Stillwater, Oklahoma · Licensed and Insured · Since 1965
Directional Boring and Road Bore Contractor in Stillwater, Oklahoma
For directional boring and road bores in Stillwater, Oklahoma, call Trinity Boring Solutions Inc. for water, sewer, natural gas and propane lines, electric conduit and fiber. Our family has owned the company since 1965 and worked in underground construction since 1982. Our own crews and rigs come from 9102 Northwest Expy, Yukon, OK 73099, and we answer (405) 409-7423 around the clock.
A bore can connect utilities without cutting the main surface between the pits. If your crossing is on a busy street or near a campus entrance, show both connection points and tell us when access has to stay open.
Before staking the route, confirm the point where the new line will connect and who owns the ground around it. If you need to go over the crossing with our crew, call (405) 409-7423.
Trinity Boring Solutions at a glance
Serves Stillwater. Stillwater City Hall is about 71 road miles and 1 hour 20 minutes from 9102 Northwest Expy, Yukon, OK 73099 before traffic.
Since 1965. Family owned. Dean Rice started the company in 1965 as an irrigation contractor, and it has done underground construction since 1982. Today Trinity is a directional boring contractor serving Oklahoma and Texas.
Oklahoma City metro based. Headquartered at 9102 Northwest Expy, Yukon, OK 73099, in the Oklahoma City metro. Crews and rigs cover all 77 Oklahoma counties and all of Texas, from Dallas, Fort Worth and Plano down to Houston. Jobs within about four hours of Yukon can have a crew the same day.
Owns its equipment. Vermeer and Ditch Witch HDD rigs, auger boring machines and hydrovac trucks, all owned outright and run by Trinity operators.
One crew, whole job. 811 locates and hydrovac potholing, horizontal directional drilling, auger boring with steel casing, trenching, backfill and pit restoration from the same company, so there is no handoff between a locator, a driller and an excavator.
Range. 3/4 inch service lines to 48 inch pipe, and bores from 10 feet to just under 4,000 feet in a single shot, with longer runs bored in sections, for water, sewer, natural gas and propane, electric and fiber.
Safety. An Okie811 ticket in Oklahoma, a Texas811 ticket in Texas, and hydrovac potholing on every crossing.
24 hour phone.(405) 409-7423 is answered around the clock, with emergency crews for gas and water lines.
Pipe and quoting. We install HDPE for water. Sewer pipe is job specified PVC. How a bore is priced.
Utility work near campus, neighborhoods and open ground
Stillwater is in Payne County and home to Oklahoma State University. The approach to a campus or downtown crossing may be different from the approach to an open parcel. When campus or business access is part of the plan, mark the entrances that must stay usable while the rig is set up.
At a developed site, a new main or service can often pass under the pavement with pits on either side. In open ground, trenching may leave more room for the crew to see the pipe or check grade. We can quote either method or divide the work into sections.
Do not assume a line crossing is clear just because an old drawing shows open space. Compare the approved layout, the locate responses and the actual lines exposed at relevant crossings before drilling.
Need directional boring contractors in Stillwater, OK who answer the phone 24/7? Call (405) 409-7423.
What Directional Boring Is and Why Stillwater Projects Use It
Directional boring, also called horizontal directional drilling or HDD, is a trenchless method for installing
underground utilities without digging a long open trench. Instead of cutting a continuous slot across the ground,
the crew drills a small, steerable pilot hole along a planned path from an entry pit to an exit pit. The hole is
then enlarged, and the new pipe or conduit is pulled back through it. For property owners and project managers in
Stillwater, that means a new water, sewer, gas, electric, or fiber line can cross a street, driveway, creek, or
finished landscape while the surface above stays almost untouched.
The process has three basic stages. First, the pilot bore: a drill head with a transmitter is steered along the
designed line and grade while a locator on the surface tracks its exact depth and position. Second, pre-reaming:
a reamer is pulled back through the pilot hole to widen it to the size needed for the product pipe. Third, pullback:
the new HDPE, steel, or conduit pipe is connected behind the reamer and pulled into place in one continuous run. A
bentonite or polymer drilling fluid cools the tooling, carries cuttings out of the hole, and stabilizes the bore so
it does not collapse.
Choose the installation method by what has to remain in place. For a road crossing, the comparison includes pit access and the cover the road authority wants, not just the length of pavement.
Where trenchless work can fit in Stillwater
New and replacement water and sewer lines that must cross streets, driveways, and crowded utility corridors.
Fiber and telecom builds: backbone routes, laterals, and business drops across Stillwater neighborhoods and commercial corridors.
Primary and secondary electric, site lighting, and light-pole circuits for shopping centers, schools, and industrial yards.
Irrigation mains and control wire for parks, medians, athletic fields, and large HOA common areas.
Long driveway and acreage crossings to shops, barns, and outbuildings without a trench scar across the whole property.
An electric or fiber route can cross a paved entrance with a bore and continue in open ground beyond it. For gravity sewer or storm work, verify the connection elevations before deciding whether a trenchless route can hold the specified slope.
For a plan that blends directional boring, trenching, and hydro-vac on one Stillwater project, call now.
HDD, Trenching, or Hydro-Vac: How We Choose for Your Stillwater Site
Think about work space as well as the line on the plan. The method that fits an open lot may not fit a crossing with limited access behind the curb.
When directional boring wins
Directional drilling can take a pipe below pavement or a driveway without opening a continuous trench. Show where the rig can set up, where the pit can fit and what else crosses the proposed path.
When trenching wins
An open trench may make sense where there is space alongside the route and the crossing does not cut an important surface. Some projects use a bore only beneath the pavement and a trench beyond it.
When hydro-vac wins
Hydrovac removes soil with water and suction to expose an existing line where the bore will pass. Physical exposure gives the crew information a paint mark alone does not supply, including the actual location and depth at that point.
Directional Boring Contractors in Stillwater, OK: Full Service List
Here is how our HDD, trenching, and hydro-vac crews cover everything from one house service to full city and commercial utility builds across Stillwater.
Water and Sewer Lines
HDD and trenching for individual services and large mains: domestic water, fire lines, gravity sewer, force mains, and storm drains that must maintain grade across streets, alleys, and long drives.
Directional boring and trenching for gas services, primary and secondary electric, generator feeds, and site-lighting circuits serving shops, schools, commercial sites, and industrial yards.
Multi-duct telecom and fiber conduit banks, ISP and municipal fiber backbones, business and school laterals, and low-voltage conduits installed via HDD, trenching, and hydro-vac as needed.
Hydro-vac daylighting and potholing to expose existing utilities, soft-dig around critical lines, and narrow slot trenching in congested or sensitive areas where a trencher is too risky.
If a project mixes ditches, pavement and open space, send the utility plan and mark where each condition changes. We can quote the work shown on the approved profile.
How a directional bore is planned and installed in Stillwater
A clean bore is the result of planning, locating, and disciplined execution, not luck. Here is what a typical
Stillwater directional boring project looks like from your first call to final tie-in.
Scope the work. Share the address, utility plans, connections and the surface you need to keep open. If a main has failed, tell us whether the area is cleared for work.
Verify existing lines. Confirm the locate ticket and any private utility locating. Trinity uses hydrovac potholes where it needs to see what the new route will cross.
Confirm approvals. The customer or general contractor pulls the permits and handles traffic control. Trinity uses the approved route and profile.
Drill the pilot. Follow the approved alignment and check the drill head location as work progresses.
Prepare the hole and pull the product. Enlarge the pilot hole as needed for the pipe or conduit called for in the plans.
Finish the agreed scope. Handle backfill and pit restoration as specified in the quote. Check who is responsible for final utility connections and testing.
What Affects the Cost and Timeline of a Stillwater Boring Job
The most common question we get is simple: what will it cost and how long will it take? Every Stillwater job is
different, but the price and schedule come down to a handful of factors. Knowing them up front helps you plan a
realistic budget instead of guessing.
Distance and diameter. A short service bore to a single house is very different from a long
large-diameter mainline crossing. Longer bores and bigger pipe take more time, more drilling fluid, and heavier
tooling.
Soil and ground conditions. Known rock, buried debris, wet fill or groundwater may call for different equipment or access measures.
Crossing type. A state highway, driveway and drainage channel can have different profiles, clearances and work space.
Existing utilities. Extra crossings can mean more potholes and more planning around the approved clearances.
Permits and inspections. Let us know whether approvals are in place and what inspections or work windows are specified.
Access and restoration. Pit and rig access, space to stage pipe and the specified restoration all affect the scope.
Send the crossing information for a lump sum quote. If the pipe size is known but the pit locations are not, say which side has room to set up and what the job has to preserve.
For a straight answer on your Stillwater job, call (405) 409-7423 and describe the crossing.
Equipment Our Stillwater Crews Run
A short conduit bore and a large water crossing can call for very different rigs. Trinity runs a Vermeer D24x40 and a Vermeer D100x140, its largest rig with 100,000 pounds of pullback. Equipment choice follows the pipe, the ground and available access.
Horizontal directional drill rigs sized for short residential shots up through long mainline crossings, with mud-mixing systems for clean cuttings control.
Walk-over and wireline locating so we track the drill head depth and pitch in real time and keep the bore on the planned profile.
Hydro-vac trucks for potholing, daylighting existing utilities, and cleaning up entry and exit pits without hand-digging blind.
Trenchers and excavators for open-ground runs, tie-ins, and pits where trenching is simply faster and cheaper than boring.
Pipe and conduit handling for HDPE fusion, steel, and multi-duct conduit so the product pipe goes in clean behind the reamer.
Not sure which method your Stillwater job needs? Call (405) 409-7423 and we will walk the site with you.
Directional Boring Service Area Map: Stillwater, Oklahoma
The ODOT Stillwater city map shows US 177, State Highway 51, the Cimarron Turnpike and Boomer Lake. Nearby Payne County communities include Perkins and Glencoe. The city has a Boomer Creek drainage plan that identifies the subwatershed; for a site near the creek, check drainage before placing pits or equipment. Our team uses an Oklahoma 811 (Call Okie) ticket and hydrovac potholing before crossing existing lines.
Load Service Area MapOpen the map to view our directional boring service area in Stillwater and Payne County, Oklahoma.
What We Need to Quote Any Stillwater Utility Job
Send the project address and intersection, and mark any entrance, easement or lane that needs to stay open.
Identify the utility, pipe size and material, and number of conduits or lines.
Show the ends, measured length and required depth, cover or slope.
Flag known rock or water and show how the rig, pipe and entry and exit pits can fit.
Attach plans or photos and tell us the work window, permit status and locate ticket status.
For a detailed plan, directional boring contractors in Stillwater, OK are a quick call away at (405) 409-7423.
We believe in safe, permitted, well-located work. These outside resources cover dig-safe rules, trenchless methods, and local data that matter for any directional boring project in Stillwater, Oklahoma.
Stillwater public way permits, utilities and ground
The city applications page lists a Public Way Permit and a Public Way Emergency Permit. For work by a state route, confirm the exact crossing and road authority with ODOT Field District 4. A turnpike crossing may involve the Oklahoma Turnpike Authority instead. The customer or general contractor obtains permits and handles traffic control; Trinity drills to the approved plan.
The City of Stillwater Utilities provides electric, water and wastewater service. Confirm which facilities are at the exact address and check the owner of any gas, fiber or private line. For a normal request, the OKIE811 excavator guide says to give at least 48 hours of notice, excluding the notification day, weekends and legal holidays. The request is free and does not cover every private line.
The Oklahoma Geological Survey regional guide describes red shale and mudstone with sandstone lenses in Payne County. It does not establish rock depth along a Stillwater bore. Compare USDA Web Soil Survey mapping with any test pits or geotechnical logs for your site.
Directional Boring Contractors in Stillwater, OK: Common Questions
What is the difference between directional boring and open cut trenching in Stillwater?
A bore installs pipe or conduit below a surface without opening the full route. Trenching opens the ground along the pipe so the crew can see it as it goes in. Under pavement near a busy entrance, consider a bore; for open ground with good access, compare whether a trench fits better.
Can you install utilities in Stillwater without cutting up the road?
Often, yes. If the road authority approves the bore and there is space to work on both sides, we can install the product below pavement without cutting across the travel lanes. A bore does not automatically eliminate lane controls or inspections. Show the exact crossing, pit space and traffic restrictions.
How deep do you bore utility lines in Stillwater?
The depth comes from the product, approved profile and clearances from existing facilities. A dry conduit crossing does not get the same profile as a gravity line that needs a steady slope. Send the road detail or connection elevations; we use the depth shown on the approved plan.
How much does directional boring cost in Stillwater, Oklahoma?
We quote the crossing as a lump sum. A short line may still need several potholes or have limited room next to a campus entrance. Length, product size, rock, water, access and restoration all affect the scope. Send the drawings and the road authority requirements for the actual crossing.
How long does a typical Stillwater bore take?
We estimate time after we know the route, access, pipe size and any restrictions on when work can occur. A driveway with open ground on both sides is different from a connection near a campus gate or a highway. Permit and locate readiness also affect when the crew can start.
Do you handle both residential services and larger commercial and municipal jobs in Stillwater?
Yes. We can look at one house service or a larger utility run with several crossings. For a commercial or municipal project, send the profile, trenchless details and the product specification. For a house line, photos of the approaches and the two connections are a useful place to start.
When do you use directional drilling, trenching or hydrovac on a Stillwater job?
Directional drilling often fits below a surface that needs to remain. Trenching may fit in open ground where the work zone can move with the pipe. Hydrovac lets the crew inspect a buried utility at a conflict point. These methods can be used on different pieces of one route.
Can you locate and avoid existing utilities around Stillwater?
Begin with an OKIE811 ticket and check each response. A line owned by the property owner, such as a feed from one building to another, may need separate locating. At crossings, hydrovac potholes let the crew verify the line and check clearance before the bore goes past it.
Do I need a permit to bore under a street in Stillwater?
Ask the city about its Public Way Permit for a proposed crossing on a Stillwater street. For a state road or a turnpike, verify which authority controls the specific segment. The customer or general contractor secures the required permit and arranges traffic control. Trinity uses the approved plan.
What soil and ground conditions do you deal with in Stillwater?
Regional mapping around Payne County describes shale, mudstone and sandstone. That does not tell us which material will be at the planned bore elevation. If pits are near Boomer Creek or another drainage path, send any ground logs, groundwater observations and the available access on each side.
Can you keep grade on gravity sewer and storm bores in Stillwater?
Only if the route, product and method can meet the approved slope and tolerances. Send the upstream and downstream elevations before choosing the method. If there is little fall between the tie points, flag that early so we can discuss whether directional drilling is appropriate for the plan.
Can you help with full fiber builds or multiple ducts in Stillwater?
Yes. We can quote conduit for a single fiber drop or a bank with multiple ducts. Show vault locations, road crossings and where the conduits must change direction. If the route also carries power, send the approved separation requirements and show the work space at each end.
Will boring damage my driveway, lawn, or landscaping?
Boring can avoid a continuous cut across a driveway or lawn, but it is not a promise of zero disturbance. The rig and pits still need room. Show the surface to protect, sprinkler locations and the access route so we can talk through where the work will take place.
Are you licensed and insured for work in Stillwater?
Yes. Trinity Boring Solutions is licensed and insured. We carry the coverage required for residential, commercial, and municipal bores in Stillwater and across Payne County. For a specific project, send the contract requirements and let us know what paperwork the project owner requests.
How fast can you get a crew to Stillwater for an emergency?
Stillwater is within our same day service area, and the Yukon phone is answered around the clock. Call (405) 409-7423 to confirm whether a crew can respond and share the crossing, utility owner and locate status. For a suspected gas leak, move away and call the utility or emergency services first.
How do I get a quote for directional boring contractors in Stillwater, OK?
Call (405) 409-7423 or use the project form. Send the address, pipe material and size, bore length, the depth or slope on the plan, and photos of where we can set up. Let us know whether local approvals and utility locates are ready.
Is 811 free for a Stillwater utility bore?
The ticket is free. OKIE811 sends the notice to its members, who respond about the lines they own. A private service from a meter to a building or a privately installed irrigation pipe may not be covered. Read the ticket responses and arrange a private locate if the route needs it.
What is the difference between jack and bore and directional drilling near State Highway 51?
Jack and bore advances a casing from a pit with an auger taking soil out. Directional drilling steers a pilot hole and pulls pipe or conduit through it. At a State Highway 51 crossing, check the approvals, required casing, grade and room for pits before committing to one method.
How deep are buried utilities near a Stillwater road crossing?
Buried utility depth varies with the original installation and changes in pavement, ditch grade or landscaping. A surface mark is not proof of depth. Before the new line crosses a marked facility, the crew can expose the facility to verify its elevation against the approved bore profile.
Does 811 cover private pipe locating in Stillwater?
Not necessarily. OKIE811 notifies its member operators about the excavation, and they respond for their facilities. A private line, such as a feed between buildings, may need its own locate. Bring any property drawings and ask the owner what was installed after the utility connection.
Do I need a permit to replace a sewer line near Boomer Creek?
Ask the city about the work location, proposed connection and whether it enters a public way or a regulated drainage area. The answer depends on the actual site, not just the fact that a creek is nearby. The customer or general contractor checks approvals before the crew schedules the crossing.
Get a Directional Boring Quote in Stillwater, Oklahoma
Send the route and product details and flag any road authority approval that is pending. We answer at the Yukon office any time, so tell us whether the crossing is a planned project or an urgent water or gas bore.
Use the bore planner for the approximate route, then send the project drawing if it shows the approved depth or grade. For a crossing near a stream or public street, identify who is responsible for the plan and traffic control before choosing work dates. For a bore quote, call (405) 409-7423.
Free Bore Planner
Plan Your Bore in Stillwater, Oklahoma
Type the address of your job in Stillwater. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to just under 4,000 feet in a single shot, with longer runs bored in sections, 3/4 inch service line through 48 inch pipe, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Trinity Boring Solutions also provides directional boring and underground utility services near Stillwater in: Cushing · Perkins. Call (405) 409-7423 for a quote.