trinityboringsolutions.com

Roma Texas Directional Boring: Copita Soil, US 83 and Arroyo Roma

Quick Answer: Copita fine sandy loam can hold a bore open, and we do directional boring, also called horizontal directional drilling (HDD), in Roma, Texas for routes beneath US 83. The Yukon, Oklahoma main office is 728 road miles from Grant Street, so mobilization is part of planning. At about 40 inches, the USDA soil survey maps clay and weathered bedrock, which can change the reaming plan. Arroyo Roma crossings need a route planned around the channel.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Roma bores at a glance

  • Incorporated city in Starr County, Texas. Population 11,635 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 728 miles, about 14.3 hours of driving.
  • Ground: Copita soil is mapped on 30 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 31 percent of the area.
  • Highways inside the boundary: US 83, FM 650 and Spur 200. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Arroyo Roma.
  • Public water: City of Roma, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring on Grant Street in Roma?

We take directional boring work in Roma, Starr County, where the Census Bureau Vintage 2024 estimate puts the population at 11,635. Along Grant Street, we can bore water, sewer, gas, electric conduit or fiber routes beneath pavement and driveways rather than trenching through them. The line type, route and existing utilities shape the bore plan.

Our main office is in Yukon, Oklahoma, and Roma work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has done directional boring since 1982; Roma is 728 road miles from our Yukon main office. Our record of no utility strike in over 25 years matters when planning around City of Roma water lines or electric service reported in Starr County.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does a bore meet in Roma near Copita soil?

Copita soil is the largest mapped series in Roma, covering 30 percent of the city area; its mapped unit is Copita fine sandy loam, 0 to 3 percent slopes. The USDA soil survey also maps Lagloria, Jimenez and Reynosa soils. At about 40 inches, bedrock is mapped across 30 percent, silt loam across 14 percent, variable texture across 13 percent and silty clay loam across 11 percent. Average clay content at that depth is 26 percent, and sandy ground is not mapped there. Clay can grip the pipe, while silt needs controlled fluid.

USDA soil survey, inside the Roma city limitsWhat is mapped
Soil series mappedCopita 30 percent, Lagloria 14 percent, Jimenez 13 percent, Reynosa 11 percent and Rio Grande 7 percent
Texture at the surfacefine sandy loam 30 percent, silt loam 24 percent and very gravelly loam 13 percent
Texture about 40 inches downbedrock 30 percent, silt loam 14 percent and variable 13 percent
Engineering class about 40 inches downlean clay (CL) 27 percent, silty clay (CL ML) 14 percent and fat clay (CH) 11 percent
Average clay content about 40 inches down26 percent
Bedrock mapped within 60 inches31 percent of the area (0 percent hard rock, 31 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils20 percent of the area
High corrosion risk for uncoated steel63 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 31 percent of Roma, with a typical depth of 37 inches; hard bedrock is not mapped at that depth. That calls for slower drilling where the route meets rock. No seasonal water table is mapped within 60 inches, while flood prone soils cover 20 percent, so Arroyo Roma still needs channel specific planning. High steel corrosion risk is mapped across 63 percent, a concern for uncoated steel casing or tracer wire. The Jackson Group, an Eocene unit of mostly sandstone with lesser clay, can mean a slower bore where rock is encountered.

How do we run a bore through Roma bedrock and soil?

In Roma, we match the drill and fluid plan to the mapped mix of Copita soil, clay and weathered bedrock. A route near Arroyo Roma also needs channel depth planned before drilling starts.

  1. Copita fine sandy loam and mapped clay can hold an open hole, so we use thinner fluid, ream in stages and pull pipe while the hole is ready.
  2. At silt loam or silty clay loam near Grant Street, we keep fluid pressure low under pavement and watch steering as the ground gets wet.
  3. Where the USDA survey maps weathered bedrock in Roma, we expect slower progress and track the drill head through the soil to rock transition.
  4. For an Arroyo Roma route, we plan depth beneath the channel and check marked utilities with hydrovac potholes before the drill approaches.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What might a new line cross in Roma near US 83?

US 83 runs 9.1 roadway miles inside Roma, with FM 650 and Spur 200 also inside the city limits. A bore beneath existing highway pavement uses boring or tunneling rather than an open cut. Grant Street is the longest named street at 6.84 miles, followed by Ebony Avenue at 1.6 miles and Estrella Street at 1.53 miles. Athens Street runs 1.46 miles. Those streets give a route several possible pavement and driveway crossings to account for.

CrossingTypeMapped extentWho has a say
US 83US highway9.1 roadway miles insideState highway office
FM 650State highway0.2 roadway miles insideState highway office
Spur 200State highway0.1 roadway miles insideState highway office
Arroyo RomaStream2.77 channel miles insideChecked for Corps of Engineers jurisdiction
Arroyo Los MorenosStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Los Negros CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Arroyo GrandeStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Ramirez CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Roma or within 1 mile outside its limits, so the mapped routes do not show a track crossing. Arroyo Roma runs 2.77 channel miles through the city, and mapped streets cross named streams at six locations. There are no lakes or ponds mapped within 1 mile. A proposed Arroyo Roma crossing needs depth and alignment planned around the channel, with U.S. Army Corps of Engineers jurisdiction checked during planning.

Do I need a permit for a Roma bore in Starr County?

For a bore beneath US 83, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Pharr District reviews it; we prepare the bore plan and profile for the owner’s application. TxDOT cover requirements set the starting depth: electric and communication lines need 60 inches below the lowest crossed grade, water needs 60 inches, and pressurized sewer needs 60 inches. The permit can set another depth. Roma is incorporated, so its city streets, including Grant Street, belong to the city. Arroyo Roma is checked for Corps jurisdiction during planning, and no railroad crossing is mapped in Roma.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Roma water system?

The City of Roma public water system uses surface water and reports 7,009 service connections serving 19,464 people, so a route near Grant Street needs the existing water line located before drilling. Electric service reported in Starr County includes AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative. Before planning an electric conduit bore near Grant Street, we confirm the line owner for that specific address.

Line ownerWhat it isSourceSize
City of RomaPublic water systemSurface water7,009 connections, 19,464 people served
AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric CooperativeElectric utilities reporting service in Starr CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Roma’s median housing year at 1990; 6 percent of homes were built before 1960, 65 percent from 1960 to 1999 and 29 percent in 2000 or later. That mix can mean either replacement work or a new service along Athens Street. Near Ebony Avenue, we hydrovac pothole every marked utility on the bore path before drilling near it. For a proposed line beneath Grant Street, the marked utility is exposed before the drill approaches because paint shows position, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

How far is Roma from Evergreen and Trinity’s Yukon yard?

Roma is in Starr County, covers 5.86 square miles and sits at an elevation of 230 feet. In Starr County, we confirm ZIP code 78584 serves Roma before planning underground work there. Evergreen is 1.4 miles northwest, while Loma Vista is 1.4 miles east and J.F. Villareal is 1.6 miles east. Rio Grande City, the county seat, is 11.5 miles east; Mission is 44.5 miles east. The Yukon, Oklahoma main office is 728 road miles away, a 14.3 hour drive, so distance affects crew mobilization for a bore near US 83.

Places near Roma

  • Loma Vista: 1.4 miles east
  • Evergreen: 1.4 miles northwest
  • J.F. Villareal: 1.6 miles east
  • Fronton Ranchettes: 1.6 miles northwest
  • Mesquite: 1.7 miles southeast
  • Directional boring in Mission: 44.5 miles east

What kinds of bores come up in Roma near Arroyo Roma?

  • Highway crossing: A route beneath US 83 needs a bore plan that accounts for the highway pavement and the required cover.
  • Water service: A new connection near the City of Roma system needs its route checked against existing surface water lines.
  • Fiber conduit: Grant Street pavement can stay uncut while a conduit bore passes beneath the roadway.
  • Creek crossing: A line beneath Arroyo Roma needs channel depth planning and a check for Corps jurisdiction.
  • Street service: Athens Street driveway and pavement crossings can be handled with pits on each side of the bore.
  • Electric conduit: Before a route near US 83 is planned, we confirm the electric line owner for that address.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for directional boring in Roma near Athens Street?

For a quote on Athens Street, start with the address or a map pin, then tell us what is going in the ground. Give the pipe or conduit size and the footage. A sketch or plans help show how the route meets Grant Street pavement, nearby utilities or a driveway.

Ground affects the work: Copita fine sandy loam, clay and weathered bedrock can call for different reaming and fluid plans. Crossings matter too, including US 83 pavement, Arroyo Roma drainage and utilities exposed along Grant Street. The route length, pipe size, pits, excavator time, sand backfill and pavement all shape the scope. Mobilization from the Yukon office also matters for Roma, 728 road miles away. High profile or emergency work near Arroyo Los Morenos can add planning needs before we set a boring schedule.

Questions people ask about boring in Roma

Does Trinity Boring Solutions take directional boring work in Starr County near Roma?

Yes, we take directional boring work in Roma and across Texas. Our own crews and satellite yards operated by vetted partner drilling contractors can staff Roma work, with Trinity staying involved from the first call through the bore log. That applies to a route near Grant Street or another location in Starr County.

Does Copita soil in Roma pose a corrosion concern for steel pipe?

The USDA soil survey maps high steel corrosion risk across 63 percent of Roma, so uncoated steel casing or tracer wire needs consideration. The line owner selects any coating. With Copita soil in Roma, we account for the fact that HDPE does not share that steel corrosion concern. Copita fine sandy loam is the most widespread mapped soil series, but a site specific route still needs its own review.

What ground does a directional bore pass through near Copita soil in Roma?

The USDA soil survey maps Copita fine sandy loam across 30 percent of Roma. At about 40 inches, bedrock is mapped across 30 percent of the area, with silt loam across 14 percent and silty clay loam across 11 percent. Average clay content at that depth is 26 percent, which can make reaming and pipe pull more demanding.

Is there rock within five feet of the surface in Roma?

Weathered bedrock is mapped within 60 inches across 31 percent of Roma, at a typical depth of 37 inches. Roma’s fine sandy loam surface soil is part of our depth planning, while hard bedrock is not mapped within that depth. The Jackson Group underlies the area and includes mostly sandstone, so a route can slow where it meets rock even when the soil map shows weathered material.

Who at TxDOT Pharr District approves a bore under US 83 in Roma?

The utility owner applies for the TxDOT utility permit in RULIS, and the TxDOT Pharr District reviews the application for US 83. We provide the bore plan and profile for the owner’s filing. A water line crossing needs 60 inches of cover under TxDOT’s stated rule, though the permit can specify another depth.

Can a line be bored beneath Arroyo Roma in Roma?

A line can be planned beneath Arroyo Roma, which runs 2.77 channel miles within Roma. The route needs depth planning under the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The six mapped street crossings of named streams also make route selection important.

Does Roma’s distance from Yukon change a bore near Mission?

Roma is 728 road miles from the Yukon, Oklahoma main office, a 14.3 hour drive, so mobilization can affect the job scope. Mission is 44.5 miles east of Roma. We review the route, footage, soil and crossings together when planning work near either location.

How early should I request Texas811 marks for a Roma bore on Grant Street?

For a Grant Street bore, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For work near Arroyo Grande, we allow for the notice Texas811 describes as at least two working days. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the price of directional boring under US 83 in Roma?

The route details drive the price for a US 83 bore: length, pipe size, soil and rock, exposed utilities, pavement, crossing count, pits and excavator time all matter. Arroyo Roma drainage can add crossing work, while the 728 road miles from Yukon affect mobilization. High profile or emergency work can also change the planning scope.

Where the Roma facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Roma

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Roma, Texas

Type the address of your job in Roma. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Roma

Same county: Rio Grande City · Las Lomas · Escobares · La Grulla · Mikes · East Alto Bonito · Garza-Salinas II · West Alto Bonito · La Puerta · B and E · Mesquite · Valle Vista. All counties: Texas county list.