trinityboringsolutions.com

San Patricio Texas Directional Boring: Willacy Soil, FM 666 and Nueces River

Quick Answer: Before we bore beneath FM 666, the water provider for the address must be confirmed and electric line ownership checked; Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for San Patricio projects. The Yukon main office is 573 road miles away, which matters when planning a Main Street job and its mobilization. Willacy soil is common here, and clay at depth can stick to a reamer and grip pipe. A Nueces River route also needs careful crossing planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

San Patricio bores at a glance

  • Incorporated city in San Patricio County, Texas. Population 450 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 573 miles, about 11.3 hours of driving.
  • Ground: Willacy soil is mapped on 26 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 666. State permit office: TxDOT Corpus Christi District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Nueces River and Bell Camp Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles San Patricio boring near the Nueces River?

In San Patricio, the water provider for the address must be confirmed and electric line ownership checked before a bore; AEP Texas Central and San Patricio Electric Cooperative report electric service in the county. Trinity Boring Solutions takes directional boring work here. The Census Bureau Vintage 2024 estimate puts the city population at 450. We can place water, sewer, gas, electric conduit and fiber beneath Main Street, FM 666 or other routes after checking what lines are already there.

Our main office is in Yukon, Oklahoma, and San Patricio work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For FM 666 plans in San Patricio, we bring our family business history from 1965 and directional boring experience since 1982. For a service run off Main Street or a larger casing route near FM 666, our work ranges from 3/4 inch service lines to 48 inch casing.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should a bore expect in San Patricio near Willacy soil?

The USDA soil survey maps Willacy soil across 26% of San Patricio, with fine sandy loam, clay and clay loam among the surface textures. About 40 inches down, sandy clay loam covers 45% of the mapped area and clay covers 43%. The survey also maps 38% as fine sandy loam and 30% as clay at the surface. We use mapped Willacy, Aransas, Raymondville, and Victoria soil patterns as context, not as substitutes for test borings. The clay share matters because sticky cuttings can build on a reamer, while sandy ground can lose support behind the bit.

USDA soil survey, inside the San Patricio city limitsWhat is mapped
Soil series mappedWillacy 26 percent, Aransas 14 percent, Raymondville 13 percent, Victoria 12 percent and Pharr 8 percent
Texture at the surfacefine sandy loam 38 percent, clay 30 percent and clay loam 13 percent
Texture about 40 inches downsandy clay loam 45 percent, clay 43 percent and very gravelly loam 6 percent
Engineering class about 40 inches downlean clay (CL) 43 percent, fat clay (CH) 30 percent and clayey sand (SC) 19 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches19 percent of the area
Flood prone soils19 percent of the area
High corrosion risk for uncoated steel46 percent of the area

Bedrock is not mapped within 60 inches in San Patricio, but that does not establish conditions deeper down. Seasonal water tables are mapped within 60 inches across 19% of the area, and flood prone soils across 19%, so pits and creek approaches may need water control and a route below the channel. High steel corrosion risk is mapped across 46%, a concern for steel casing and tracer wire that the line owner should address. The geologic map shows Delta Sand and Silt of Pleistocene age, including sand, silt and clay.

How do we bore San Patricio sandy clay loam?

In San Patricio, the mapped sandy clay loam and clay call for controlled fluid and staged reaming. Along Main Street or near FM 666, we expose marked lines before the drill approaches them.

  1. Because San Patricio has mapped clay at depth, we use thinner drilling fluid with polymer and open the hole in stages to limit sticky buildup on the reamer.
  2. With heavy clay mapped here, we watch fluid returns near Main Street pavement and keep pressure controlled to reduce the chance of lifting the surface.
  3. The survey maps seasonal water tables within 60 inches across 19% of San Patricio, so we keep pits small and pump out water if they fill.
  4. At a Nueces River or Bell Camp Creek route, we plan below the channel, track the drill head from the surface and record depth and pitch.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

What might a new line cross in San Patricio near FM 666?

FM 666 runs 4.4 mapped roadway miles inside San Patricio, so a route in its right of way needs state review. Main Street is the longest named street at 5.38 miles; McGloin Street runs 1.65 miles, and Sundance Circle runs 0.97 miles. A bore beneath existing highway pavement uses boring or tunneling rather than an open cut. Street ownership and the proposed route matter too, especially where a line must pass beneath pavement or a driveway.

CrossingTypeMapped extentWho has a say
FM 666State highway4.4 roadway miles insideState highway office
Nueces RiverStream2.31 channel miles insideChecked for Corps of Engineers jurisdiction
Bell Camp CreekStream0.83 channel miles insideChecked for Corps of Engineers jurisdiction
Javelin CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Round LakeLake or pond33 acres, nearbyChecked for Corps of Engineers jurisdiction
Lilly LakeLake or pond18 acres, nearbyChecked for Corps of Engineers jurisdiction
Willow LakeLake or pond10 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside San Patricio or within 1 mile outside its limits, so there is no mapped track route to plan around. The Nueces River runs 2.31 channel miles in the city, and Bell Camp Creek runs 0.83 miles; public mapping shows two street crossings of named streams. Willow Lake is inside the limits, while Round Lake and Lilly Lake are within 1 mile outside them. A river, creek or lake crossing is checked for federal jurisdiction during planning.

Do I need a permit for a San Patricio County bore?

A bore in San Patricio County beneath FM 666 right of way needs a TxDOT utility permit, reviewed by the TxDOT Corpus Christi District. The utility owner, not the drilling contractor, files through TxDOT’s RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. For electric or communication lines crossing a highway, the stated cover is at least 60 inches below the lowest point of the crossed grade; along the right of way it is 48 inches. Water crossings need 60 inches of cover, and pressurized sewer crossings need 60 inches. On Main Street, we recognize San Patricio city streets as city owned when coordinating boring work. A Nueces River crossing is checked for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in San Patricio County?

The water provider for a specific San Patricio address has to be confirmed with the city, the county or the local water district before a bore is planned. Electric service reported in San Patricio County includes AEP Texas Central and San Patricio Electric Cooperative, but that does not identify the owner at every address. We confirm the line owner before planning conduit near Main Street, then expose marked utilities before drilling close to them.

Line ownerWhat it isSourceSize
AEP Texas Central and San Patricio Electric CooperativeElectric utilities reporting service in San Patricio CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put San Patricio’s median housing year at 1989: 14% of homes were built before 1960, 55% from 1960 to 1999 and 31% in 2000 or later. That mix can mean work on an older line or a newer service near Sundance Circle. We use hydrovac potholing to expose marked water and electric lines on the bore path; surface marks show position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What is near San Patricio and Sandy Hollow-Escondidas?

San Patricio is an incorporated city in San Patricio County, with 3.85 land square miles at an elevation of 108 feet and ZIP code 78368. Sandy Hollow-Escondidas is 4.3 miles southwest, Edroy is 6.0 miles east, Sandia is 6.5 miles northwest and Mathis is 7.9 miles north. Robstown, the nearest larger city, is 14.5 miles southeast; Sinton, the county seat, is 16.8 miles east. The Yukon yard is 573 road miles away, an 11.3 hour drive, which affects mobilization for work near FM 666.

Places near San Patricio

What could we bore in San Patricio near Sundance Circle?

  • Highway crossing: A route beneath FM 666 uses a bore or tunnel under existing pavement, with the line owner’s TxDOT permit in place.
  • Water service: We can route a service from a property to a connection near Main Street after confirming the address water provider and exposing marked lines.
  • Fiber conduit: A fiber route along Sundance Circle can pass below pavement without cutting the street, with the path checked for buried utilities.
  • Creek crossing: A Nueces River or Bell Camp Creek bore needs a planned channel approach and a check for U.S. Army Corps of Engineers jurisdiction.
  • Lake approach: Willow Lake lies inside San Patricio, so a nearby route can be planned around the lake edge and any marked utilities.
  • Airport service: A line route near San Patricio International Airport can be reviewed for its length, material and crossings before the bore plan is set.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a San Patricio bore near Main Street?

For a Main Street service, send the address or map pin, what the line will carry, its pipe or conduit size and the footage. A route sketch or plans help us see how the work relates to FM 666, nearby utilities or a Nueces River crossing. Those details give us a workable route to review before we price the job.

The 573 road miles from Yukon affect mobilization for a San Patricio job. Length and pipe size matter, as do the Willacy soil and clay mapped at depth, the utilities that must be exposed, and any concrete or pavement along FM 666. A Nueces River crossing can add planning, while pits, excavator time and sand backfill also shape the scope. High profile or emergency work can call for a different plan.

Questions people ask about boring in San Patricio

Does Trinity take directional boring work in San Patricio County, and who staffs it?

Yes, Trinity Boring Solutions takes directional boring work in San Patricio County. Our Yukon based team coordinates the project, whether our own crews or crews from a vetted partner contractor are on site. For a route near FM 666, you work with Trinity from the initial call through the bore log.

What is Willacy soil like for a bore in San Patricio?

Willacy is the most common mapped soil series in San Patricio at 26%. At about 40 inches, the USDA soil survey maps sandy clay loam across 45% of the area and clay across 43%. Clay can stick to the reamer, so fluid control and staged reaming matter along routes such as Main Street.

Will a San Patricio bore hit rock below Main Street?

Bedrock is not mapped within 60 inches in San Patricio, but that does not rule out rock at greater depth. The geologic map shows Pleistocene Delta Sand and Silt, with sand, silt and clay. We use those mapped conditions to plan, but the map is not a site specific drilling test for a Main Street route.

Who approves a bore under FM 666 in San Patricio?

The utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Corpus Christi District reviews work on FM 666. For permit planning in San Patricio County, we provide the bore plan and profile for the owner’s application through TxDOT Corpus Christi District. The permit sets the approved route and may require cover depths different from the standard values.

Can a line be bored under the Nueces River in San Patricio?

A line can be planned beneath the Nueces River, which has 2.31 channel miles inside San Patricio. The route needs to stay below the channel, and its crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Ground and access at the proposed approach also shape the bore plan.

Which electric company owns lines at a San Patricio County address?

AEP Texas Central and San Patricio Electric Cooperative report electric service in San Patricio County, but the owner at a specific address must be confirmed. Before placing conduit near Main Street, we verify the line owner and have marked utilities exposed so the drill path can account for their actual position.

How far is San Patricio from Yukon, and does Robstown affect the job?

San Patricio is 573 road miles from the Yukon yard, an 11.3 hour drive. Robstown is 14.5 miles southeast, but it does not change the distance from our main office. Mobilization is part of planning for work near FM 666, along with the bore length and route conditions.

How much notice does Texas811 need for a San Patricio bore on Main Street?

For a Main Street excavation, Texas law requires a locate request at least 48 hours before work starts, not counting weekends and legal holidays, and no earlier than 14 days before the start. With San Patricio 573 road miles from our Yukon main office, we submit a new request if the start slips more than 14 days past the original notice. Before we continue a crossing near Bell Camp Creek, we have worn or moved marks refreshed through Texas811.

What affects the cost of a directional bore under FM 666 in San Patricio?

The job scope determines the price for an FM 666 bore. Length, pipe or conduit size, Willacy soil conditions, exposed utilities, pavement, creek crossings, pits and excavator time all matter. Mobilization from the Yukon office is another consideration for San Patricio, as are sand backfill and high profile or emergency work.

Where the San Patricio facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in San Patricio

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in San Patricio, Texas

Type the address of your job in San Patricio. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for San Patricio

Same county: Portland · Ingleside · Aransas Pass · Sinton · Taft · Odem · Gregory · Taft Southwest · Ingleside on the Bay · St. Paul · Lakeshore Gardens-Hidden Acres · Lake City. All counties: Texas county list.