Creedmoor Texas Directional Boring: Houston Black, FM 1327 and Cowpen Creek
Quick Answer: FM 1327 and Cowpen Creek are mapped obstacles; Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Creedmoor, Texas. Creedmoor is 419 road miles from our Yukon, Oklahoma main office, so the route to Williamson Road affects mobilization. Houston Black soil covers 63 percent of the mapped area, and sticky clay can grip pipe during pullback. That ground calls for staged reaming and a ready pipe string before the hole is opened along Turnersville Road.
Creedmoor bores at a glance
- Incorporated city in Travis County and Hays County, Texas. Population 423 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 419 miles, about 7.9 hours of driving.
- Ground: Houston Black soil is mapped on 63 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 11 percent of the area.
- Highways inside the boundary: FM 1327, Texas State Highway 45 and FM 1625. State permit office: TxDOT Austin District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Cowpen Creek, Dry Creek, Maha Creek and Elm Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Williamson Road in Creedmoor?
Trinity Boring Solutions handles directional boring in Creedmoor, an incorporated city split between Travis County and Hays County, with 90 percent of its area in Travis County. The Census Bureau Vintage 2024 estimate puts the population at 423, which gives a sense of the place but not the route conditions along Williamson Road. We install water, sewer, gas, electric conduit and fiber where service routes need to pass beneath FM 1327, Turnersville Road or a driveway.
Our main office is in Yukon, Oklahoma, and Creedmoor work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle 3/4 inch service lines through 48 inch casing, from a short 10 feet service near Williamson Road to a long 5,000 feet conduit bore where the route requires it. Our family business started in 1965 and has done directional boring since 1982, including work suited to Creedmoor’s FM 1327 corridor.

What ground should a bore expect in Creedmoor’s Houston Black soil?
Houston Black is the leading mapped soil series in Creedmoor, covering 63 percent of the city in the USDA soil survey. About 40 inches below the surface, the survey maps clay in 89 percent of the area, with an average clay content of 53 percent at that depth. Surface clay accounts for 64 percent, while sandy ground is not mapped at that depth. We treat Houston Black, Burleson, Heiden and Austin soil series as mapped patterns, not test borings along a Creedmoor route. The heavy clay can stick to a reamer and swell against pipe, so the bore plan should account for staged reaming and a timely pullback.
| USDA soil survey, inside the Creedmoor city limits | What is mapped |
|---|---|
| Soil series mapped | Houston Black 63 percent, Burleson 13 percent, Heiden 8 percent, Austin 7 percent and Ferris 3 percent |
| Texture at the surface | clay 64 percent, gravelly clay 26 percent and silty clay 7 percent |
| Texture about 40 inches down | clay 89 percent, bedrock 7 percent and gravelly clay 3 percent |
| Engineering class about 40 inches down | fat clay (CH) 89 percent and clayey gravel (GC) 3 percent |
| Average clay content about 40 inches down | 53 percent |
| Bedrock mapped within 60 inches | 11 percent of the area (0 percent hard rock, 11 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The USDA soil survey maps bedrock within five feet in 11 percent of Creedmoor, all of it weathered, with a typical mapped depth of 31 inches; hard bedrock is not mapped in that depth range. Seasonal water tables are not mapped within five feet, while flood prone soils cover 2 percent. High steel corrosion risk is mapped across the area, so the line owner should weigh casing and tracer wire materials; HDPE is not affected by that soil corrosion concern. The geologic map names the Navarro Group and Marlbrook Marl, undivided, of Maastrichtian age, with clay, siltstone, mudstone, sandstone and limestone. That mix makes site checks important even where the surface map shows clay.
How do crews bore Creedmoor’s clay without losing the line?
Creedmoor’s Houston Black clay calls for control of sticky cuttings and fluid returns. We match the reaming sequence to the route, then keep the pipe ready so the open hole is not left waiting along FM 1327.
- On a Houston Black clay route, we use thinner drilling fluid with polymer and open the hole through staged reaming to limit sticky buildup on the reamer.
- Along FM 1327 pavement, we watch fluid returns and keep pressure controlled so drilling fluid does not lift the surface.
- Before the final ream near Williamson Road, we have the pipe laid out and ready, then pull it the same day the hole is opened.
- At a Cowpen Creek crossing, we plan the bore depth beneath the channel and check whether the crossing falls under Corps jurisdiction.

What is in the way of a new line near Creedmoor’s Cowpen Creek?
FM 1327 runs 2.8 roadway miles inside Creedmoor, while Texas State Highway 45 has 2.6 miles and FM 1625 has 2.5 miles within the city. US 183 is 0.7 miles outside the limits and Texas State Highway 130 is 1.3 miles away. Williamson Road is the longest named street at 3.66 miles in the city; Turnersville Road runs 2.44 miles and Graef Road runs 1.64 miles. Those roads give a bore several potential approaches, but the exact crossing point determines pit placement and the required route beneath pavement.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 1327 | State highway | 2.8 roadway miles inside | State highway office |
| Texas State Highway 45 | State highway | 2.6 roadway miles inside | State highway office |
| FM 1625 | State highway | 2.5 roadway miles inside | State highway office |
| US 183 | Highway nearby | 0.7 miles outside | State highway office |
| Texas State Highway 130 | Highway nearby | 1.3 miles outside | State highway office |
| Cowpen Creek | Stream | 1.92 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dry Creek | Stream | 1.13 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Maha Creek | Stream | 0.9 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Elm Creek | Stream | 0.64 channel miles inside | Checked for Corps of Engineers jurisdiction |
| South Fork Dry Creek | Stream | 0.45 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Cow Pen Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Marble Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Rinard Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Creedmoor or within one mile outside the city, so a mapped rail crossing is not part of the local route picture. Cowpen Creek runs 1.92 channel miles inside the limits, and the city also has Dry Creek, Maha Creek, Elm Creek and South Fork Dry Creek. Public mapping shows 10 street crossings of named streams. A creek route needs a depth plan under the channel and a check for U.S. Army Corps of Engineers jurisdiction. For underground planning in Creedmoor, we distinguish streams such as Cowpen Creek from lakes and ponds; none are mapped within one mile.
Who approves a bore under FM 1327 in Creedmoor?
For a utility crossing beneath FM 1327, Texas State Highway 45 or FM 1625, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Austin District reviews it. Electric and communication lines need 60 inches of cover below the lowest crossed grade; water needs 60 inches, and pressurized sewer needs 60 inches. The district may set a different depth in the permit. TxDOT requires boring or tunneling beneath existing highway pavement, and rural highway bores extend beneath all travel lanes. Creedmoor’s incorporated city streets belong to the city itself. For a Cowpen Creek crossing, planning includes checking Corps jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities may already be underground in Travis County near Creedmoor?
The water provider for a specific Creedmoor address has to be confirmed with the city, the county or the local water district before a bore is planned. EPA drinking water records do not tie systems to towns, so they do not identify the provider for Williamson Road or another specific address. Utilities reporting electric service in Travis County include Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. We confirm the line owner for the address before planning an electric conduit bore, rather than assuming one provider serves every route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Travis County and Hays County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Creedmoor’s median housing year at 1986: 5 percent of homes were built before 1960, 52 percent from 1960 to 1999 and 43 percent in 2000 or later. That mix can mean a route serves older lines being replaced as well as newer connections along Turnersville Road. Before drilling near marked utilities, we hydrovac pothole each one on the bore path. A mark shows position, not depth, so exposing the line helps establish safe clearance.

How far is Creedmoor from Niederwald and our Yukon office?
Creedmoor lies mostly in Travis County, with 10 percent of the incorporated city in Hays County, and covers 7.62 square miles at an elevation of 661 feet. We route underground requests for Creedmoor in Travis County by ZIP codes 78610, 78747 and 78640. Mustang Ridge is 2.6 miles southeast, Niederwald is 6.0 miles southwest, San Leanna is 6.9 miles northwest, and Buda is 7.1 miles west. Austin, the Travis County seat, is 15.6 miles north. Our Yukon, Oklahoma main office is 419 road miles away, a 7.9 hour drive, which affects mobilization for work near FM 1327.
Places near Creedmoor
- Directional boring in Mustang Ridge: 2.6 miles southeast
- Directional boring in Niederwald: 6 miles southwest
- San Leanna: 6.9 miles northwest
- Directional boring in Buda: 7.1 miles west
- Directional boring in Manchaca: 7.3 miles northwest
What boring work comes up near Turnersville Road in Creedmoor?
- Highway crossing: A utility route beneath FM 1327 needs a planned bore profile and pits placed clear of the travel lanes.
- Water service: A service route near Williamson Road needs the address specific water provider confirmed before we plan the tie in.
- Fiber conduit: A run along Turnersville Road can use directional boring to pass beneath pavement without cutting the roadway.
- Creek crossing: A line beneath Cowpen Creek needs a channel depth plan and a jurisdiction check during planning.
- Electric conduit: Near FM 1625, we confirm the line owner and route before setting the bore path for new conduit.
- Drainage route: With 19.12 miles of unnamed drainage mapped in Creedmoor, a route near Graef Road needs site review for drainage conflicts.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Creedmoor bore near Williamson Road?
A map pin matters near Williamson Road because the exact route can place a bore close to Cowpen Creek or a highway crossing. For a Williamson Road bore, we need the address or pin, what will go underground, the pipe or conduit size, and footage. A sketch or plans help us see the intended path and spot questions about pits, pavement or nearby utilities before we shape the bore plan.
The job route, not a single measure, sets the price. Ground conditions matter because Houston Black clay can cling to the reamer; crossings matter where FM 1327 pavement or Cowpen Creek is on the path. We also account for line size and length, utilities to expose, concrete or pavement, drainage crossings, pits, excavator time and sand backfill. Creedmoor is 419 road miles from Yukon, so mobilization is part of the logistics, along with any high profile or emergency work.
Questions people ask about boring in Creedmoor
Does Trinity take directional boring work in Creedmoor and Travis County?
Yes, we take directional boring work in Creedmoor and across Texas. Our own crews and partner contractor crews vetted by Trinity can staff the work, while you deal with Trinity from the first call through the bore log. That service model applies to routes along Williamson Road or beneath FM 1327, without implying a local office.
What is Houston Black soil like for a bore in Creedmoor?
Houston Black soil is heavy clay, and the USDA soil survey maps it across 63 percent of Creedmoor. About 40 inches down, clay is mapped in 89 percent of the area. That sticky ground can build on a reamer and grip the pipe, so we stage the reaming and have the pipe ready for pullback.
Will a Creedmoor bore hit rock near the surface?
The USDA soil survey maps bedrock within five feet in 11 percent of Creedmoor, and the mapped bedrock there is weathered rather than hard. The typical mapped depth is 31 inches. That does not establish conditions at a particular bore, so the route near Cowpen Creek or FM 1327 still needs site specific planning.
Who approves a Creedmoor bore under FM 1327?
TxDOT reviews the utility permit for an FM 1327 right of way crossing through its Austin District. The utility owner submits the application in RULIS, while we prepare the bore plan and profile for that filing. The permit sets the approved route and cover requirements, including any different depth the district specifies.
Can a line be bored beneath Cowpen Creek in Creedmoor?
A line can be planned beneath Cowpen Creek, which runs 1.92 channel miles inside Creedmoor. The bore profile needs to stay under the channel, and planning checks whether the crossing is under U.S. Army Corps of Engineers jurisdiction. Site conditions and the line route determine the final approach.
Which electric utility owns the lines at a Creedmoor address in Travis County?
The address specific line owner needs confirmation before we plan a conduit bore. Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative report electric service in Travis County, but that county list does not establish which one serves Williamson Road or any other particular address.
How much notice does Texas811 need for a Creedmoor bore near Williamson Road?
For work near Williamson Road, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. For TxDOT Austin District work, we ask for a new request if the start slips more than 14 days past the original notice. Worn or moved marks need refreshing through Texas811 before work continues.
Does the distance from Buda to Creedmoor change the job from Yukon?
Buda is 7.1 miles west of Creedmoor, while our Yukon main office is 419 road miles away and a 7.9 hour drive. That distance can affect mobilization planning for a bore near FM 1327. We keep Trinity involved from the first call through the bore log, whichever vetted crew is on site.
What shapes our directional boring cost near FM 1327 in Creedmoor?
The route and scope determine the price, not the highway name by itself. Houston Black clay, bore length and pipe size affect the ground work; FM 1327 pavement, utility exposures and any Cowpen Creek crossing add route demands. Pit work, excavator time, backfill, emergency timing and mobilization from Yukon also factor into the job.
Where the Creedmoor facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Creedmoor
- U.S. Census Bureau, TIGER/Line 2024: Creedmoor boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Creedmoor
- U.S. Census Bureau, American Community Survey 2019 to 2023: Creedmoor housing units and year built
- Macrostrat geologic map compilation: map units under Creedmoor
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Travis County and Hays County
- U.S. Geological Survey, Elevation Point Query Service: Creedmoor elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Creedmoor
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Creedmoor
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Creedmoor, Texas
Type the address of your job in Creedmoor. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Creedmoor
County: Hays County directional boring. Same county: San Marcos · Kyle · Dripping Springs · Wimberley · Woodcreek · Uhland · Austin · Mountain City · Bear Creek · Hays · Driftwood · Belterra. All counties: Texas county list.
