trinityboringsolutions.com

Linden Texas Directional Boring: Kirvin Soil, US 59 and Beach Creek

Quick Answer: Kirvin very fine sandy loam is common around Linden; clay below can grip a bore pipe. Along Beach Creek or beneath US 59, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Linden, Texas. That ground can hold an open hole, but clay may cling to reamers. Our Yukon, Oklahoma main office is 326 road miles from Linden, near Main Street and FM 125. Kirvin soil calls for controlled fluid and staged reaming before pipe goes in.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Linden bores at a glance

  • County seat of Cass County, Texas. Population 1,812 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 326 miles, about 6.6 hours of driving.
  • Ground: Kirvin soil is mapped on 28 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 6 percent of the area.
  • Highways inside the boundary: US 59, FM 125, Texas State Highway 11, Texas State Highway 8 and FM 1841. State permit office: TxDOT Atlanta District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Beach Creek.
  • Public water: City of Linden, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near US 59 in Linden?

We take directional boring work in Linden, the Cass County seat. The Census Bureau Vintage 2024 estimate puts the population at 1,812. Along US 59, Main Street or FM 125, we can install water, sewer, gas, electric conduit and fiber, with the route planned to suit each line and the road it follows or crosses.

Our main office is in Yukon, Oklahoma, and Linden work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have bored since 1982, giving us four decades of experience with ground like the clay and fine sandy loam mapped around Linden. The family business began in 1965, and you deal with Trinity from the first call through the bore log.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Kirvin soil affect a bore in Linden?

The USDA soil survey maps Kirvin across 28% of Linden and Cuthbert across 27%, with Bowie at 17%. Kirvin very fine sandy loam on gentle slopes is a major mapped soil unit. About 40 inches below the surface, sandy clay loam is mapped under 56% of the area; clay is mapped under 24%, and average clay content is 31%. These are mapped soil patterns, not test borings. The clay can keep a bore open, but sticky cuttings may collect on the reamer and grip pipe.

USDA soil survey, inside the Linden city limitsWhat is mapped
Soil series mappedKirvin 28 percent, Cuthbert 27 percent, Bowie 17 percent, Lilbert 11 percent and Darco 7 percent
Texture at the surfacegravelly fine sandy loam 28 percent, fine sandy loam 24 percent and very fine sandy loam 21 percent
Texture about 40 inches downsandy clay loam 56 percent, clay 24 percent and clay loam 10 percent
Engineering class about 40 inches downclayey sand (SC) 34 percent, lean clay (CL) 32 percent and fat clay (CH) 21 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inches6 percent of the area (0 percent hard rock, 6 percent weathered rock)
Seasonal water table within 60 inches25 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel53 percent of the area

The USDA soil survey maps bedrock within 60 inches in 6% of Linden and within 40 inches in 3%; the mapped shallow bedrock is weathered, not hard. A seasonal water table is mapped within 60 inches in 25%, and flood prone soils in 7%, so wet pits and creek approaches need attention. High steel corrosion risk is mapped in 53%. The Cenozoic Limonitic Sandy Decomposition Residuum includes clay, sand and sandstone; those changing materials can slow drilling and affect steering.

How is a bore run through Linden’s sandy clay loam?

Linden’s sandy clay loam and clay call for measured fluid use and a steady bore path. We expose marked lines first, then track depth and pitch as the drill advances near streets or Beach Creek.

  1. With clay mapped beneath much of Linden, we use controlled fluid and staged reaming to manage sticky cuttings and reduce the chance of clay gripping the pipe.
  2. Where Kirvin very fine sandy loam meets clay, we check depth and pitch at each drill rod so changing ground does not pull the bore off line.
  3. For a route near Beach Creek, we plan the bore depth beneath the channel and check during planning for U.S. Army Corps of Engineers jurisdiction.
  4. Before drilling near a marked line along Main Street, we hydrovac pothole to expose it; surface marks show position, not depth.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

Where does a line have to go under Beach Creek in Linden?

US 59 runs through Linden, along with FM 125, Texas State Highway 11 and Texas State Highway 8. Work in the right of way of any of these roads follows the TxDOT permit process. Main Street runs 1.96 miles within the city, while Houston Street runs 1.87 miles and Foster Street 0.97 miles. Hall Road adds another named route. Boring beneath these streets can keep pavement intact, with entry and exit pits placed off the traveled surface.

CrossingTypeMapped extentWho has a say
US 59US highway2.7 roadway miles insideState highway office
FM 125State highway2.4 roadway miles insideState highway office
Texas State Highway 11State highway1.9 roadway miles insideState highway office
Texas State Highway 8State highway1.9 roadway miles insideState highway office
FM 1841State highway0.9 roadway miles insideState highway office
Texas State Highway 155State highway0.5 roadway miles insideState highway office
FM 1913State highway0.3 roadway miles insideState highway office
FM 1399State highway0.2 roadway miles insideState highway office
Beach CreekStream0.93 channel miles insideChecked for Corps of Engineers jurisdiction
Colley CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Jim BayouStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
George Wesley Morse LakeLake or pond8 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped within Linden or within 1 mile outside its limits, and no street and rail crossings are mapped in the city. Beach Creek runs 0.93 channel miles inside Linden, with three mapped street crossings of named streams. Colley Creek and Jim Bayou are also nearby outside the limits. A crossing plan for Beach Creek or another water feature is checked for U.S. Army Corps of Engineers jurisdiction; George Wesley Morse Lake is just outside the city.

Do I need approval to bore roads in Linden or Cass County?

Main Street and other city streets belong to the City of Linden, while US 59, FM 125, Texas State Highway 11 and Texas State Highway 8 are state routes. Work in a highway right of way needs a TxDOT utility permit. The TxDOT Atlanta District reviews it, and the utility that owns the line files through RULIS; we prepare the bore plan and profile for that filing. For Beach Creek, planning includes a check for federal waterway jurisdiction. Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days, a new notice is needed; worn or moved marks must be refreshed through Texas811 before work continues.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Linden water system?

The City of Linden public water system serves 1,813 people through 942 connections and draws water from groundwater wells. Before planning an electric conduit bore near Main Street or another route, we confirm the line owner. Utilities reporting electric service in Cass County include Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative; service can vary by address.

Line ownerWhat it isSourceSize
City of LindenPublic water systemGroundwater wells942 connections, 1,813 people served
Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric CooperativeElectric utilities reporting service in Cass CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Linden’s median housing year at 1973. The estimates show 26% of homes built before 1960 and 7% built in 2000 or later, so a project may involve replacement lines as well as new services. We hydrovac pothole each marked utility on the bore path before drilling near it. For a proposed line under Main Street, paint shows the marked position, not the utility’s depth, so we expose it and verify.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Linden in relation to Douglassville and our Yukon yard?

Linden is in Cass County, covers 3.53 square miles and sits at an elevation of 366 feet. ZIP code 75563 serves the city. Linden is the county seat, and Atlanta, 13.3 miles northeast, is the nearest larger city. Bivins is 9.9 miles east, while Douglassville is 12.5 miles north. Our Yukon, Oklahoma main office is 326 road miles away, a drive of 6.6 hours. Those distances matter when a project needs equipment and crew mobilization.

Places near Linden

What kinds of bores come up near Main Street in Linden?

  • Highway crossing: A utility route under US 59 is bored beneath the travel lanes, with pits placed beyond the pavement where the site allows.
  • Water service: A new line near the City of Linden system can run beneath a driveway or street without cutting the surface.
  • Fiber conduit: A conduit route along Main Street can pass beneath pavement while marked utilities are exposed before drilling near them.
  • Creek crossing: A route under Beach Creek needs a planned depth beneath the channel and a check for waterway jurisdiction.
  • Electric conduit: Near FM 125, we confirm the line owner before planning a conduit bore and set the route around marked utilities.
  • Acreage service: At a rural site toward Bivins, a bore can carry water, sewer or conduit along a property access route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of directional boring near Hall Road in Linden?

A map pin near Hall Road or Beach Creek helps us see the exact route and whether it approaches a road or water crossing. Send the address, what will go underground, the pipe or conduit size and the footage. A sketch or plans can show pits, pavement and nearby utilities that affect the bore plan.

In Linden, ground conditions come first: clay beneath the mapped sandy clay loam can cling to pipe and affect reaming. Next are creek crossings such as Beach Creek and the utilities that need exposure along the route. Pipe size, bore length, pavement, pit space, excavator time and sand backfill also shape the scope. Work near US 59 may add highway planning, while the 326 road miles from Yukon affect mobilization.

Questions people ask about boring in Linden

Does Trinity Boring Solutions take directional boring jobs in Linden and Cass County?

Yes. We take work in Linden and across Texas, with our own crews and partner contractor satellite yards supporting jobs. You work with Trinity through the bore log, regardless of which crew is on site. For a route near US 59, share the location and line details so we can plan the scope.

What ground does a bore pass through in Linden near Kirvin soil?

The USDA soil survey maps Kirvin as 28% of Linden, and sandy clay loam under about 40 inches in 56% of the city. Clay can hold an open bore but may stick to reamers and grip pipe. Mapped patterns describe the area, not conditions confirmed by test borings at a particular address.

Is there shallow rock along a directional bore in Linden?

Some shallow bedrock is mapped: within 60 inches in 6% of Linden and within 40 inches in 3%. The mapped bedrock within five feet is weathered, with no hard bedrock mapped at that depth. The Cenozoic Limonitic Sandy Decomposition Residuum includes sandstone, so site conditions can still change along a route.

Who approves a bore beneath US 59 in Linden?

TxDOT handles work in the US 59 right of way through its Atlanta District. The utility owner submits the application in RULIS, and we provide the bore plan and profile for the utility’s filing. Main Street is a city street, not a TxDOT highway route.

Can a utility line be bored beneath Beach Creek in Linden?

A bore can be planned beneath Beach Creek, which has 0.93 channel miles inside Linden. The route needs a depth plan beneath the channel, and planning checks whether the crossing is under U.S. Army Corps of Engineers jurisdiction. Nearby Colley Creek and Jim Bayou may matter for routes outside the city limits.

Where does Linden get its public water?

The City of Linden owns the public water system, which uses groundwater wells. It serves 1,813 people through 942 connections. For a proposed water or conduit route near FM 125, we identify marked utilities before the drill approaches them.

Does Trinity cover Bivins and rural sites outside Linden?

Yes. We take work in Bivins, 9.9 miles east of Linden, and at rural sites beyond the city limits. The Yukon main office is 326 road miles from Linden, so mobilization is part of planning for a route near Bivins or another Cass County location.

How early should I request utility marks for work near Main Street in Linden?

Request a Texas811 locate at least 48 hours before excavation, not counting Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If a Main Street job slips more than 14 days past the original notice, make a new request. Refresh worn or moved marks through Texas811 before work continues.

What affects the cost of a directional bore near US 59 in Linden?

The scope sets the cost. Linden’s clay affects reaming, while a US 59 crossing can involve highway planning; Beach Creek, pavement, utility exposures, pit needs, line size and bore length also matter. Mobilization from the Yukon yard is another consideration because Linden is 326 road miles away.

Where the Linden facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Linden

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Linden, Texas

Type the address of your job in Linden. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Linden

Same county: Hughes Springs · Queen City · Bloomburg · Domino · McLeod. All counties: Texas county list.