trinityboringsolutions.com

Hurst Texas Directional Boring: Rader Soil, Mesquite Branch and Trinity Railway Express

Quick Answer: The City of Hurst runs the public water system, while Oncor Electric Delivery Company reports service in Tarrant County, so we confirm the line owner before a bore near Precinct Line Road. Along Interstate 820, Trinity Boring Solutions takes directional boring work, also called horizontal directional drilling (HDD), in Hurst, Texas. The Yukon, Oklahoma main office is 215 road miles from Hurst, which affects mobilization for work near Mesquite Branch. Rader soil and sandy clay loam mapped below the surface can make the hole sticky, so the reaming plan matters.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hurst bores at a glance

  • Incorporated city in Tarrant County, Texas. Population 39,500 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 215 miles, about 4.2 hours of driving.
  • Ground: Rader soil is mapped on 22 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 19 percent of the area.
  • Highways inside the boundary: Interstate 820, Texas State Highway 10, Texas State Highway 121, Texas State Highway 183 and Texas State Highway 26. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Trinity Railway Express and Fort Worth and Western Railroad, with 4 mapped street and rail crossings.
  • Named streams inside the boundary: Mesquite Branch, Calloway Branch, Walker Branch and Little Bear Creek.
  • Public water: City of Hurst, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Hurst, Tarrant County?

Trinity Boring Solutions takes directional boring work in Hurst, Tarrant County, where the Census Bureau Vintage 2024 estimate puts the population at 39,500. Along Precinct Line Road and Interstate 820, we install water, sewer, gas, electric conduit and fiber lines by bore when the route calls for it. The City of Hurst water system and the electric line owner need to be identified before we plan a crossing.

Our main office is in Yukon, Oklahoma, and Hurst work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range runs from a 3/4 inch service line near Hurstview Drive to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. We are a family business started 1965, with directional boring since 1982, and bring that experience to planning along Norwood Drive.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should a Hurst bore expect in Rader soil?

Hurst has mapped Rader soil across 22 percent of its area, and the USDA soil survey shows sandy clay loam under about 40 inches across 36 percent. Clay is mapped at that depth across 22 percent, while the average clay content there is 35 percent. At the surface, fine sandy loam covers 78 percent. Mapped soil patterns in Hurst guide our planning, but we do not treat them as test borings. Near Precinct Line Road, the mix is a reason to plan for sticky cuttings and adjust the reaming approach to the ground at the bore location.

USDA soil survey, inside the Hurst city limitsWhat is mapped
Soil series mappedRader 22 percent, Crosstell 18 percent, Bastsil 18 percent, Gasil 14 percent and Urban land (miscellaneous area) 12 percent
Texture at the surfacefine sandy loam 78 percent, clay loam 4 percent and loamy fine sand 3 percent
Texture about 40 inches downsandy clay loam 36 percent, clay 22 percent and sandy clay 22 percent
Engineering class about 40 inches downlean clay (CL) 57 percent, fat clay (CH) 21 percent and silty clay (CL ML) 6 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inches19 percent of the area (0 percent hard rock, 19 percent weathered rock)
Seasonal water table within 60 inches22 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel45 percent of the area
Mapped as urban land (disturbed fill)12 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 19 percent of Hurst, with typical depth at 46 inches, so a bore near Mesquite Branch may slow where soil meets weathered rock. A seasonal water table is mapped within 40 inches across 22 percent, and flood prone soils across 7 percent, so creek work needs depth and pit planning. High steel corrosion risk is mapped across 45 percent; the line owner should weigh casing and tracer wire materials. The Woodbine Formation, of Cenomanian age, includes sandstone and mudstone, so the mapped ground can change along a route.

How do crews bore Hurst sandy clay loam?

Hurst soil maps show sandy clay loam below the surface and heavy clay in parts of the city. Near Precinct Line Road, we match fluid and reaming to the ground so the hole stays controlled without lifting pavement.

  1. At a Rader soil location, we keep drilling fluid suited to sticky clay and ream in stages, then pull the pipe on the same day the hole is opened.
  2. Where Hurst’s mapped heavy clay meets pavement near Texas State Highway 121, we watch fluid returns and keep pressure controlled to avoid lifting the surface.
  3. At Mesquite Branch, we plan depth below the channel and size the pits for the mapped seasonal water table, with pumping available if a pit takes on water.
  4. Before drilling near a marked line along Norwood Drive, we hydrovac pothole it; a walkover locator tracks the drill head while we log depth and pitch.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What does a Hurst bore cross near Precinct Line Road?

A Hurst bore may need to pass beneath Interstate 820 or Texas State Highway 121, both within the city, without opening the roadway. Texas State Highway 10, Texas State Highway 183 and Texas State Highway 26 also run inside Hurst. Precinct Line Road is the longest named street in the city at 5.72 miles, followed by Hurstview Drive at 5.17 miles and Norwood Drive at 4.27 miles. Those busy route choices make the exact crossing point and available work area important to the bore plan.

CrossingTypeMapped extentWho has a say
Interstate 820Interstate5.8 roadway miles insideState highway office
Texas State Highway 10State highway8.5 roadway miles insideState highway office
Texas State Highway 121State highway7.4 roadway miles insideState highway office
Texas State Highway 183State highway7.4 roadway miles insideState highway office
Texas State Highway 26State highway2.2 roadway miles insideState highway office
Trinity Railway ExpressRailroad2.4 track miles insideThe railroad
Fort Worth and Western RailroadRailroad0.76 track miles insideThe railroad
Mesquite BranchStream3.67 channel miles insideChecked for Corps of Engineers jurisdiction
Calloway BranchStream1.77 channel miles insideChecked for Corps of Engineers jurisdiction
Walker BranchStream1.72 channel miles insideChecked for Corps of Engineers jurisdiction
Little Bear CreekStream0.92 channel miles insideChecked for Corps of Engineers jurisdiction
Sulphur Branch CreekStream0.3 channel miles insideChecked for Corps of Engineers jurisdiction
Billy Creek BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Walker Branch CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Trinity Railway Express has 2.4 track miles in Hurst, and the Fort Worth and Western Railroad has 0.76 track miles; public records map 4 street and rail crossings in the city. A crossing under either railroad needs an agreement from the track owner. Mesquite Branch runs 3.67 channel miles in Hurst, and 27 street crossings of named streams are mapped. Creek routes need planning for the channel and a check for U.S. Army Corps of Engineers jurisdiction.

Who approves a Hurst bore by the Trinity Railway Express?

For Hurst work in state highway right of way, the utility that owns the line files the application in TxDOT’s online RULIS system, and the TxDOT Fort Worth District reviews it. For an owner’s application in Hurst, we provide the bore plan and profile for review of the proposed work. TxDOT rules require highway crossings for electric and communication lines to have at least 60 inches of cover below the lowest point of the crossed grade, and water lines 60 inches; pressurized sewer lines also need 60 inches. Along the right of way, electric and communication lines need 48 inches of cover and water lines 36 inches. Highway crossings are encased, and the permit can set different depths. A crossing of the Trinity Railway Express or Fort Worth and Western Railroad needs an agreement from the railroad that owns the track. Mesquite Branch is checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Hurst water system?

The City of Hurst public water system uses purchased surface water and reports 17,548 service connections serving 40,454 people. For an electric conduit bore near Euless Boulevard, the line owner must be confirmed rather than assumed from the address. Utilities reporting electric service in Tarrant County include Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative Service. Identifying the owner first helps set the conduit plan for the right system.

Line ownerWhat it isSourceSize
City of HurstPublic water systemSurface water bought from another system17,548 connections, 40,454 people served
Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Tarrant CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Hurst’s median housing year at 1974; 18 percent of homes were built before 1960, 73 percent from 1960 to 1999 and 9 percent in 2000 or later. A bore near Hurstview Drive may serve a replacement line or a newer connection, so we check the route rather than assume what is buried. We hydrovac pothole marked utilities before drilling near them because paint shows location, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Which nearby places, including North Richland Hills, can we reach from Hurst?

Hurst is an incorporated city in Tarrant County, at an elevation of 577 feet and covering 9.96 square miles. We use Hurst’s ZIP codes, 76053 and 76054, to identify the location before planning underground work. Bedford lies 2.7 miles east, North Richland Hills 2.8 miles northwest, Richland Hills 3.2 miles southwest, Colleyville 4.2 miles northeast and Watauga 4.8 miles northwest. Arlington, the nearest larger city, is 9.9 miles south; Fort Worth, the county seat, is 10.5 miles west. From the Yukon, Oklahoma main office, the road trip to Hurst is 215 miles and takes 4.2 hours, a factor in mobilization for work near Interstate 820.

Places near Hurst

Which Hurst jobs call for a bore near Mesquite Branch?

  • Highway crossing: A bore below Interstate 820 can keep the paved roadway intact while the utility passes beneath the permitted crossing.
  • Street service: Along Precinct Line Road, a water or sewer service bore can avoid opening the street surface.
  • Water connection: Near the City of Hurst system, we bore the planned route after the owner and existing lines are confirmed.
  • Creek crossing: A Mesquite Branch bore needs a route below the channel and planning for the waterway review.
  • Rail crossing: Under the Trinity Railway Express, the track owner’s agreement guides the crossing plan before the bore proceeds.
  • Fiber conduit: Along Hurstview Drive, a conduit bore can route fiber beneath pavement with marked utilities exposed first.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a Hurst bore quote near Euless Boulevard?

Start with a map pin or address near Euless Boulevard, because a few blocks can change which road, utility or stream crossing the bore needs. Tell us what will go in the ground, its pipe or conduit size and the footage. A sketch or plans help us lay out the route and check the crossing details before quoting.

The 215 road miles from Yukon affect mobilization for a Hurst job near Interstate 820. Rader soil and the mapped clay below it can change drilling time, while a Mesquite Branch crossing or Trinity Railway Express track adds crossing work. We also consider bore length and line size, utilities to expose, pavement, pit and excavator needs, sand backfill, and whether the work is high profile or an emergency. Those details shape the scope for the specific route.

Questions people ask about boring in Hurst

Does Trinity Boring Solutions take directional boring work in Hurst, Tarrant County?

Yes, we take directional boring work in Hurst, Tarrant County, including routes near Precinct Line Road and Interstate 820. Our main office is in Yukon, and we staff Hurst work with our crews or from satellite yards operated by partner drilling contractors we have vetted. You work with Trinity through the bore log.

Can a line be bored under Mesquite Branch in Hurst?

A line can be planned beneath Mesquite Branch, subject to the route, ground and crossing review. The stream runs 3.67 channel miles in Hurst, so the bore plan needs to account for the channel. During planning, we check whether the crossing is under U.S. Army Corps of Engineers jurisdiction.

In Hurst, who runs the public water system, and where does its water come from?

The City of Hurst owns and runs the public water system, which uses purchased surface water. Public records list 17,548 service connections serving 40,454 people. For a proposed connection near Euless Boulevard, confirming the system and line location helps us plan the bore route and avoid assuming what serves a specific address.

Which electric provider should I check for a Hurst bore in Tarrant County?

Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative Service report electric service in Tarrant County. That list does not identify the provider at every Hurst address. Confirm the owner before planning an electric conduit bore near a street such as Norwood Drive.

Does Hurst control Norwood Drive, and does a bore there require cutting the street?

Because Hurst is incorporated, we treat its city streets as city owned when planning a crossing. A directional bore along Norwood Drive can pass beneath the street without cutting its surface, depending on the route and site conditions. We check marked utilities and plan the entry and exit pits off the pavement where the site allows.

What do Hurstview Drive’s older homes mean for replacement bores?

Hurst’s median housing year is 1974, and the American Community Survey estimates 18 percent of homes were built before 1960. Near Hurstview Drive, a replacement bore may encounter existing buried utilities, but housing age alone does not show their location or depth. Near marked lines in Hurst, we expose them before drilling so the bore route can be planned around them.

What bore sizes and lengths can Trinity handle for a Hurst job near Euless Boulevard?

For work planned in Hurst, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A service route near Euless Boulevard may be small, while a longer crossing needs its own plan for access, ground and utilities. Send the proposed size and footage for the route.

How much notice does Texas811 need for a Hurst bore near Precinct Line Road?

For a Hurst bore near Precinct Line Road, plan around the ticket’s 20 day life and request a locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. Do not request earlier than 14 days before work. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of directional boring in Hurst near Interstate 820?

The route and work conditions determine the price near Interstate 820. Bore length and pipe size matter, as do Rader soil, pavement, utilities to expose and crossings such as the Trinity Railway Express or Mesquite Branch. Pit work, excavator time, sand backfill, emergency scope and mobilization from Yukon can also affect the job.

Where the Hurst facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hurst

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hurst, Texas

Type the address of your job in Hurst. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hurst

Same county: Fort Worth · Grand Prairie · Mansfield · Euless · Grapevine · Keller · Haltom City · Southlake · Saginaw · Benbrook · Crowley · White Settlement. All counties: Texas county list.