Bivins Texas Directional Boring: Bowie Fine Sandy Loam, Union Pacific, Leek Creek
Quick Answer: Bowie fine sandy loam is common in Bivins, and its clayier layers can grip a reamer. We handle directional boring, also called horizontal directional drilling (HDD), for crossings of Leek Creek and other local obstacles. Bivins is 343 road miles from our Yukon, Oklahoma main office, with Union Pacific track crossings to plan around. Sandy clay loam is mapped at about 40 inches, so we adjust the drilling fluid and reaming to the ground.
Bivins bores at a glance
- Unincorporated community in Cass County, Texas. Population 153 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 343 miles, about 7 hours of driving.
- Ground: Bowie soil is mapped on 27 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 21 percent of the area.
- Highways inside the boundary: FM 1841, Texas State Highway 43 and FM 248. State permit office: TxDOT Atlanta District.
- Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
- Named streams inside the boundary: Leek Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Leek Creek in Bivins?
Bivins is an unincorporated community in Cass County, where the Census Bureau counted 153 people in the 2020 Census. We take directional boring work for water, sewer, gas, electric conduit and fiber. A service line along Boggie Street or a utility route near Leek Creek can be installed underground without opening the full surface route.
Our main office is in Yukon, Oklahoma, and Bivins work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982, experience we bring to Bivins project planning. Across our work, we have had no utility strike in over 25 years, a record we apply to Bivins planning. That record matters when a bore near Boggie Street must avoid existing lines, including lines owned by utilities reporting service in Cass County.

How does Bowie soil affect a directional bore in Bivins?
The USDA soil survey maps Bowie fine sandy loam across 27 percent of Bivins, with Cuthbert fine sandy loam also common. At about 40 inches below the surface, sandy clay loam is mapped under 50 percent of the area, while clay is mapped under 29 percent. We treat the soil survey patterns shown for Bivins as reference information, not as test borings. The mix can change along a route. Clay can cling to a reamer and grip pipe, so we plan staged reaming and fluid suited to the changing ground.
| USDA soil survey, inside the Bivins mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Bowie 27 percent, Cuthbert 23 percent, Sardis 13 percent, Kirvin 11 percent and Tenaha 10 percent |
| Texture at the surface | fine sandy loam 59 percent, loamy fine sand 14 percent and loam 13 percent |
| Texture about 40 inches down | sandy clay loam 50 percent, clay 29 percent and silt loam 13 percent |
| Engineering class about 40 inches down | lean clay (CL) 56 percent, silt (ML) 21 percent and clayey sand (SC) 11 percent |
| Average clay content about 40 inches down | 32 percent |
| Bedrock mapped within 60 inches | 21 percent of the area (0 percent hard rock, 21 percent weathered rock) |
| Seasonal water table within 60 inches | 50 percent of the area |
| Flood prone soils | 15 percent of the area |
| High corrosion risk for uncoated steel | 73 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches under 21 percent of Bivins, with a typical depth of 37 inches; hard bedrock is not mapped in that depth range. The seasonal water table is mapped within 60 inches under 50 percent, and flood prone soils under 15 percent, so pits near Leek Creek may need pumping and careful depth planning. High steel corrosion risk is mapped under 73 percent. The geologic map names Queen City Sand of Lutetian age, including sandstone, siltstone and claystone, so deeper conditions may slow a bore or call for a different bit.
How do crews handle sandy clay loam in Bivins?
Bivins soil maps show sandy clay loam at about 40 inches and clay in nearby mapped areas. We use the route, exposed utilities and drilling response to set the bore plan, rather than treating every part of the route alike.
- We adjust fluid and use staged reaming where Bivins soil maps show clay at about 40 inches, limiting sticky buildup around the reamer.
- Where mapped fine sandy loam gives way to clay near FM 1841, we track the drill head and log depth and pitch as the bore advances.
- The seasonal water table mapped within 60 inches under half of Bivins can fill pits, so we plan compact pits and pumping near Leek Creek.
- Before drilling near a route on Boggie Street, we hydrovac expose each marked utility because surface paint does not show its depth.

Which roads, tracks or creeks can a Bivins bore cross near Union Pacific?
FM 1841, Texas State Highway 43 and FM 248 run inside the mapped Bivins community boundary. A crossing under one of these state roads needs a TxDOT utility permit, and the bore must be planned for the roadway and its right of way. Boggie Street is the longest named street at 1.37 miles inside the community; Ambassador Way runs 0.26 miles. The mapped public road network totals 7.72 miles. A route along either named street may still need careful locating and potholing where it meets other utilities.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 1841 | State highway | 1.7 roadway miles inside | State highway office |
| Texas State Highway 43 | State highway | 1.4 roadway miles inside | State highway office |
| FM 248 | State highway | 0.6 roadway miles inside | State highway office |
| Union Pacific | Railroad | 2 track miles inside | The railroad |
| Leek Creek | Stream | 1.01 channel miles inside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 2.0 track miles inside Bivins, on its Little Rock Subdivision, and two street and rail crossings are mapped. Any track crossing needs an agreement with Union Pacific that sets the crossing conditions. Leek Creek runs 1.01 channel miles in the community, with one mapped street crossing of a named stream. For Bivins, our map review shows no lakes or ponds within one mile. Creek work needs depth planning, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Who approves a directional bore in Cass County and Bivins?
Bivins is an unincorporated community, so it has no city government to approve local streets; county roads fall to the county, while FM 1841, Texas State Highway 43 and FM 248 are state roads. TxDOT’s Atlanta District reviews a utility permit for work in state highway right of way. The utility owner files through TxDOT’s RULIS system, and we prepare the bore plan and profile for that filing. For a Union Pacific crossing near Bivins, we also need the railroad’s agreement before work proceeds. Before a bore along Boggie Street or near Leek Creek, the person arranging excavation requests locates through Texas811 at least 48 hours before work, excluding weekends and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days after the original notice, a new request is needed; worn or moved marks must be refreshed through Texas811 before work continues.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Cass County near Bivins?
The water provider for a specific Bivins address is not identified from the available EPA drinking water records. Confirm it with the county or local water district before planning a bore near Boggie Street or Leek Creek. Utilities reporting electric service in Cass County include Southwestern Electric Power, Bowie Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative. The conduit owner must be confirmed before we plan an electric bore, and hydrovac potholing helps expose marked water and electric lines before drilling close to them.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative | Electric utilities reporting service in Cass County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Bivins’s median housing year at 1981; 23 percent of housing was built before 1960, and 77 percent from 1960 to 1999. That age mix can mean replacement work as well as new service runs along Ambassador Way or Boggie Street. We pothole each marked utility on the bore path before drilling near it, since paint shows a line’s position but not its depth.

What is near Bivins and Atlanta for directional boring service?
Bivins is in Cass County, Texas, at an elevation of 299 feet and covers 1.42 square miles. The community uses ZIP code 75555. Atlanta is 6.7 miles north and is the nearest larger city; McLeod is 8.3 miles southeast, Queen City is 9.3 miles north, and Linden, the county seat, is 9.9 miles west. Our Yukon, Oklahoma main office is 343 road miles away, about a 7.0 hour drive. Those miles affect mobilization for work along FM 1841 or near Leek Creek.
Places near Bivins
- Directional boring in Atlanta: 6.7 miles north
- Directional boring in McLeod: 8.3 miles southeast
- Directional boring in Queen City: 9.3 miles north
- Directional boring in Linden: 9.9 miles west
- Directional boring in Bloomburg: 11.3 miles northeast
What kinds of bores come up along Ambassador Way in Bivins?
- Highway crossing: A bore beneath FM 1841 or Texas State Highway 43 needs a route and depth plan that fits the TxDOT right of way.
- Water service: A line near Boggie Street needs the address specific water provider confirmed before we plan a connection bore.
- Fiber conduit: A route along Ambassador Way can carry a fiber conduit beneath the street surface, with marked utilities exposed along the path.
- Creek crossing: A bore near Leek Creek needs a depth plan for the channel and a check for federal jurisdiction during planning.
- Rail crossing: A utility route beneath Union Pacific track needs the railroad’s crossing agreement and the conditions it sets.
- Replacement bore: A replacement line near FM 248 can avoid an open cut across the surface, with the existing utilities located and exposed first.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Bivins bore near Boggie Street?
A map pin matters because a bore near Boggie Street may meet different utilities or ground than one closer to Leek Creek. For a Bivins route near FM 1841, send us the address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see the route, access and crossings before we scope the work.
The job scope sets the price, starting with the 343 road miles from Yukon and the ground mapped around Bivins. Bowie fine sandy loam and deeper clay affect drilling and reaming. The route may also cross Union Pacific tracks, a state highway or Leek Creek. Pipe size and length, exposed utilities, pavement, creek conditions, pits, excavator time and backfill all shape the work. High profile or emergency work in Bivins can add planning demands, so we account for that when preparing the schedule.
Questions people ask about boring in Bivins
Does Trinity take directional boring jobs in Bivins and Cass County, and who staffs them?
Yes. We take directional boring work in Bivins, and the job is handled by our crews or a satellite yard operated by a drilling contractor Trinity has vetted. You work with Trinity through the bore log. For a route near Leek Creek, we need the location and scope to plan the work.
What does the housing age along Ambassador Way mean for Bivins replacement bores?
Bivins housing is older on average: the American Community Survey 2019 to 2023 five year estimates put the median year built at 1981. That can bring replacement work as well as new services along Ambassador Way. We locate and expose marked utilities before drilling near an existing line, since the surface marks do not show its depth.
Could groundwater or flood prone ground affect bore pits near Leek Creek in Bivins?
It could. The USDA soil survey maps a seasonal water table within 60 inches under 50 percent of Bivins and flood prone soils under 15 percent. Near Leek Creek, we plan pit placement and depth for wet ground, and pits may need pumping. Creek crossings are also checked for U.S. Army Corps of Engineers jurisdiction during planning.
Does Bowie soil in Bivins corrode steel, and what pipe can a bore use?
High steel corrosion risk is mapped under 73 percent of Bivins, including areas with Bowie fine sandy loam. For Bivins installations, HDPE is not affected by the soil corrosion concern described here. Steel casing and tracer wire may need protection chosen by the line owner. The right material depends on the utility design and the specific route near Boggie Street or another local road.
What ground does a bore pass through in Bivins, including Bowie soil?
Bowie fine sandy loam is mapped under 27 percent of Bivins. At about 40 inches, the USDA soil survey maps sandy clay loam under 50 percent and clay under 29 percent. Those mapped layers can make a reamer sticky or cause it to grip pipe. Conditions can vary along a bore, so the route and drilling response guide the method.
Is rock likely on a Bivins bore, and how much bedrock is mapped within five feet?
Weathered bedrock is mapped within 60 inches under 21 percent of Bivins, with a typical depth of 37 inches; hard bedrock is not mapped in that range. The geologic map names Queen City Sand, which includes sandstone, siltstone and claystone. A bore near Leek Creek may encounter changing material, so we monitor the drill response rather than assume uniform ground.
How far is Bivins from the Yukon office, and does Atlanta affect the job?
Bivins is 343 road miles and about a 7.0 hour drive from our Yukon, Oklahoma main office. Atlanta is 6.7 miles north of Bivins. The distance affects mobilization, while the actual scope near FM 1841 or another local route determines equipment, crew needs and planning.
How much 811 notice do I need for a bore on Boggie Street in Bivins?
Request locates through Texas811 at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before it. If a Boggie Street start slips more than 14 days past the original notice, make a new request. If marks are worn or moved on a Bivins route, we request refreshed marks through Texas811 before work continues.
What site conditions along FM 1841 can affect the cost of directional boring in Bivins?
The route and scope determine the price, not one detail alone. The distance from Yukon, pipe size and length, Bowie soil and deeper clay, utility crossings, pavement, pits, backfill and equipment time all matter. A bore near FM 1841 may need highway permit planning, while a route near Union Pacific track or Leek Creek adds crossing considerations.
Where the Bivins facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Bivins
- U.S. Census Bureau, TIGER/Line 2024: Bivins boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Bivins population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Bivins housing units and year built
- Macrostrat geologic map compilation: map units under Bivins
- U.S. Department of Transportation, North American Rail Network: track owners in Cass County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Cass County
- U.S. Geological Survey, Elevation Point Query Service: Bivins elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Bivins
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Bivins
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Bivins, Texas
Type the address of your job in Bivins. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Bivins
Same county: Hughes Springs · Avinger · Douglassville · Marietta · Domino. All counties: Texas county list.
