Blossom Texas Directional Boring: Freestone Soil, US 82 and Cuthand Creek
Quick Answer: Blossom is a small incorporated city, so the city owns Front Street and its other city streets. We take directional boring, also called horizontal directional drilling (HDD), in Texas for crossings such as Cuthand Creek. Blossom is 245 road miles from our Yukon, Oklahoma main office, with US 82 running through the city. Freestone soil and the mapped heavy clay at about 40 inches can grip the pipe, so the ream and pull need control.
Blossom bores at a glance
- Incorporated city in Lamar County, Texas. Population 1,478 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 245 miles, about 4.7 hours of driving.
- Ground: Freestone soil is mapped on 32 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 82, FM 196 and FM 194. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Cuthand Creek.
- Public water: City of Blossom, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Front Street in Blossom?
Blossom is a small incorporated city in Lamar County, and the Census Bureau Vintage 2024 estimate lists 1,478 residents. We install water and sewer lines, gas lines, electric conduit and fiber along routes that can follow Front Street, North Street or Division Street. Those streets help anchor a route review before we plan the bore.
Our main office is in Yukon, Oklahoma, and Blossom work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record we bring to planning around the City of Blossom water system and electric providers reporting in Lamar County. We are a family business started 1965 and have done directional boring since 1982.

What kind of ground does Blossom Freestone soil map?
The USDA soil survey maps Freestone soil series across 32 percent of Blossom, with Annona at 26 percent. Surface textures include fine sandy loam across 32 percent and silt loam across 26 percent. At about 40 inches below the surface, clay is mapped across 61 percent and clay loam across 32 percent; average clay content there is 45 percent. Our Freestone, Annona, Derly, and Deport patterns are mapped soil units, not test borings for underground work in Blossom. For a bore, the heavy clay can cling to the reamer and grip pipe during pullback.
| USDA soil survey, inside the Blossom city limits | What is mapped |
|---|---|
| Soil series mapped | Freestone 32 percent, Annona 26 percent, Derly 12 percent, Deport 8 percent and Wilson 8 percent |
| Texture at the surface | fine sandy loam 32 percent, silt loam 26 percent and loam 26 percent |
| Texture about 40 inches down | clay 61 percent, clay loam 32 percent and silty clay loam 5 percent |
| Engineering class about 40 inches down | fat clay (CH) 80 percent and lean clay (CL) 17 percent |
| Average clay content about 40 inches down | 45 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 57 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 98 percent of the area |
In Blossom, our Freestone and Annona soil maps do not show bedrock in the top five feet, but deeper rock remains possible. The geologic map shows Blossom Sand, a Late Cretaceous unit described as fine sand grading west to clay, with thin clay interbeds. A seasonal water table is mapped within 60 inches across 57 percent of the area, so pits may need pumping. Flood prone soils cover 5 percent, while high steel corrosion risk is mapped across 98 percent; the line owner should consider casing and tracer wire materials.
How do crews bore Blossom clay?
Blossom soil maps show heavy clay at about 40 inches and a seasonal water table across 57 percent of the area. We adjust fluid, reaming and pit work to keep the bore controlled.
- With clay mapped across 61 percent of Blossom at about 40 inches, we use thinner drilling fluid and polymer, then ream in stages to manage sticky cuttings.
- Heavy clay covers much of the mapped subsurface, so we watch fluid returns near pavement and keep pressure low enough to avoid lifting a street surface.
- A seasonal water table is mapped within 60 inches across 57 percent of Blossom; we plan small pits and pumping where wet ground fills them.
- At Cuthand Creek, we plan depth below the channel and check jurisdiction during planning; the drill head is tracked and its depth and pitch logged.

Which roads or creeks can a Blossom bore cross near Cuthand Creek?
US 82 runs through Blossom, along with FM 196 and FM 194. A bore beneath existing highway pavement is installed by boring or tunneling, leaving the surface uncut. Front Street is the longest named street in the city at 1.78 miles, followed by North Street at 1.48 miles and Bois d’Arc Street at 1.33 miles. Division Street runs 1.3 miles. These routes give us specific places to consider access, pavement and the utilities that a proposed bore may cross.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 82 | US highway | 2.7 roadway miles inside | State highway office |
| FM 196 | State highway | 2.1 roadway miles inside | State highway office |
| FM 194 | State highway | 1.3 roadway miles inside | State highway office |
| Cuthand Creek | Stream | 1.13 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bee Bayou | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Nolan Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Ninemile Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
| City Lake | Lake or pond | 27 acres, inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Blossom or within one mile outside its limits, and no street and rail crossings are mapped in the city. Cuthand Creek runs 1.13 channel miles inside Blossom, where two street crossings of named streams are mapped. City Lake is also inside the city limits. A bore plan near Cuthand Creek or City Lake needs to account for the water crossing and check for federal jurisdiction during planning.
Whose permission does a Blossom bore under US 82 need?
For a bore in the US 82, FM 196 or FM 194 right of way, the line owner files the TxDOT utility permit through RULIS, not the driller. We prepare the bore plan and profile for that filing and work under the permit issued to the owner; the TxDOT Paris District reviews it. TxDOT cover rules set 60 inches for electric and communication lines at crossings and 48 inches along the right of way. Water lines need 60 inches at crossings and 36 inches along it; pressurized sewer crossings need 60 inches. A creek route at Cuthand Creek is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Lamar County near Blossom?
The City of Blossom public water system uses purchased surface water and reports 696 service connections serving 2,007 people. Electric service reported in Lamar County includes Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative and Lamar County Electric Cooperative Association. Those county listings do not identify the provider at every Blossom address, so we confirm the line owner before planning an electric conduit bore near Front Street or US 82.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Blossom | Public water system | Surface water bought from another system | 696 connections, 2,007 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative and Lamar County Electric Cooperative Association | Electric utilities reporting service in Lamar County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Blossom’s median housing year at 1985: 13 percent of homes were built before 1960, 63 percent from 1960 to 1999 and 24 percent in 2000 or later. That mix can mean either replacement work or a new service. We hydrovac pothole every marked utility on the bore path before the drill approaches; for a proposed line under Front Street, paint shows position, not depth.

Where is Blossom in relation to Sun Valley?
Blossom is in Lamar County at an elevation of 518 feet and covers 2.55 square miles. Its ZIP code is 75416. Sun Valley is 2.6 miles west, and Reno is 5.5 miles west. Paris, the county seat and nearest larger city, is 9.4 miles west. From our Yukon, Oklahoma main office, Blossom is 245 road miles and a 4.7 hour drive, which informs our boring logistics. Those distances matter when we plan crew mobilization for work near US 82 or Cuthand Creek.
Places near Blossom
- Directional boring in Sun Valley: 2.6 miles west
- Reno: 5.5 miles west
- Directional boring in Detroit: 6.7 miles east
- Directional boring in Paris: 9.4 miles west
- Directional boring in Deport: 10 miles south
What kinds of bores come up near Front Street in Blossom?
- Highway crossing: A route under US 82 uses a bore beneath the travel lanes, with the line owner handling the TxDOT permit.
- Water service: A connection near Front Street can tie into planning for the City of Blossom system, which uses purchased surface water.
- Fiber route: A conduit path along Division Street can avoid cutting the street surface while reaching homes or other endpoints.
- Creek crossing: A line beneath Cuthand Creek needs a planned path below the channel and a jurisdiction check during planning.
- Electric conduit: Near FM 196, we confirm the address specific line owner before planning a conduit route through the right of way.
- Drainage crossing: A route near City Lake or Blossom’s unnamed drainage may need pits placed in dirt beyond the crossing.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Blossom quote near Division Street?
For a route near Division Street, send the address or map pin first. Tell us what will go in the ground, such as water, sewer or fiber, then give the pipe or conduit size and the footage. A sketch or plans help show nearby streets, US 82, Cuthand Creek and the proposed pit locations.
Freestone soil and the heavy clay mapped at about 40 inches make ground conditions the first price factor: clay can cling to the reamer and grip pipe. Length and pipe size set the bore scope, while crossings and exposures matter near US 82 and Cuthand Creek. Pavement, pits, excavator time and sand backfill also affect the work. Mobilization is part of the estimate because Blossom is 245 road miles from Yukon.
Questions people ask about boring in Blossom
Does Trinity Boring Solutions take jobs in Blossom and Lamar County?
Yes. We take directional boring work across Texas, including possible crossings near Front Street in Blossom. Our own crews and partner drilling contractors from vetted satellite yards staff the work, while you coordinate with Trinity from the first call through the bore log. That keeps the planning for a Front Street route connected to the crew on site.
What is Freestone soil like for a bore in Blossom?
The USDA soil survey maps Freestone across 32 percent of Blossom. At about 40 inches below the surface, clay covers 61 percent and clay loam 32 percent. These are mapped patterns rather than test borings; the sticky clay can collect on a reamer and hold against pipe during pullback.
Will we hit rock with a bore in Blossom beneath the Freestone soil series?
Our Deport and Derly soil maps for Blossom do not show bedrock in the top five feet, though we cannot rule out deeper rock. The geologic map identifies Blossom Sand, a Late Cretaceous unit described as sand grading west to clay. We use the route and site conditions to plan rather than treating the map as a subsurface test.
Who approves a Blossom bore under US 82?
The line owner applies for the TxDOT utility permit through RULIS, and the TxDOT Paris District reviews it. We prepare the bore plan and profile for the owner’s application and work under its permit. Cover requirements depend on the line type and whether it crosses or runs along the US 82 right of way.
Can you bore a line under Cuthand Creek in Blossom?
A bore can be planned beneath Cuthand Creek, which runs 1.13 channel miles inside Blossom. The route needs to stay below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Site conditions and the line owner’s requirements shape the final profile.
Who runs Blossom’s water system, and where does the water come from?
The City of Blossom owns a public water system using purchased surface water, and we plan underground work near Center Street with utility coordination in mind. Public records list 696 service connections and 2,007 people served in Blossom; we use those figures to inform underground utility planning. For a new or replacement line near Division Street, we still need the address and route to plan around the existing system.
What bore sizes and lengths can Trinity handle for a Blossom job near Division Street?
We handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet for crossings on Bois d’Arc Street. A proposed route near Division Street still needs its pipe or conduit size, length and crossing details so we can match the equipment and plan to the scope.
How much notice does Texas811 need for a bore near Front Street in Blossom?
For a bore near Front Street, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If a Blossom start on Fairview Street moves more than 14 days past the original notice, we make a new request. Before work continues near Cedar Street in Blossom, we have worn or moved marks refreshed through Texas811.
What affects the cost of a directional bore under US 82 in Blossom, including coordination with the TxDOT Paris District?
For a US 82 crossing in Blossom, the job scope sets our price and defines the work we plan. Freestone soil and heavy clay affect drilling and pullback; the pipe size and bore length set the work involved. US 82 or Cuthand Creek crossings, exposed utilities, pavement, pits, excavator time and sand backfill can also change the scope. Mobilization matters because Blossom is 245 road miles from Yukon.
Where the Blossom facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Blossom
- U.S. Census Bureau, TIGER/Line 2024: Blossom boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Blossom
- U.S. Census Bureau, American Community Survey 2019 to 2023: Blossom housing units and year built
- Macrostrat geologic map compilation: map units under Blossom
- U.S. EPA Safe Drinking Water Information System: public water systems serving Blossom
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Lamar County
- U.S. Geological Survey, Elevation Point Query Service: Blossom elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Blossom
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Blossom
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Blossom, Texas
Type the address of your job in Blossom. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
