trinityboringsolutions.com

Belterra Texas Directional Boring: Brackett Soil, Bear Creek And US 290

Quick Answer: Belterra is an unincorporated community in Hays County, and we do directional boring, also called horizontal directional drilling (HDD), for routes near US 290. Bear Creek runs through the community, so a crossing needs its channel considered in the bore plan. Belterra is 418 road miles from our Yukon, Oklahoma main office, with Belterra Drive among the streets a bore may follow. Brackett soil and shallow mapped bedrock can slow drilling and make staged reaming useful.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Belterra bores at a glance

  • Unincorporated community in Hays County, Texas. Population 6,170 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 418 miles, about 8.1 hours of driving.
  • Ground: Brackett soil is mapped on 75 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 89 percent of the area.
  • Highways inside the boundary: US 290. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Bear Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Bear Creek in Belterra?

Belterra is an unincorporated community in Hays County, so it has no city government and its streets are county or state roads. The Census Bureau counted 6,170 people here in the 2020 Census. We install water, sewer, gas, electric conduit and fiber lines, including routes along Belterra Drive or near Bear Creek.

Our main office is in Yukon, Oklahoma, and Belterra work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa. Compared with that reach, a Belterra service line along Mesa Verde Drive is a shorter, site specific job. We have worked in Texas since our family business started in 1965 and began directional boring in 1982.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Brackett soil affect drilling in Belterra?

The USDA soil survey maps Brackett soil across 75 percent of Belterra, with Sunev at 11 percent and Doss and Comfort at 5 percent each. Brackett Rock outcrop Comfort complex on 1 to 8 percent slopes covers 50 percent of the area, while Brackett Rock outcrop Real complex on 8 to 30 percent slopes covers 25 percent. Surface textures are mostly paragravelly clay loam at 50 percent and gravelly clay loam at 25 percent. About 40 inches down, bedrock is mapped across 89 percent and clay loam across 11 percent. We treat Brackett, Sunev, Doss, and Comfort soil survey patterns as planning context, not test borings, for Belterra routes.

USDA soil survey, inside the Belterra mapped community boundaryWhat is mapped
Soil series mappedBrackett 75 percent, Sunev 11 percent, Doss 5 percent, Comfort 5 percent and Bolar 4 percent
Texture at the surfaceparagravelly clay loam 50 percent, gravelly clay loam 25 percent and clay loam 15 percent
Texture about 40 inches downbedrock 89 percent and clay loam 11 percent
Engineering class about 40 inches downlean clay (CL) 11 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inches89 percent of the area (9 percent hard rock, 80 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel10 percent of the area

The USDA survey gives a typical bedrock depth of 15 inches. It maps weathered bedrock within 60 inches across 80 percent of Belterra and hard bedrock across 9 percent, so a route may shift from soil into rock and need slower drilling or rock tooling. Near Bear Creek, we treat unmapped seasonal water table and flood prone soils as a field planning uncertainty, not confirmed conditions. High steel corrosion risk is mapped across 10 percent, which can matter for casing and tracer wire choices. The geologic map names Glen Rose Limestone of Albian age; conditions still need checking at the bore site.

What does it take to bore Belterra bedrock?

Brackett soil and bedrock mapped close to the surface call for a bore plan that accounts for changing ground. Along Belterra Drive, we track the drill head and record depth and pitch as it advances.

  1. Brackett soil covers much of Belterra, so we ream in stages and manage drilling fluid to keep the hole stable without building excess pressure.
  2. With bedrock mapped at a typical depth of 15 inches, we allow for rock tooling and slower progress where weathered or harder rock is encountered.
  3. Before drilling near a marked utility along Mesa Verde Drive, we hydrovac pothole it; surface paint gives location, not depth.
  4. A walkover locator follows the drill head near Bear Creek, while depth and pitch readings guide the bore through changing ground.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

Which roads, tracks or creeks might a Belterra Drive bore cross?

US 290 has 0.4 mapped roadway miles inside the Belterra community boundary, making it the highway to account for on a route near the north side. Belterra Drive runs 2.74 miles inside the community, Mesa Verde Drive 2.65 miles and Trinity Hills Drive 1.49 miles. A route under Belterra Drive can leave the street surface intact, with entry and exit pits placed in the dirt. For a proposed line beneath that street, we hydrovac pothole marked utilities to verify their depth before drilling near them.

CrossingTypeMapped extentWho has a say
US 290US highway0.4 roadway miles insideState highway office
Bear CreekStream0.54 channel miles insideChecked for Corps of Engineers jurisdiction
Spring HollowStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Belterra or within one mile outside the community boundary, and no mapped street and rail crossings are shown. Bear Creek runs 0.54 channel miles inside the community, but no street crossings of named streams are mapped. Spring Hollow is 0.7 miles from the boundary. For Belterra routes, we use the absence of lakes or ponds mapped within one mile as map context, not a substitute for site checks. A planned creek crossing still needs a check for U.S. Army Corps of Engineers jurisdiction.

Who signs off on Belterra work in Hays County?

Belterra is unincorporated, so there is no city government to approve its streets; road authority depends on whether a route is on a county road or state right of way. Work in the US 290 right of way needs a TxDOT utility permit, reviewed by the TxDOT Austin District. The utility owner submits through RULIS, and we prepare the bore plan and profile for that filing. TxDOT rules set 60 inches of cover for electric, communication and water lines crossing a highway, and 60 inches for pressurized sewer. A Bear Creek crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Hays County and Belterra?

The water provider for a specific Belterra address has to be confirmed with the city, the county or the local water district before a bore is planned. EPA drinking water records do not match a provider to this unincorporated place. For electric service reported in Hays County, the utilities are City of San Marcos, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. Those records do not identify the provider at every Belterra address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of San Marcos, Bluebonnet Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Hays CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 estimates put Belterra’s median housing year at 2012; 98 percent of homes were built in 2000 or later, and 2 percent from 1960 to 1999. None are mapped as built before 1960. A Mesa Verde Drive project may be a new service or a replacement, and the route needs checking either way. Marked utilities on the bore path are exposed by hydrovac before the drill approaches; paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What is near Belterra, Buda and the surrounding area?

Belterra is in Hays County, at an elevation of 1,096 feet, and covers 2.34 square miles. Its ZIP code is 78737. Bear Creek is 2.7 miles east, Driftwood is 5.0 miles southwest and Dripping Springs is 6.5 miles west. Buda, the nearest larger city, is 10.7 miles southeast; San Marcos, the county seat, is 21.9 miles south. From our Yukon, Oklahoma main office, Belterra is 418 road miles away, an 8.1 hour drive, which is part of planning crew mobilization for a job near US 290.

Places near Belterra

What kinds of bores might come up near Mesa Verde Drive in Belterra?

  • Highway crossing: A route under US 290 uses a bore beneath the roadway, with the line owner handling the TxDOT permit application.
  • Water service: A service near Belterra Drive needs the address specific water provider confirmed before the route and connection are planned.
  • Fiber conduit: A conduit bore along Mesa Verde Drive can avoid opening pavement while marked utilities are checked along the path.
  • Creek crossing: A proposed line beneath Bear Creek needs channel conditions and federal jurisdiction considered during planning.
  • Street route: A sewer or water line near Trinity Hills Drive can be placed by boring between pits rather than cutting the street.
  • Electric conduit: A route near US 290 starts with confirming the line owner and identifying any utility crossings along the proposed path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Belterra bore near US 290?

For a Belterra quote, start with an address or map pin, such as a location on Mesa Verde Drive or near US 290. Tell us what will go underground, whether it is water, sewer, gas, electric conduit or fiber. Give the pipe or conduit size and footage, then add a sketch or plans if you have them.

Mobilization begins with the 418 road miles from Yukon. Brackett soil and bedrock mapped near the surface can affect drilling time and tooling. A route under US 290 or across Bear Creek brings added planning, while pavement, utility crossings, potholing, pits, excavator time and sand backfill also shape the work. Pipe size and bore length matter too. High profile or emergency work can change the schedule and scope.

Questions people ask about boring in Belterra

Does Trinity Boring Solutions take directional boring jobs in Belterra, Hays County?

Yes. In Hays County, we take directional boring work in Belterra and across Texas, planning each route around its specific crossing. The job is staffed by our own crews or partner drilling contractors we have vetted, with Trinity handling the work from first call through bore log. For a location on Belterra Drive, the address and proposed route help determine the crew and plan.

Can a line be bored under Bear Creek in Belterra?

A bore beneath Bear Creek can be planned, subject to the channel, route and site conditions. The creek runs 0.54 channel miles inside Belterra, and its crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The route also needs suitable entry and exit pit locations.

Who owns the electric lines in Belterra, Hays County, and who confirms conduit specs?

Electric service reporting for Hays County includes City of San Marcos, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. That does not establish which one serves a particular Belterra address. We confirm the line owner before planning an electric conduit bore, then use that owner’s requirements for the proposed route near a street such as Mesa Verde Drive.

Does Hays County or a city control Trinity Hills Drive in Belterra, and must it be cut?

Belterra is unincorporated and has no city government, so its roads fall under county or state authority rather than a city street department. Trinity Hills Drive is a named street in the community. A bore can pass beneath a street without cutting its surface, subject to the route, access and applicable road authority approval.

Are buried lines on Mesa Verde Drive in Belterra old, or are they mostly new services?

Belterra’s American Community Survey 2019 to 2023 estimates give a median housing year of 2012, with 98 percent of homes built in 2000 or later. A Mesa Verde Drive project could still involve replacement or a new service; housing age does not establish the age of a buried line. Marked utilities need to be exposed before drilling near them.

What ground does a Belterra bore face in Brackett soil?

Brackett is the dominant mapped soil series in Belterra, covering 75 percent of the area. About 40 inches down, the USDA soil survey maps bedrock across 89 percent and clay loam across 11 percent. The mapped conditions are not test borings, but they indicate that drilling may encounter rock well before reaching that depth.

How much 811 notice does a Belterra Drive bore need, and what if marks move?

For a bore along Belterra Drive, Texas811 needs notice at least two working days before excavation starts. The request cannot be made earlier than 14 days before work, and a new notice is needed if the start slips more than 14 days beyond the original notice. If marks wear off or move, have them refreshed through Texas811 before work continues.

How far is Belterra from Buda and Trinity’s Yukon, Oklahoma main office?

Belterra is 10.7 miles northwest of Buda and 418 road miles from our Yukon, Oklahoma main office, an 8.1 hour drive. The distance affects mobilization planning for a job near US 290, but the route, ground and bore scope also shape the work plan.

What affects the cost of a directional bore near US 290 in Belterra?

The job details drive the price. For a route near US 290, factors include bore length, pipe or conduit size, Brackett soil and bedrock, utility crossings, pavement, pits and excavator time. A Bear Creek crossing adds planning considerations, and mobilization reflects Belterra’s 418 road miles from Yukon. High profile or emergency work can also affect scope.

Where the Belterra facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Belterra

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Belterra, Texas

Type the address of your job in Belterra. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Belterra

Same county: San Marcos · Kyle · Wimberley · Woodcreek · Uhland · Austin · Mountain City · Niederwald · Creedmoor. All counties: Texas county list.