Driftwood Texas Directional Boring: Real Soil, RM 150 and Onion Creek
Quick Answer: RM 150 is the main road crossing, and we take directional boring, also called horizontal directional drilling (HDD), work in Driftwood, Texas. Onion Creek needs a route planned around its channel rather than an open cut. Driftwood sits 423 road miles from our Yukon, Oklahoma main office, so RM 150 access affects mobilization. USDA mapping puts bedrock at about 15 inches typically, which can slow a bore and call for rock tooling.
Driftwood bores at a glance
- Unincorporated community in Hays County, Texas. Population 106 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 423 miles, about 8.3 hours of driving.
- Ground: Real soil is mapped on 36 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 89 percent of the area.
- Highways inside the boundary: RM 150. State permit office: TxDOT Austin District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Onion Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near RM 150 in Driftwood?
RM 150 is the main route to plan around for a bore in Driftwood, in Hays County. The Census Bureau counted 106 people here in 2020; it does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber, with the route set to reach a service along Elder Hill Road, Reaves Road or Heitzler Lane without cutting the road surface.
Our main office is in Yukon, Oklahoma, and Driftwood work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have prepared us for routes where the Glen Rose Limestone map unit and shallow bedrock can shape the drilling plan. Our family business started in 1965, and you work with Trinity from the first call through the bore log.

What kind of ground does Driftwood’s Real soil map show?
The USDA soil survey maps Real soil across 36% of Driftwood, including Real, Comfort and Doss complex on 1 to 8 percent slopes. Gravelly loam is the mapped surface texture across 36%; silty clay covers 28%. At about 40 inches below the surface, the survey maps bedrock across 89% of the area and clay loam across 11%. For Driftwood, we use mapped Real, Doss, Sunev, and Brackett soil patterns as planning context, not as test borings. The silty clay can cling to a reamer, while gravelly loam can loosen behind the drill head.
| USDA soil survey, inside the Driftwood mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Real 36 percent, Doss 28 percent, Sunev 11 percent, Brackett 10 percent and Comfort 10 percent |
| Texture at the surface | gravelly loam 36 percent, silty clay 28 percent and clay loam 12 percent |
| Texture about 40 inches down | bedrock 89 percent and clay loam 11 percent |
| Engineering class about 40 inches down | lean clay (CL) 11 percent |
| Average clay content about 40 inches down | 30 percent |
| Bedrock mapped within 60 inches | 89 percent of the area (15 percent hard rock, 74 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 41 percent of the area |
The survey puts typical bedrock depth at 15 inches, with weathered bedrock mapped across 74% and hard bedrock across 15% within 60 inches. The weathered material can slow drilling; harder rock may call for a rock bit, mud motor or air hammer. At Onion Creek, we treat seasonal water table and flood prone soils as unmapped and verify conditions before boring. High steel corrosion risk covers 41%, so the line owner should consider casing and tracer wire materials. The geologic map names Albian age Glen Rose Limestone; route conditions still need checking along Onion Creek.
How do crews bore Driftwood’s shallow bedrock?
Real soil and shallow bedrock call for a route specific plan in Driftwood. We locate and expose marked utilities first, then track the drill head and adjust tooling to what the route reveals near RM 150.
- At a Real soil route, we check the mix of gravelly loam and silty clay before choosing reaming steps, since loose material and sticky clay behave differently.
- Where Driftwood’s mapped bedrock is shallow, we track depth and pitch as the bore advances and switch to rock tooling if hard material demands it.
- Near Elder Hill Road, we hydrovac marked utilities on the planned path; surface paint shows position, not depth, so we expose lines before drilling close by.
- For an Onion Creek crossing, we plan the bore beneath the channel and check for federal jurisdiction during planning, keeping pits on the ground at either end.

Which roads and creeks can a Driftwood bore cross near Onion Creek?
RM 150 is the state highway mapped inside the Driftwood community boundary, with 2.4 roadway miles there. TxDOT requirements apply to work in its right of way. Elder Hill Road is the longest named street at 0.7 miles, followed by Reaves Road at 0.29 miles and Heitzler Lane at 0.24 miles. Those short street segments make entry and exit pit placement part of the route plan, especially where a bore must pass beneath a road without opening its surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| RM 150 | State highway | 2.4 roadway miles inside | State highway office |
| Onion Creek | Stream | 0.19 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Jackson Branch | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Rocky Branch | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Gatlin Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Pier Branch | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside the community or within one mile outside it, and no street and rail crossing is mapped. Onion Creek runs 0.19 channel miles inside the boundary, with one mapped street crossing of a named stream. For crossings along RM 150, we account for the map showing no lakes or ponds within one mile and check site conditions before boring. A creek route needs its depth planned beneath the channel, and during planning the crossing is checked for U.S. Army Corps of Engineers jurisdiction.
Who permits a Driftwood bore in Hays County?
Driftwood is an unincorporated census designated place, so it has no city government to issue street permits; authority for a street depends on whether it is county or state right of way. For RM 150 right of way work, the line owner, not the driller, submits the utility permit through TxDOT’s RULIS system. We prepare the bore plan and profile for the owner, and the TxDOT Austin District reviews the application. TxDOT cover rules include 60 inches at highway crossings for electric, communication and water lines. Onion Creek crossings are checked for federal water jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose utility lines serve Driftwood in Hays County?
The water provider for a specific Elder Hill Road address has to be confirmed with the city, Hays County or the local water district before a bore is planned. EPA drinking water records do not tie a system to Driftwood, so the address needs verification rather than an assumption about who serves it. Utilities reporting electric service in Hays County include the City of San Marcos, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. We confirm the line owner before planning a conduit bore near Reaves Road.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of San Marcos, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Hays County | EIA Form 861 | Confirm the line owner by address |
The 2019 to 2023 five year estimates place Driftwood’s median housing year at 1998; we use that context when planning underground work. It estimates 64% of homes were built from 1960 to 1999 and 36% in 2000 or later. That mix can mean a bore is for replacing an existing line or bringing a newer service to a property along Heitzler Lane. Paint shows a marked utility’s position, not its depth, so we hydrovac pothole marked lines on the bore path before drilling near them.

Do you cover Driftwood and nearby Dripping Springs?
Driftwood is in Hays County at an elevation of 1,060 feet and covers 1.29 square miles. Its ZIP code is 78619. Belterra is 5.0 miles northeast, and Dripping Springs is 5.5 miles northwest. San Marcos, the county seat, is 18.9 miles south; Belterra is the nearest larger place listed, 5.0 miles northeast. From our Yukon, Oklahoma main office, Driftwood is 423 road miles away and an 8.3 hour drive. That distance is part of planning mobilization for work near RM 150.
Places near Driftwood
- Directional boring in Belterra: 5 miles northeast
- Directional boring in Dripping Springs: 5.5 miles northwest
- Directional boring in Bear Creek: 6.7 miles northeast
- Directional boring in Woodcreek: 8.6 miles southwest
- Directional boring in Hays: 9.9 miles east
Which jobs call for a bore near Driftwood’s Heitzler Lane?
- Highway crossing: A bore below RM 150 needs a route and pits planned for the state right of way and its pavement.
- Water service: A service bore near Elder Hill Road needs the address specific water provider confirmed before we plan the connection.
- Fiber conduit: A fiber route along Reaves Road can pass beneath a drive or road surface without an open cut.
- Creek crossing: A line below Onion Creek needs a channel crossing plan and a jurisdiction check during planning.
- Electric conduit: A conduit route near Heitzler Lane starts with confirming the line owner and exposing marked utilities.
- Replacement bore: A replacement service near Reaves Road can use a bore route to avoid cutting the existing road surface.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for work near Driftwood’s Elder Hill Road?
For a quote near Elder Hill Road, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help us lay out the route. Include any planned crossing of RM 150 or Onion Creek, since those features can change access and the bore profile.
A short route through accessible ground near Heitzler Lane is simpler to plan than a crossing under RM 150 or Onion Creek. Length, pipe size, Real soil and the shallow bedrock all affect the work. We also account for utilities to expose, pavement or concrete, creek crossings, pits, excavator time and sand backfill. Driftwood’s 423 road miles from Yukon affect mobilization, while high profile or emergency work can add planning needs.
Questions people ask about boring in Driftwood
Does Trinity Boring Solutions take jobs in Driftwood and Hays County?
Yes. We take directional boring work in Driftwood, Hays County, and across Texas. Our own crews and partner contractor yards we have vetted can staff the work, while you deal with Trinity from the first call through the bore log. For a route near RM 150, the work plan still depends on the address, access and utility marks.
Who approves a bore under RM 150 in Driftwood?
For work in RM 150 right of way, the utility line owner files the permit application through TxDOT’s RULIS system. The TxDOT Austin District reviews it. We prepare the bore plan and profile for the line owner, who holds the permit. The route beneath RM 150 also has to meet the cover depth set for the utility type and any permit conditions.
Can a line be bored under Onion Creek in Driftwood?
A line can be planned beneath Onion Creek, which runs 0.19 channel miles inside the community boundary. The route needs enough depth to pass below the channel, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. A site review helps set the bore path and pit locations without cutting across the creek bank.
Who owns electric lines in Driftwood, Hays County, and who confirms conduit specs?
Hays County electric service is reported by the City of San Marcos, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. Those county reports do not identify the provider at every Driftwood address. The line owner for the specific route near Elder Hill Road should be confirmed before conduit specifications and the bore plan are set.
Who is in charge of Heitzler Lane in Driftwood, and does it need to be cut?
Driftwood has no city government, so responsibility for Heitzler Lane depends on whether that segment is county or state right of way. A directional bore can pass below the street without an open cut, subject to the route and applicable approval. Heitzler Lane is mapped for 0.24 miles inside the community boundary.
How old are buried lines near Reaves Road in Driftwood, and what does that mean for replacement?
The American Community Survey 2019 to 2023 estimates put Driftwood’s median housing year at 1998, with 64% built from 1960 to 1999 and 36% in 2000 or later. Those figures describe housing, not buried line age. For a replacement bore near Reaves Road, marked utilities on the route need to be exposed before drilling close to them.
What bore sizes and lengths can Trinity handle for a Driftwood, Hays County job?
We handle lines from 3/4 inch service size up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The right setup for a Driftwood route depends on the line, ground and crossings. A route under RM 150 or near the mapped bedrock may need different planning than a short service bore.
How much notice does Texas811 need before a bore by Elder Hill Road in Driftwood?
For a bore by Elder Hill Road, request utility locates through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For work under RM 150, if our start slips more than 14 days past the original notice, we submit a new request to the TxDOT Austin District. Before continuing boring work near Elder Hill Road, we have worn or moved marks refreshed through Texas811.
What affects the price of a directional bore under RM 150 in Driftwood?
The job scope drives the price, including bore length and size, ground conditions, utility exposure, pavement, pits and any creek crossing. Real soil and shallow bedrock can affect tooling and drilling time near RM 150. Mobilization also reflects Driftwood’s 423 road miles from our Yukon, Oklahoma main office; the route and access determine the actual work involved.
Where the Driftwood facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Driftwood
- U.S. Census Bureau, TIGER/Line 2024: Driftwood boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Driftwood population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Driftwood housing units and year built
- Macrostrat geologic map compilation: map units under Driftwood
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hays County
- U.S. Geological Survey, Elevation Point Query Service: Driftwood elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Driftwood
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Driftwood
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Driftwood, Texas
Type the address of your job in Driftwood. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Driftwood
Same county: San Marcos · Kyle · Buda · Wimberley · Uhland · Austin · Mountain City · Niederwald · Creedmoor. All counties: Texas county list.
