before 1960, 55 percent from 1960 to 1999, and 11 percent in 2000 or later. A replacement bore along Brown Street may need to work around older buried lines as well as new service connections. Texas811 paint gives position, not depth, so we hydrovac expose marked utilities on the bore path before the drill approaches them.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

How far is Hearne from Calvert and our Yukon yard?

Hearne is in Robertson County, covers 4.12 square miles and sits at an elevation of 293 feet. The city uses ZIP code 77859. Calvert is 8.4 miles northwest, Gause is 9.8 miles southwest, and Franklin, the county seat, is 12.1 miles northeast. Bryan, the nearest larger city listed, is 19.3 miles southeast. From Hearne, our Yukon, Oklahoma main office is 360 road miles away, a 6.9 hour drive that we account for when planning work. That distance is part of planning crew and equipment mobilization for a bore near US 79.

Places near Hearne

What would we bore near Hearne’s San Gabriel Street?

  • Highway crossing: A bore beneath US 79 can keep the roadway surface intact while carrying water, sewer or conduit across the route.
  • Water service: A connection near Market Street can tie into the City of Hearne water system after the existing line location is exposed.
  • Fiber route: A fiber bore along San Gabriel Street can pass beneath pavement and driveways without opening a continuous trench.
  • Creek crossing: A route beneath Lost Creek needs a depth plan for the channel and a check for federal jurisdiction during planning.
  • Rail crossing: A utility route beneath Union Pacific track needs the railroad’s crossing agreement and its specified casing and depth.
  • Replacement service: A bore near Brown Street can route around older buried utilities after marked lines are exposed by hydrovac.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Hearne bore near Davis Street?

A map pin matters on Davis Street because the exact route can determine whether a bore meets a street, a marked utility or a creek. For Hearne work, send us the address or pin, what will go underground, the pipe or conduit size, and the footage. A sketch or plans help us understand the proposed path and access for the bore.

The price follows the job conditions, not just the distance drilled. Ground such as Tabor soil and the sandy clay loam mapped under Hearne can affect tooling and fluid needs. Crossings of US 79, Union Pacific tracks or Lost Creek add planning and exposure work. Pavement, concrete, pits, excavator time and sand backfill also matter. Hearne’s 360 road miles from Yukon can affect mobilization, while high profile or emergency work may change the schedule and resources required.

Questions people ask about boring in Hearne

Does Trinity Boring Solutions take jobs in Hearne and Robertson County?

Yes. We take directional boring work in Hearne and across Texas, with the job staffed by our own crews or from a satellite yard run by a partner contractor we have vetted. Our main office is in Yukon, Oklahoma, and Trinity stays responsible for the work from the first call through the bore log, including routes near US 79.

Who owns electric lines in Hearne, Robertson County, and who confirms conduit specs?

The City of Hearne owns its municipal electric system, which reports 2,685 customers. We confirm the line owner and conduit specifications for the project address before planning a conduit bore, since the mapped city system does not identify the owner of every line near Market Street or elsewhere in Hearne.

Does the city or county control San Gabriel Street in Hearne, and must it be cut?

San Gabriel Street is a city street because Hearne is incorporated. A directional bore can pass beneath its pavement without cutting a continuous trench across the road. We still plan the entry and exit pits and expose marked utilities along the proposed route before drilling near them.

How old are buried lines near Brown Street in Hearne, and can a replacement be bored?

Hearne’s median housing year is 1970, and American Community Survey estimates show 34 percent of homes were built before 1960. A replacement route near Brown Street may pass older buried services, so we use Texas811 marks and hydrovac potholing to confirm line positions before the drill approaches.

Can groundwater or flood prone ground affect bore pits near Lost Creek in Hearne?

It can. Hearne mapping shows a seasonal water table within 60 inches across 33 percent of the area and flood prone soils across 3 percent. Near Lost Creek, we account for wet pits and plan the bore depth beneath the channel; the crossing is also checked for U.S. Army Corps of Engineers jurisdiction.

Does Tabor soil in Hearne corrode steel, and what pipe should a bore use?

Hearne soil mapping identifies high steel corrosion risk across 52 percent of the area, so the line owner should review steel casing and tracer wire materials. Tabor soil covers 19 percent of the mapped area, but the route specific soil and line requirements determine the material choice. HDPE avoids that particular soil corrosion concern.

Does Trinity cover Calvert and rural sites outside Hearne?

We take work across Texas, including requests for routes near Calvert and rural sites outside Hearne city limits. Calvert is 8.4 miles northwest of Hearne. Share the site location and proposed route so we can assess the work and the crew mobilization it requires.

How much notice does Texas811 need before a bore near Market Street in Hearne?

Paint near Market Street shows a line’s position, not its depth. Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the notice, make a new request; worn or moved marks need refreshing through Texas811 before work continues.

What affects the cost of a directional bore near US 79 in Hearne?

The route and scope determine the price. Hearne’s mapped sandy clay loam can affect drilling conditions, while a crossing of US 79, Union Pacific track or Lost Creek adds crossing work. Pipe size, footage, utilities to expose, pavement, pits, excavator time and backfill also matter. The 360 road miles from Yukon can affect mobilization.

Where the Hearne facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hearne

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hearne, Texas

Type the address of your job in Hearne. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hearne

Same county: Bremond. All counties: Texas county list.