trinityboringsolutions.com

Onalaska Texas Directional Boring: Pinetucky Soil, US 190 and Magnolia Creek

Quick Answer: In Onalaska, the USDA soil survey maps fine sandy loam at the surface and mostly sandy clay loam at about 40 inches. We take directional boring, also called horizontal directional drilling (HDD), work beneath routes such as US 190 without cutting pavement. Onalaska is 420 road miles from our Yukon, Oklahoma main office, and Magnolia Creek can affect route planning. Pinetucky fine sandy loam covers 33 percent of the city, so staged reaming and controlled drilling fluid matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Onalaska bores at a glance

  • Incorporated city in Polk County, Texas. Population 3,367 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 420 miles, about 8.2 hours of driving.
  • Ground: Pinetucky soil is mapped on 33 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 32 percent of the area.
  • Highways inside the boundary: US 190, FM 3459, FM 356, FM 3186 and FM 3059. State permit office: TxDOT Lufkin District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Magnolia Creek.
  • Public water: Onalaska Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Onalaska near US 190?

Trinity Boring Solutions takes directional boring work in Onalaska, Polk County, including routes beneath US 190. The depth question for Onalaska is what the top five feet look like and what lies beneath: the USDA soil survey maps fine sandy loam at the surface and sandy clay loam commonly at about 40 inches. We use Onalaska’s Census Bureau Vintage 2024 population estimate of 3,367 as context when planning underground work along FM 356 Road. We install water, sewer, gas, electric conduit and fiber along routes such as FM 356 Road.

Our main office is in Yukon, Oklahoma, and Onalaska work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa. A typical Onalaska job is planned around its streets, soil and crossings, such as access along US 190. Our family business began in 1965, and we have done directional boring since 1982; Onalaska crossings beneath US 190 call for site specific planning.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Onalaska ground like to bore through Pinetucky soil?

The USDA soil survey maps Pinetucky fine sandy loam across 33 percent of Onalaska, the largest listed soil series. Colita covers 17 percent and Leggett 13 percent. Across the city, fine sandy loam is the mapped surface texture on 83 percent of the area. At about 40 inches below the surface, sandy clay loam is mapped across 66 percent, while clay accounts for 17 percent. Pinetucky, Colita, Leggett, and Woodville soil patterns guide our planning in Onalaska, but mapped soils are not test borings. Near a Pinetucky route, the surface can cut readily while the deeper clay needs controlled fluid and staged reaming.

USDA soil survey, inside the Onalaska city limitsWhat is mapped
Soil series mappedPinetucky 33 percent, Colita 17 percent, Leggett 13 percent, Woodville 8 percent and Oakhurst 8 percent
Texture at the surfacefine sandy loam 83 percent, very fine sandy loam 8 percent and loam 4 percent
Texture about 40 inches downsandy clay loam 66 percent, clay 17 percent and bedrock 7 percent
Engineering class about 40 inches downclayey sand (SC) 51 percent, fat clay (CH) 17 percent and lean clay (CL) 16 percent
Average clay content about 40 inches down29 percent
Bedrock mapped within 60 inches32 percent of the area (0 percent hard rock, 32 percent weathered rock)
Seasonal water table within 60 inches51 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel55 percent of the area

Weathered bedrock is mapped within 60 inches across 32 percent of Onalaska, with a typical depth of 39 inches, so a route may slow where the drill meets rock. Seasonal water tables occur within 60 inches across 51 percent of the area; small pits and pumping may help manage wet ground. Flood prone soils cover 4 percent, including areas where a Magnolia Creek crossing needs careful depth planning. We account for Polk County’s mapped high steel corrosion risk across 55 percent when considering underground work in Onalaska. The geologic map unit, Alluvial pebble gravel and sand, is Gelasian in age and includes unconsolidated sand, clay and silt.

How is a bore run through Onalaska sandy clay loam?

We run Onalaska bores through mapped sandy clay loam by balancing hole support against pressure, especially where a route approaches Magnolia Creek or pavement on US 190.

  1. At a Pinetucky fine sandy loam start, we use fluid to support loose material, then ream in stages so the hole stays ready for the pipe.
  2. Where Onalaska’s sandy clay loam grips the reamer, we adjust fluid and pull the product pipe the same day the final opening is made.
  3. Near mapped seasonal water table areas around Magnolia Creek, we keep pits compact and pump standing water so wet ground does not undermine setup.
  4. Before the drill approaches marked utilities, we hydrovac expose each one; for a proposed bore beneath Impala Drive, paint alone cannot show burial depth.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Which roads, tracks or creeks can a bore cross in Onalaska near FM 356 Road?

Onalaska routes can cross US 190, FM 3459, FM 356, FM 3186 or FM 3059, all mapped inside the city limits. US 190 has 4.0 roadway miles within the city, and FM 3459 has 3.4. Among named streets, FM 356 Road runs 2.46 miles, Old Groveton Road 2.37 miles and Impala Drive 1.49 miles. A bore beneath these roads can avoid cutting the surface, but the route and entry pits must fit the street and marked utility layout.

CrossingTypeMapped extentWho has a say
US 190US highway4 roadway miles insideState highway office
FM 3459State highway3.4 roadway miles insideState highway office
FM 356State highway3.1 roadway miles insideState highway office
FM 3186State highway1.5 roadway miles insideState highway office
FM 3059State highway0.4 roadway miles insideState highway office
Magnolia CreekStream1.99 channel miles insideChecked for Corps of Engineers jurisdiction
Trinity RiverStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Open Bottom CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Robinett BranchStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Livingston ReservoirLake or pond34,837 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Onalaska or within one mile outside its limits, so no local track crossing is shown. Magnolia Creek runs 1.99 channel miles in the city, and public mapping shows two street crossings of named streams. Livingston Reservoir, mapped inside the city, covers 34,837 acres. A planned bore near Magnolia Creek or the reservoir needs route and depth review, including checking whether a water crossing falls within U.S. Army Corps of Engineers jurisdiction.

Whose permission does an Onalaska bore in Polk County need?

For Onalaska, the cover depth sets the bore profile beneath US 190 and the other state roads; TxDOT Lufkin District reviews highway right of way permits. Electric and communication lines need 60 inches of cover at a highway crossing and 48 inches when running along the right of way. Water lines need 60 inches at crossings and 36 inches along the right of way, while pressurized sewer crossings need 60 inches. At FM 3459 in Onalaska, TxDOT rules call for boring or tunneling beneath existing highway pavement, so we plan crossings accordingly. The utility owner files through RULIS, and we prepare the bore plan and profile for that application. For streets such as FM 356 Road, Onalaska is incorporated, so the streets belong to the city. Magnolia Creek crossings are checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Onalaska near Onalaska Water Supply Corporation?

Onalaska Water Supply Corporation uses groundwater wells and reports 2,042 service connections serving 5,289 people. That system gives a proposed route near US 190 a local water line owner to confirm. Entergy Texas and Sam Houston Electric Cooperative report electric service in Polk County; the line owner for a specific address must be confirmed before planning an electric conduit bore, including one along FM 356 Road.

Line ownerWhat it isSourceSize
Onalaska Water Supply CorporationPublic water systemGroundwater wells2,042 connections, 5,289 people served
Entergy Texas and Sam Houston Electric CooperativeElectric utilities reporting service in Polk CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We use the American Community Survey 2019 to 2023 five year estimates placing Onalaska’s median housing year at 1993 as context for underground planning near Onalaska Loop. The estimates place 63 percent of housing in the 1960 to 1999 era and 37 percent in 2000 or later. A replacement bore near Old Groveton Road may need to account for existing lines whose age is not established by the housing data. We hydrovac expose every marked utility on the bore path before drilling near it; paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where is Onalaska in relation to West Livingston?

Onalaska is in Polk County, about 10.0 miles northwest of West Livingston, the nearest larger city. The city covers 5.44 square miles and sits at an elevation of 215 feet. ZIP code 77360 serves Onalaska. Cedar Point is 2.5 miles southeast, Point Blank is 8.0 miles southwest, and Livingston, the county seat, is 12.9 miles southeast. From our Yukon, Oklahoma main office, the road distance is 420 miles and the drive is 8.2 hours, which affects mobilization for work along US 190 or FM 356 Road.

Places near Onalaska

What boring work comes up in Onalaska near Magnolia Creek?

  • Highway crossing: A bore beneath US 190 follows TxDOT cover and pavement requirements while avoiding an open cut through the road.
  • Water service: A new service near Onalaska Water Supply Corporation needs a route checked against existing water lines and the proposed connection.
  • Fiber conduit: A conduit route along FM 356 Road can pass beneath pavement, with marked utilities exposed before drilling near them.
  • Creek crossing: A route beneath Magnolia Creek needs depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Street replacement: A bore near Old Groveton Road can replace a line beneath the street without cutting across its pavement.
  • Reservoir route: Work near Livingston Reservoir needs a planned alignment around water and access constraints at the proposed entry and exit pits.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for an Onalaska bore near Creeklake Drive?

A map pin near Creeklake Drive matters because a few blocks can change which utilities, pavement or drainage features a bore must cross. For an Onalaska quote, send the address or pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us follow the route and locate the entry and exit pits.

Onalaska pricing starts with the mapped soil and any rock along the route, because Pinetucky fine sandy loam and deeper sandy clay loam affect drilling and reaming. Length and pipe or conduit size matter next, along with the number of utilities to expose. Pavement on US 190, a Magnolia Creek crossing, pits, excavator time and sand backfill also shape the work. The 420 road miles from Yukon affect mobilization, and high profile or emergency work can add planning needs.

Questions people ask about boring in Onalaska

Does Trinity take directional boring jobs in Onalaska, Polk County, and who staffs them?

Yes, we take directional boring work in Onalaska, Polk County. Our own crews and vetted partner drilling contractors can staff the job, while Trinity remains your contact from the first call through the bore log. Access along US 190 and the mapped route help shape the crew plan.

Who controls Onalaska streets like Impala Drive, and does a bore cut the road?

The city of Onalaska controls its streets, including Impala Drive, because it is incorporated. A directional bore can pass beneath pavement without opening a trench across it. The route still depends on marked utilities and room for entry and exit pits.

How old are Onalaska homes and buried lines near Old Groveton Road?

The American Community Survey puts Onalaska’s median housing year at 1993, but that does not date buried lines near Old Groveton Road. Replacement bores need the actual line route and size, with marked utilities exposed before drilling near them.

Can groundwater or flood prone soil affect Onalaska bore pits near Magnolia Creek?

Yes. The USDA soil survey maps seasonal water tables within 60 inches across 51 percent of Onalaska and flood prone soils across 4 percent. Near Magnolia Creek, compact pits and pumping may help manage wet ground, while the bore route is planned below the channel.

Does Pinetucky soil in Onalaska corrode steel, and what pipe can I use?

The USDA soil survey maps high steel corrosion risk across 55 percent of Onalaska. The line owner can choose HDPE or specify protective treatment for steel casing and tracer wire. A route through Pinetucky fine sandy loam still needs site specific review.

What ground does a bore pass through in Onalaska’s Pinetucky soil?

The USDA soil survey maps Pinetucky fine sandy loam across 33 percent of Onalaska. About 40 inches below the surface, sandy clay loam is mapped across 66 percent. Those mapped layers help guide the drilling plan, but they are not a test of the exact bore path.

How much notice does Texas811 need for an Onalaska bore along FM 356 Road?

Paint along FM 356 Road shows utility position, not burial depth. Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, submit a new request; refresh worn or moved marks before continuing.

How far is Onalaska from Yukon, and does West Livingston change the job?

Onalaska is 420 road miles and an 8.2 hour drive from our Yukon, Oklahoma main office. West Livingston is 10.0 miles southeast of Onalaska, but that nearby city does not remove the mobilization distance from Yukon. Distance and access near US 190 help shape the work plan.

What affects the cost of a directional bore in Onalaska under US 190?

The route, not just its length, shapes a bore beneath US 190. Pinetucky soil and sandy clay loam, pipe size, utilities to expose, pavement, creek or drainage crossings, pit work and backfill all affect the scope. Mobilization from Yukon and any high profile or emergency demands also matter.

Where the Onalaska facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Onalaska

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Onalaska, Texas

Type the address of your job in Onalaska. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Onalaska

Same county: Corrigan · Indian Springs · Big Thicket Lake Estates · Pleasant Hill · Goodrich · Seven Oaks. All counties: Texas county list.