Alto Bonito Heights Texas Directional Boring: McAllen Soil, FM 2360 and Salado Creek
Quick Answer: Saenz Street, Las Palmas Drive and Palma Street are the longest named streets, and FM 2360 runs through the mapped community; we provide directional boring, also called horizontal directional drilling (HDD), for routes beneath these roads. From our Yukon, Oklahoma main office, Alto Bonito Heights is 732 road miles away, so a job near FM 2360 needs mobilization planned with the route. USDA maps McAllen fine sandy loam at the surface and sandy clay loam around 40 inches down; its clay can cling to tooling, so reaming and fluid control matter.
Alto Bonito Heights bores at a glance
- Unincorporated community in Starr County, Texas. Population 296 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 732 miles, about 14.3 hours of driving.
- Ground: McAllen soil is mapped on 100 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 2360. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Alto Bonito Heights near Salado Creek?
We take directional boring work in Alto Bonito Heights, Starr County, where the 2020 Census counted 296 residents in this unincorporated community. Saenz Street, Las Palmas Drive and Palma Street are the longest named streets, and FM 2360 runs through the mapped community. We can bore water, sewer, gas, electric conduit and fiber routes beneath those roads or between properties, with each route planned for its actual crossings.
Our main office is in Yukon, Oklahoma, and Alto Bonito Heights work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. At the small end, we handle 3/4 inch service lines; at the large end, 48 inch casing and bore lengths from 10 feet to 5,000 feet. Our family business began in 1965, and we have done directional boring since 1982, including planning routes near FM 2360.

What ground does Alto Bonito Heights have in McAllen soil?
Alto Bonito Heights is mapped as McAllen fine sandy loam across 100 percent of its area, according to the USDA soil survey. The surface texture is fine sandy loam, while the mapped texture at about 40 inches is sandy clay loam, classified as CL. The survey gives an average clay content of 26 percent at that depth. These are mapped soil patterns, not test borings, so the actual route still needs to be judged as drilling proceeds. Clay in the mix can stick to tooling and grip pipe, which affects fluid and reaming choices.
| USDA soil survey, inside the Alto Bonito Heights mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | McAllen 100 percent |
| Texture at the surface | fine sandy loam 100 percent |
| Texture about 40 inches down | sandy clay loam 100 percent |
| Engineering class about 40 inches down | lean clay (CL) 100 percent |
| Average clay content about 40 inches down | 26 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
Bedrock is not mapped in the top five feet of Alto Bonito Heights, and seasonal water table, flood prone soils and high steel corrosion risk are not mapped in the survey. That does not rule out deeper rock. The geology map shows Goliad Formation, undivided, of Cenozoic age, and Goliad Formation of Miocene age, with clay, sand, sandstone, marl, caliche, limestone and conglomerate. The mapped clay loam calls for controlled fluid and staged reaming; if harder material appears deeper down, the drilling approach may need to change.
How do we bore Alto Bonito Heights sandy clay loam?
We bore Alto Bonito Heights sandy clay loam with controlled fluid and staged reaming, then track the drill beneath Saenz Street or along the selected route. The McAllen soil mapping guides the plan, but conditions can vary underground.
- In McAllen sandy clay loam, we use controlled drilling fluid and staged reaming to manage sticky clay that can build on tooling and grip the pipe.
- Before drilling near a marked utility along Saenz Street, we use hydrovac potholing to expose it; paint shows its position, not its depth.
- We track the drill head from the surface along the planned Las Palmas Drive route and log depth and pitch as the bore advances.
- We lay out the pipe before the final ream and pull it through the McAllen soil the same day the hole is opened, reducing the chance of a clay grip.

Which roads and creeks could a bore cross in Alto Bonito Heights near FM 2360?
FM 2360 is the state highway running through Alto Bonito Heights, with 0.4 mapped roadway miles inside the community; US 83 is 0.4 miles outside the mapped boundary. Saenz Street, Las Palmas Drive and Palma Street each have 0.27 miles mapped inside the community. Diaz Street adds another named route. A bore beneath FM 2360 has to be planned for the highway right of way, while a route under a local street can avoid cutting its surface if the plan and access allow.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 2360 | State highway | 0.4 roadway miles inside | State highway office |
| US 83 | Highway nearby | 0.4 miles outside | State highway office |
| Salado Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad tracks are mapped inside Alto Bonito Heights or within 1 mile outside it, and no street and rail crossings are mapped in the community. Salado Creek is 0.9 miles from the mapped boundary; no named stream runs inside the community, and no street crossing of a named stream is mapped there. There are no lakes or ponds mapped within 1 mile. A proposed creek route still needs its channel and jurisdiction considered during planning.
Who approves a bore in Alto Bonito Heights in Starr County?
Alto Bonito Heights is unincorporated, so it has no city government to approve street work; authority for streets rests with the county or state, depending on the road. For work in the FM 2360 right of way, the line owner, not the driller, files a utility permit in TxDOT’s online RULIS system, and the TxDOT Pharr District reviews it. We prepare the bore plan and profile for the owner and work under its permit. TxDOT cover rules set crossing depths of 60 inches for electric, communication and water lines and pressurized sewer, with different depths along the right of way. A Salado Creek crossing is checked for federal waterway jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose utility lines serve Alto Bonito Heights in Starr County?
The water provider for a specific Alto Bonito Heights address must be confirmed with the county or local water district before a bore is planned. EPA drinking water records do not match a system to this community by name, so the address needs to be checked directly. AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative report electric service in Starr County; we confirm the line owner for the address before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative | Electric utilities reporting service in Starr County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put the median housing year in Alto Bonito Heights at 1983. The estimates show 79 percent of housing units built from 1960 to 1999 and 21 percent built in 2000 or later. Housing age does not establish the age of buried lines, but replacement work along Las Palmas Drive may involve existing utilities as well as new service routes. We hydrovac pothole marked lines on the bore path before drilling near them, since surface marks show position, not depth.

Where is Alto Bonito Heights near Mikes?
Alto Bonito Heights is in Starr County at elevation 222 feet, covering 0.05 square mile in ZIP code 78582. Zarate is 0.4 miles northeast; Mikes is 0.5 miles east, and E. Lopez is 0.5 miles southeast. Villarreal lies 0.6 miles south and Rivereno 0.7 miles south. La Joya is 11.0 miles east, while county seat Rio Grande City is 12.0 miles west. From Yukon, Oklahoma, the trip is 732 road miles and a 14.3 hour drive, which is part of planning mobilization for work near FM 2360.
Places near Alto Bonito Heights
- Zarate: 0.4 miles northeast
- Directional boring in Mikes: 0.5 miles east
- E. Lopez: 0.5 miles southeast
- Villarreal: 0.6 miles south
- Rivereno: 0.7 miles south
- Directional boring in La Joya: 11 miles east
What would we bore near Las Palmas Drive in Alto Bonito Heights?
- Highway crossing: A bore beneath FM 2360 is planned around the state highway right of way and the required cover for the line type.
- Water service: A route near Saenz Street starts with confirming the water provider for that address with the county or local water district.
- Fiber route: A fiber bore near Las Palmas Drive can pass beneath a selected road or property route without cutting the surface.
- Electric conduit: Along a proposed Palma Street route, we confirm the electric line owner before planning a conduit bore.
- Creek crossing: A proposed route near Salado Creek needs channel planning and a check for federal jurisdiction.
- Street replacement: A bore near Diaz Street can be planned for a replacement line, with marked utilities exposed before drilling nearby.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Saenz Street bore quote in Alto Bonito Heights?
A map pin for a Saenz Street job shows the exact route and nearby access, which matters when the proposed bore is close to FM 2360 or another crossing. Send the address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us assess the path and prepare the bore plan.
For a route near McAllen soil, length and pipe size matter first because they set the scale of the bore and its tooling. The soil and any rock encountered affect drilling time and fluid choices. Crossings and exposed utilities matter on a route near FM 2360; pavement, pits, excavator time and sand backfill can also change the work. A Salado Creek crossing adds planning, and the 732 road miles from Yukon affect mobilization. High profile or emergency work can add scope as well.
Questions people ask about boring in Alto Bonito Heights
Does Trinity Boring Solutions take jobs in Alto Bonito Heights, Starr County, and who staffs them?
Yes, we take directional boring work in Alto Bonito Heights, Starr County. Our Yukon office coordinates the job from the first call through the bore log, while our own crews and vetted partner contractors handle field work. For a route near FM 2360, the crew plan is tied to the proposed line and road crossings.
How old are buried lines near Las Palmas Drive in Alto Bonito Heights?
The housing estimates do not date buried lines on Las Palmas Drive, but they show a median housing year of 1983 across Alto Bonito Heights. The American Community Survey estimates that 79 percent of housing units were built from 1960 to 1999. That age can make replacement bores relevant, though each existing utility has to be located and exposed before drilling nearby.
What is McAllen soil like for a bore in Alto Bonito Heights?
The USDA soil survey maps McAllen fine sandy loam across Alto Bonito Heights and sandy clay loam at about 40 inches. It reports 26 percent average clay content at that depth. Clay can cling to the reamer or grip pipe, so we plan controlled fluid and staged reaming, then adjust to conditions encountered along the actual route.
Will a bore in Alto Bonito Heights hit rock below the mapped soil?
Bedrock is not mapped in the top five feet of Alto Bonito Heights, but that does not rule out deeper rock along a route near Saenz Street. The geology map identifies Goliad Formation units with clay, sand, sandstone, marl, caliche, limestone and conglomerate. We plan for mapped soil conditions while watching for harder material as drilling advances.
Who approves a bore under FM 2360 in Alto Bonito Heights?
The utility line owner applies for a TxDOT permit for work in the FM 2360 right of way, and the TxDOT Pharr District reviews it. We prepare the bore plan and profile for that filing and work under the owner’s permit. The required cover depends on the line type and the highway crossing.
Can a line be bored under Salado Creek near Alto Bonito Heights?
A line can be planned beneath Salado Creek, which is 0.9 miles from the mapped community boundary, but the crossing needs route and channel planning. The proposed water crossing is checked for U.S. Army Corps of Engineers jurisdiction. Conditions at the selected site and the line owner’s plans determine the bore design.
Can I reach Trinity after hours about an urgent bore near Palma Street in Alto Bonito Heights?
Yes, our phone is answered 24 hours a day at (405) 409-7423. For an urgent job near Palma Street, tell us the location, what line is involved and whether the route approaches FM 2360. That helps us understand the immediate scope and what information is available for planning.
How early should I call Texas811 before a Saenz Street bore in Alto Bonito Heights?
For a bore along Saenz Street, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days after the original notice, make a new request. Worn or moved marks must be refreshed through Texas811 before work continues.
What affects the price of a directional bore near FM 2360 in Alto Bonito Heights?
The route length and pipe or conduit size set the job scale, while McAllen sandy clay loam and any rock affect drilling time and tooling. The number of utilities to cross and expose, pavement, pits and creek crossings also matter. A route near FM 2360 may need highway planning, and the 732 road miles from Yukon affect mobilization.
Where the Alto Bonito Heights facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Alto Bonito Heights
- U.S. Census Bureau, TIGER/Line 2024: Alto Bonito Heights boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Alto Bonito Heights population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Alto Bonito Heights housing units and year built
- Macrostrat geologic map compilation: map units under Alto Bonito Heights
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Starr County
- U.S. Geological Survey, Elevation Point Query Service: Alto Bonito Heights elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Alto Bonito Heights
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Alto Bonito Heights
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Alto Bonito Heights, Texas
Type the address of your job in Alto Bonito Heights. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Alto Bonito Heights
Same county: Rio Grande City · Roma · Las Lomas · Escobares · La Grulla · East Alto Bonito · Garza-Salinas II · West Alto Bonito · La Puerta · B and E · Mesquite · Valle Vista. All counties: Texas county list.
