trinityboringsolutions.com

Douglassville Texas Directional Boring: Cuthbert Soil, Texas State Highway 8, Douglassville Creek

Quick Answer: Texas State Highway 8 is the main road crossing to plan around, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Douglassville. The Yukon, Oklahoma main office is 322 road miles away, so a West Street project needs its access and mobilization planned. The USDA soil survey maps sandy clay loam under about 43 percent of the area at 40 inches. Clay is also common there, so we manage drilling fluid and ream in stages to help keep the hole stable.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Douglassville bores at a glance

  • Incorporated city in Cass County, Texas. Population 211 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 322 miles, about 6.5 hours of driving.
  • Ground: Cuthbert soil is mapped on 36 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 30 percent of the area.
  • Highways inside the boundary: Texas State Highway 8. State permit office: TxDOT Atlanta District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Douglassville Creek, Webster Creek and Carlow Creek.
  • Public water: City of Douglassville, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near West Street in Douglassville?

Douglassville is in Cass County, where the Census Bureau Vintage 2024 estimate puts the population at 211. Along West Street, North Street or Oliver Street, we can bore water, sewer, gas, electric conduit and fiber lines while leaving the road surface uncut. We handle the work from planning through the bore log, with the line type and route setting the drilling plan.

Our main office is in Yukon, Oklahoma, and Douglassville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Near Oliver Street, we can use 3/4 inch lines for a small service, while larger work can use 48 inch casing. Our family business started in 1965, and we have done directional boring since 1982, with those capabilities suited to Douglassville’s streets and highway crossings.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Cuthbert soil like to bore in Douglassville?

The USDA soil survey maps Cuthbert soil across 36 percent of Douglassville, including Cuthbert fine sandy loam on 30 percent of the mapped area. Fine sandy loam is the surface texture across 68 percent. At about 40 inches below the surface, sandy clay loam is mapped under 43 percent and clay under 41 percent. We use mapped Cuthbert and Bowie soils to inform Douglassville crossing plans, but never treat those soil patterns as test borings. The mix means a West Street bore may move from easier cutting near the surface into sticky, tighter material at depth, so the drilling fluid and reaming plan need to account for that change.

USDA soil survey, inside the Douglassville city limitsWhat is mapped
Soil series mappedCuthbert 36 percent, Bowie 22 percent, Kirvin 14 percent, Iulus 7 percent and Sailes 5 percent
Texture at the surfacefine sandy loam 68 percent, very fine sandy loam 10 percent and gravelly fine sandy loam 10 percent
Texture about 40 inches downsandy clay loam 43 percent, clay 41 percent and fine sandy loam 7 percent
Engineering class about 40 inches downlean clay (CL) 34 percent, silt (ML) 30 percent and clayey sand (SC) 17 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches30 percent of the area (0 percent hard rock, 30 percent weathered rock)
Seasonal water table within 60 inches35 percent of the area
Flood prone soils11 percent of the area
High corrosion risk for uncoated steel72 percent of the area

The survey maps bedrock within 60 inches under 30 percent of Douglassville, all mapped as weathered rather than hard bedrock; typical depth is 37 inches. Seasonal water tables are mapped within 60 inches under 35 percent, and flood prone soils under 11 percent, so Douglassville Creek crossings need depth and pit planning. High steel corrosion risk is mapped under 72 percent, a concern for uncoated steel casing or tracer wire. The geologic map unit is Queen City Sand, of Lutetian age, with sandstone and claystone among its materials.

What does it take to bore Douglassville’s sandy clay loam?

Douglassville’s sandy clay loam and clay shares can change the way the hole behaves with depth. We set the route, fluid and reaming sequence around the mapped ground and the nearby streets or creeks.

  1. We review the route against Cuthbert soil and the mapped sandy clay loam at depth, then plan the bore path, entry and exit pits around the street or creek.
  2. Before the drill approaches any marked utility on a Douglassville route, we hydrovac pothole it; paint shows position, not depth, so we verify the line below ground.
  3. In Douglassville’s clay rich ground, we adjust fluid and ream in stages to limit sticky cuttings and help keep the hole open for the pipe pull.
  4. We track the drill head from the surface and log depth and pitch as a West Street or creek bore advances, keeping the route clear of pavement cuts.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

What does a bore have to cross near West Street in Douglassville?

Texas State Highway 8 has 2.7 mapped roadway miles inside Douglassville, so a route crossing it needs a separate right of way plan. The town has 15.27 public road centerline miles. West Street is the longest named street at 2.68 miles, followed by North Street at 0.81 miles and South Street at 0.49 miles. Oliver Street adds another local route at 0.33 miles. Douglassville is incorporated, so its city streets are under city jurisdiction; a bore can pass beneath pavement without cutting it, with pits set in the dirt on either side.

CrossingTypeMapped extentWho has a say
Texas State Highway 8State highway2.7 roadway miles insideState highway office
Douglassville CreekStream1.82 channel miles insideChecked for Corps of Engineers jurisdiction
Webster CreekStream1.4 channel miles insideChecked for Corps of Engineers jurisdiction
Carlow CreekStream1.17 channel miles insideChecked for Corps of Engineers jurisdiction
Shoal CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Brown CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Lake PatmanLake or pond12,109 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Douglassville or within one mile outside its limits, and no street and rail crossings are mapped. Douglassville Creek, Webster Creek and Carlow Creek run 1.82, 1.4 and 1.17 channel miles in town. Five mapped street crossings of named streams make creek depth and access relevant to route planning. Lake Patman, outside town limits, is within one mile. Creek and lake crossings are checked during planning for U.S. Army Corps of Engineers jurisdiction.

Whose permission does Texas State Highway 8 work in Douglassville need?

Texas State Highway 8 is a state highway, so work in its right of way needs a Texas Department of Transportation utility permit. The TxDOT Atlanta District reviews the application. The utility that owns the line files it in TxDOT’s online RULIS system, and we prepare the bore plan and profile for that filing. At a highway crossing, electric and communication lines need 60 inches of cover below the lowest crossed grade; water lines and pressurized sewer lines also need 60 inches. TxDOT requires boring or tunneling beneath existing highway pavement, and the permit may set a different depth. Douglassville Creek crossings are checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Cass County and Douglassville?

For underground work in Douglassville, we account for the public water system’s groundwater wells, serving 211 people through 86 service connections, during route planning. A water service bore along Oliver Street may connect to that system, but the route and owner still need confirming. Utilities reporting electric service in Cass County include Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative. We confirm the electric line owner before planning a conduit bore, since the county list does not identify the provider for each address.

Line ownerWhat it isSourceSize
City of DouglassvillePublic water systemGroundwater wells86 connections, 211 people served
Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric CooperativeElectric utilities reporting service in Cass CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates give Douglassville a median housing year of 1973; 34 percent of homes were built before 1960 and 16 percent in 2000 or later. That mix can mean replacement work as well as new services. Before drilling near any marked utility, we hydrovac pothole it to verify its depth, since paint only shows its position. For example, a proposed line under West Street needs its marked crossings exposed before the drill approaches.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Where is Douglassville in relation to Maud and nearby towns?

Douglassville covers 6.33 square miles in Cass County, at an elevation of 381 feet, and uses ZIP code 75560. Maud is 9.6 miles north; Marietta is 11.1 miles west; and Queen City is 11.8 miles east. Atlanta, the nearest larger city, is 12.0 miles southeast, while Linden, the county seat, is 12.5 miles south. The Yukon, Oklahoma main office is 322 road miles away, about 6.5 hours by drive. That distance is part of planning mobilization for a West Street or Texas State Highway 8 bore.

Places near Douglassville

What boring work comes up near Douglassville Creek in Douglassville?

  • Highway crossing: A bore beneath Texas State Highway 8 needs a planned route, highway right of way permit and cover set for the line type.
  • Water service: A connection to the City of Douglassville system can run under Oliver Street, with the existing water line exposed before the drill approaches.
  • Creek crossing: A Douglassville Creek bore needs a route planned below the channel and a check for U.S. Army Corps of Engineers jurisdiction.
  • Fiber conduit: A fiber route along West Street can pass beneath pavement without an open cut, with pits placed off the paved surface.
  • Sewer line: A sewer bore near South Street needs its size, route and nearby marked utilities checked before drilling through the mapped clay soils.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Oliver Street in Douglassville?

For a proposed line near Oliver Street, start with the address or map pin and say what is going underground. Include the pipe or conduit size and the footage; a sketch or plans help show the route. A Texas State Highway 8 crossing or a Douglassville Creek approach should be marked on the plan so we can account for the route and access.

Length and pipe or conduit size set the basic scope, while Douglassville’s sandy clay loam and clay affect drilling and reaming. The number of utilities to expose matters on a West Street route, as do pavement and concrete. A Douglassville Creek crossing can add depth, access and pit work. Sand backfill and excavator time also affect the plan. With the Yukon office 322 road miles away, mobilization is another factor for this location.

Questions people ask about boring in Douglassville

Does Trinity Boring Solutions take directional boring jobs in Douglassville and Cass County?

Yes. Trinity takes directional boring work in Douglassville, with the Yukon office coordinating the job and crews supplied by our own team or vetted partner drilling contractors. You work with Trinity from the initial call through the bore log, whichever crew is on site. West Street and Texas State Highway 8 are examples of routes we can assess.

What ground does a bore pass through in Douglassville near Cuthbert soil?

The USDA soil survey maps Cuthbert soil across 36 percent of Douglassville. At about 40 inches below the surface, sandy clay loam is mapped under 43 percent and clay under 41 percent. Those mapped patterns can mean a bore encounters sticky material at depth, so we plan fluid and reaming for the ground along the proposed route.

Is there rock near the surface for a Douglassville bore?

The USDA soil survey maps bedrock within five feet under 30 percent of Douglassville, and that mapped bedrock is weathered rather than hard. Typical depth is 37 inches. The map does not say every West Street route will encounter rock, so the bore plan needs to account for possible changes in ground instead of treating the map as a site test.

Who approves a Douglassville bore under Texas State Highway 8?

TxDOT reviews the utility permit for work in the Texas State Highway 8 right of way through its Atlanta District. The utility that owns the line submits the application through RULIS; we provide the bore plan and profile. Highway pavement is bored or tunneled beneath, and the permit sets the required cover for the line crossing.

Can a line be bored under Douglassville Creek in Douglassville?

A line can be planned beneath Douglassville Creek, with the bore depth set to stay below the channel. When we plan a crossing at Douglassville Creek, we check whether the work falls under US Army Corps of Engineers jurisdiction. Douglassville Creek has 1.82 channel miles in town, and the route also needs workable entry and exit pit locations.

How do we identify who runs Douglassville’s public water system near Texas State Highway 8 and confirm its water comes from groundwater wells?

The City of Douglassville owns the public water system, which draws from groundwater wells. The system serves 211 people through 86 service connections in Douglassville, and we account for existing water service when planning underground work near West Street. For a water line bore near Oliver Street, we confirm the connection point and expose marked utilities along the route before drilling.

Can I reach Trinity after hours about an urgent Douglassville bore near South Street?

Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423, including for an urgent job near South Street. Tell us the location and what line is involved so we can discuss the route and site conditions. Douglassville Creek or Texas State Highway 8 crossings may need added planning.

How much notice does Texas811 need for a Douglassville bore near West Street?

Count back at least 48 hours before digging, excluding Saturdays, Sundays and legal holidays, for a West Street bore. The request cannot be made earlier than 14 days before work. If our start near South Street moves more than 14 days past the original notice, we make a new request before proceeding. Before work continues near North Street, we refresh worn or moved marks through Texas811 to keep the marked route current.

What affects the cost of a Douglassville bore under Texas State Highway 8?

The job’s length and line size, Douglassville’s clay and sandy clay loam, and the number of utilities to expose all affect the price. Pavement, pits, creek or drainage crossings, backfill and excavator time can add work. A Texas State Highway 8 crossing also needs its permit and cover planned, and the Yukon office’s 322 road miles affect mobilization.

Where the Douglassville facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Douglassville

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Douglassville, Texas

Type the address of your job in Douglassville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Douglassville

Same county: Hughes Springs · Avinger · Bloomburg · Domino · Bivins · McLeod. All counties: Texas county list.