trinityboringsolutions.com

Atlanta Texas Directional Boring: Bowie Soil, Haw Creek and Union Pacific Track

Quick Answer: The City of Atlanta water system and county reported providers such as Southwestern Electric Power make line ownership the first check before Main Street work. At Main Street and Haw Creek, we take directional boring, also called horizontal directional drilling (HDD), work in Atlanta, Texas, to pass lines below pavement and creek banks. Our Yukon main office is 348 road miles away, so Queen City area mobilization is part of planning. Bowie soil gives way to sandy clay loam around 40 inches, so reaming and fluid need control.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Atlanta bores at a glance

  • Incorporated city in Cass County, Texas. Population 5,448 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 348 miles, about 6.8 hours of driving.
  • Ground: Bowie soil is mapped on 34 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 11 percent of the area.
  • Highways inside the boundary: US 59, FM 251, Texas State Highway 43, FM 249 and Texas State Highway 77. State permit office: TxDOT Atlanta District.
  • Railroad track inside the boundary: Union Pacific, with 8 mapped street and rail crossings.
  • Named streams inside the boundary: Haw Creek, Black Bayou and Hurricane Creek.
  • Public water: City of Atlanta, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Atlanta near Haw Creek?

Trinity Boring Solutions takes directional boring work in Atlanta, Cass County, where the Census Bureau Vintage 2024 estimate puts the population at 5,448. Along Main Street or near Haw Creek, our crews can bore water, sewer, gas, electric conduit and fiber lines beneath streets, creek banks and other surface features. The line owner and route help set the plan before drilling starts.

Our main office is in Yukon, Oklahoma, and Atlanta work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have bored since 1982. That experience covers work from 3/4 inch service lines to 48 inch casing, with sizes suited to Atlanta’s street and creek crossings.

Ditch Witch JT922 directional drill rig boring beneath an airport taxiway next to a Trinity Boring Solutions truck at Will Rogers World Airport
Our Ditch Witch JT922 boring beneath a taxiway at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Atlanta ground like to bore through in Bowie soil?

The USDA soil survey maps Bowie fine sandy loam on 34 percent of Atlanta, while Cuthbert fine sandy loam and Cuthbert gravelly fine sandy loam also appear. At about 40 inches below the surface, sandy clay loam is mapped under 63 percent of the city. The average clay content at that depth is 30 percent, while 3 percent of the area is mapped as sandy. These mapped patterns point to ground that can hold a bore open but may cling to the reamer or pipe.

USDA soil survey, inside the Atlanta city limitsWhat is mapped
Soil series mappedBowie 34 percent, Cuthbert 17 percent, Kirvin 12 percent, Mattex 6 percent and Sailes 6 percent
Texture at the surfacefine sandy loam 54 percent, gravelly fine sandy loam 13 percent and loamy fine sand 12 percent
Texture about 40 inches downsandy clay loam 63 percent, clay loam 14 percent and clay 14 percent
Engineering class about 40 inches downlean clay (CL) 60 percent, clayey sand (SC) 20 percent and silt (ML) 9 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inches11 percent of the area (0 percent hard rock, 11 percent weathered rock)
Seasonal water table within 60 inches52 percent of the area
Flood prone soils15 percent of the area
High corrosion risk for uncoated steel70 percent of the area

The USDA soil survey maps bedrock within 60 inches on 11 percent of Atlanta, with weathered bedrock mapped in that area; hard bedrock is not mapped within that depth. Seasonal water tables fall within 60 inches across 52 percent, and flood prone soils cover 15 percent, so pits and creek work need attention to water. High steel corrosion risk is mapped on 70 percent of the city, a concern for uncoated casing or tracer wire. The Queen City Sand geologic unit, of Lutetian age, includes sand and clay, so a route may meet changing ground.

How do we bore Atlanta sandy clay loam?

Atlanta’s sandy clay loam and Bowie fine sandy loam call for a bore plan that accounts for cohesive ground and water. We set the route, protect nearby utilities and track the drill below the surface.

  1. Bowie fine sandy loam covers 34 percent of Atlanta, so we select fluid and reaming steps to keep cohesive soil from packing onto the reamer.
  2. Sandy clay loam is mapped at about 40 inches on 63 percent of the city; we stage reaming and have the pipe ready before opening the final hole.
  3. With seasonal water tables mapped within 60 inches across 52 percent of Atlanta, we keep pits small and pump water when needed.
  4. Before a bore near Haw Creek or Main Street, we hydrovac pothole marked utilities, then track the drill head from the surface and log depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What does a bore have to cross in Atlanta near Main Street?

US 59, FM 251, Texas State Highway 43 and Texas State Highway 77 are among the roads inside Atlanta where a bore may need to pass beneath pavement. Loop 236 is just outside the limits. Main Street runs 5.5 miles in the city, Louise Street 4.4 miles and Holly Street 2.48 miles. Pinecrest Drive adds another long route. Boring lets a line pass under these streets without cutting the pavement, while the route and permitted work area determine the setup.

CrossingTypeMapped extentWho has a say
US 59US highway8.4 roadway miles insideState highway office
FM 251State highway5 roadway miles insideState highway office
Texas State Highway 43State highway4.3 roadway miles insideState highway office
FM 249State highway3.1 roadway miles insideState highway office
Texas State Highway 77State highway3 roadway miles insideState highway office
FM 785State highway1.8 roadway miles insideState highway office
FM 1841State highway1.8 roadway miles insideState highway office
FM 995State highway1.2 roadway miles insideState highway office
FM 74State highway0.4 roadway miles insideState highway office
Loop 236Highway nearby0.3 miles outsideState highway office
Union PacificRailroad4.2 track miles insideThe railroad
Haw CreekStream3.01 channel miles insideChecked for Corps of Engineers jurisdiction
Black BayouStream2.56 channel miles insideChecked for Corps of Engineers jurisdiction
Hurricane CreekStream0.93 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 4.2 track miles inside Atlanta on its Little Rock Subdivision, and public maps show 8 street and rail crossings in the city. A track crossing needs an agreement from Union Pacific covering its conditions. Haw Creek, Black Bayou and Hurricane Creek run inside the limits, with 3.01, 2.56 and 0.93 channel miles mapped. Maps also show 13 street crossings of named streams. Fin and Feather Club Lake is inside the city, so water crossings are checked during planning.

Whose permission does Atlanta work near US 59 need?

US 59 belongs to the state highway system, so work in its right of way goes through TxDOT’s Atlanta District. The utility that owns the line submits the utility permit through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. TxDOT rules call for boring or tunneling beneath existing highway pavement, with cover and casing requirements set for the line type. A crossing of the Union Pacific track needs an agreement with the railroad, and a Haw Creek crossing is checked for federal water jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are in Atlanta near the City of Atlanta water system?

The City of Atlanta public water system uses purchased surface water and serves 5,418 people through 2,519 service connections. For an electric conduit bore, the address and line owner matter: Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative report service in Cass County. Those reports do not identify the provider for every property, so the specific line owner is confirmed before a route is set near Main Street or US 59.

Line ownerWhat it isSourceSize
City of AtlantaPublic water systemSurface water bought from another system2,519 connections, 5,418 people served
Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric CooperativeElectric utilities reporting service in Cass CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Atlanta’s median housing year at 1975; 21 percent of homes were built before 1960, and 5 percent were built in 2000 or later. A replacement bore on Louise Street may need to avoid older buried lines, while a new service has its own route to clear. We hydrovac pothole each marked utility on the bore path before drilling near it. On Main Street, that means exposing marked lines because surface paint shows position, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Do you cover Atlanta and nearby Bloomburg?

Atlanta is an incorporated city in Cass County, with an elevation of 256 feet and a land area of 12.5 square miles. Its ZIP code is 75551. Queen City is 2.7 miles north, Bloomburg is 6.5 miles east and Bivins is 6.7 miles south. Linden, the county seat, is 13.3 miles southwest; Texarkana is 23.7 miles north. Our Yukon, Oklahoma main office is 348 road miles from Atlanta, a drive of 6.8 hours, which is part of planning work around Haw Creek, US 59 and the surrounding area.

Places near Atlanta

Which jobs call for a bore in Atlanta near Louise Street?

  • Highway crossing: A line under US 59 or FM 251 needs a route that stays below pavement and fits the permitted right of way.
  • Water service: A service connection near the City of Atlanta water system needs a path that clears existing water lines.
  • Fiber route: A fiber bore along Louise Street can pass below pavement while keeping marked utilities exposed ahead of the drill.
  • Creek crossing: A Haw Creek bore needs a route below the channel, with water jurisdiction checked during planning.
  • Rail crossing: A route beneath Union Pacific track in Atlanta needs the railroad’s crossing agreement and its conditions.
  • Park or lake service: Work near Mc Noble Park or Fin and Feather Club Lake needs a route that accounts for the mapped water feature.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Atlanta work near Pinecrest Drive?

For a quote near Pinecrest Drive, start with the address or map pin, then tell us what will go underground, such as water or fiber. Include the pipe or conduit size and the footage; a sketch or plans help show the route past a street, utility or creek. That gives us a starting scope for Atlanta.

The work scope sets the price. A short service line near Pinecrest Drive with a clear route is simpler to plan than a longer crossing under US 59 or the Union Pacific track. Soil and rock, pipe size, footage, marked utilities to expose, pavement, creek crossings, pits and excavator time all affect the work. Atlanta is 348 road miles from Yukon, so mobilization matters too. High profile or emergency work can require added planning.

Questions people ask about boring in Atlanta

Does Trinity take directional boring jobs in Atlanta, Cass County, and who staffs them?

Yes. Trinity takes work in Atlanta, Cass County, using our own crews and partner drilling contractors vetted by Trinity. The customer works with Trinity through the bore log, regardless of which crew is at the site. For a route near Haw Creek or Main Street, we plan from the job details and the utility owner.

What do older homes and buried lines on Atlanta’s Louise Street mean for a replacement bore?

Atlanta’s median housing year is 1975, and 21 percent of homes were built before 1960, according to the American Community Survey 2019 to 2023 five year estimates. A replacement bore along Louise Street must account for existing buried lines. We expose marked utilities by hydrovac potholing before drilling near them, since paint does not show depth.

Can groundwater or flood prone ground affect bore pits near Atlanta’s Haw Creek?

It can. The USDA soil survey maps seasonal water tables within 60 inches across 52 percent of Atlanta and flood prone soils on 15 percent. Near Haw Creek, those conditions can put water in pits or affect a creek crossing, so we plan pit placement and pumping with the route in mind.

Does Atlanta’s Bowie soil corrode steel, and what pipe can a bore use?

High steel corrosion risk is mapped on 70 percent of Atlanta, including areas with Bowie soil. That is a consideration for steel casing and tracer wire. HDPE is not subject to that soil corrosion concern, while the line owner selects any coating for steel. The project plan should identify the material before a bore begins.

What ground does a bore pass through in Atlanta’s Bowie soil?

The USDA soil survey maps Bowie fine sandy loam on 34 percent of Atlanta. At about 40 inches, sandy clay loam is mapped on 63 percent of the city, and the mapped average clay content there is 30 percent. That cohesive ground can cling to tooling, so staged reaming and a controlled fluid plan help manage the bore.

Is rock present beneath Atlanta, and how much bedrock is mapped within five feet?

The USDA soil survey maps bedrock within 60 inches on 11 percent of Atlanta, and the mapped bedrock is weathered rather than hard. That can mean slower drilling in a limited part of a route. The Queen City Sand geologic unit also includes sandstone, siltstone and claystone, so a site route may encounter different material.

Does Trinity cover Queen City and rural sites outside Atlanta?

Yes. We take work in nearby Queen City, 2.7 miles north of Atlanta, and consider rural routes outside the city limits too. The location still affects planning: a job near US 59 or Haw Creek needs a route suited to its crossings, and distance from the Yukon main office is part of mobilization.

How much notice does Texas811 need for an Atlanta bore near Main Street?

For a bore near Main Street, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Texas811 describes the wait as two working days. If the start moves more than 14 days past the original notice, make a new request; worn or moved marks need refreshing through Texas811.

What affects the cost of directional boring in Atlanta near US 59?

The route and work scope determine the cost of a bore near US 59. Length, pipe size, Bowie soil or rock, utilities to expose, pavement, creek crossings, pits and excavator time all matter. A crossing beneath US 59 may involve different planning from a short service line, and Atlanta’s 348 road miles from Yukon affect mobilization.

Where the Atlanta facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Atlanta

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Atlanta, Texas

Type the address of your job in Atlanta. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Atlanta

Same county: Linden · Hughes Springs · Avinger · Marietta · McLeod. All counties: Texas county list.