trinityboringsolutions.com

Reno Texas Directional Boring: Windthorst Soil, FM 2257 and Walnut Creek

Quick Answer: From our Yukon yard, Reno is 210 road miles away, and Jay Bird Lane work is staffed by our crews and vetted partner crews. Along Walnut Creek or FM 2257, Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Reno, Texas. Windthorst soil is common here, and sandy clay loam about 40 inches down can hold the bore open but grip the pipe. That ground and the 6 mapped street crossings of named streams make route and fluid planning matter around Reno.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Reno bores at a glance

  • Incorporated city in Parker County, Texas. Population 3,650 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 210 miles, about 4.4 hours of driving.
  • Ground: Windthorst soil is mapped on 31 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 39 percent of the area.
  • Highways inside the boundary: FM 2257, Texas State Highway 199 and FM 1542. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Walnut Creek, Cottonwood Branch and Briar Creek.
  • Public water: City of Reno, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Reno, Parker County?

Yes, Trinity Boring Solutions takes directional boring work in Reno, Parker County, where the Census Bureau Vintage 2024 estimate puts the population at 3,650. From our Yukon yard, Reno is 210 road miles away, so the job is staffed by our crews or partner crews we vet. Along Reno Road, Walnut Creek approaches and FM 2257 routes, we install water, sewer, gas, electric conduit and fiber lines by directional boring.

Our main office is in Yukon, Oklahoma, and Reno work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, we have focused on directional boring; four decades of practice help us plan for Reno’s Windthorst and Duffau soils. Our family business began in 1965, and the mapped ground here is part of that planning.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does a Reno bore meet in Windthorst soil?

Reno bores can pass through Windthorst and Duffau soils, with sandy clay loam common about 40 inches below the surface. The USDA soil survey maps Windthorst across 31% of the city and Duffau across 24%. At about 40 inches, sandy clay loam covers 44% of the mapped area, while sandy clay covers 24%; average clay content there is 26%. Across Reno, we use the mapped Windthorst and Duffau soil patterns to plan boring depths, not treat them as test borings. Clay can hold a bore open, but it can also stick to a reamer and grip pipe, so the route may call for staged reaming and a prompt pull.

USDA soil survey, inside the Reno city limitsWhat is mapped
Soil series mappedWindthorst 31 percent, Duffau 24 percent, Selden 11 percent, Santo 10 percent and Keeter 6 percent
Texture at the surfacefine sandy loam 50 percent, loamy fine sand 20 percent and very fine sandy loam 8 percent
Texture about 40 inches downsandy clay loam 44 percent, sandy clay 24 percent and very fine sandy loam 13 percent
Engineering class about 40 inches downlean clay (CL) 71 percent, silty clayey sand (SC SM) 10 percent and silty clay (CL ML) 8 percent
Average clay content about 40 inches down26 percent
Bedrock mapped within 60 inches39 percent of the area (3 percent hard rock, 37 percent weathered rock)
Seasonal water table within 60 inches17 percent of the area
Flood prone soils14 percent of the area
High corrosion risk for uncoated steel17 percent of the area

The USDA soil survey maps bedrock within 60 inches across 39% of Reno, including weathered bedrock across 37% and hard bedrock across 3%; typical mapped depth is 39 inches. Seasonal water table is mapped within 60 inches across 17%, and flood prone soils across 14%, so Walnut Creek routes need depth and pit planning. High steel corrosion risk is mapped across 17%, a concern to discuss for casing and tracer wire. The geologic map identifies Aptian age Paluxy Sand, described as sand, mudstone and limestone, so ground conditions can change along a bore.

How do we drill Reno’s sandy clay loam along FM 2257?

For Reno’s sandy clay loam and clay, we set the bore plan around the route and manage the hole as it is opened. Walnut Creek and the mapped soil changes make fluid and depth control important.

  1. In Windthorst and Duffau clay, we adjust drilling fluid and ream in stages so sticky material does not build up on the reamer or grip the pipe.
  2. Where Reno’s sandy clay loam turns to loamy fine sand, we manage the hole so loose ground does not cave in behind the drill head.
  3. For a Walnut Creek crossing, we plan depth beneath the channel and check the route for possible U.S. Army Corps of Engineers jurisdiction.
  4. At FM 2257 or a named street, we track the drill head from the surface and log depth and pitch as the bore advances.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Where might a Reno bore go under Walnut Creek?

Reno bores may need to pass beneath FM 2257, Texas State Highway 199 or FM 1542, all mapped within the city. The mapped roadway lengths inside city limits are 7.4 miles for FM 2257, 4.6 miles for Texas State Highway 199 and 2.1 miles for FM 1542. Reno Road is the longest named street at 5.29 miles, followed by Cardinal Road at 4.06 miles and Knob Hill Road at 3.95 miles. Those routes help define where access, pavement and utility exposure need attention.

CrossingTypeMapped extentWho has a say
FM 2257State highway7.4 roadway miles insideState highway office
Texas State Highway 199State highway4.6 roadway miles insideState highway office
FM 1542State highway2.1 roadway miles insideState highway office
Walnut CreekStream5.68 channel miles insideChecked for Corps of Engineers jurisdiction
Cottonwood BranchStream2.5 channel miles insideChecked for Corps of Engineers jurisdiction
Briar CreekStream0.23 channel miles insideChecked for Corps of Engineers jurisdiction
Swift BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Ash CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Reno or within 1 mile outside the city limits, and no street and rail crossings are mapped, so there is no mapped local track route to plan around. Walnut Creek has 5.68 channel miles within the city; Cottonwood Branch has 2.5 and Briar Creek has 0.23. Public records map 6 street crossings of named streams in Reno. A creek route needs depth planning, and its crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a Reno bore beneath FM 2257?

For a bore in the FM 2257 right of way, the utility that owns the line files the TxDOT utility permit in RULIS; we give that owner the bore plan and profile. TxDOT’s Fort Worth District reviews the application. Under FM 2257, electric and communication lines need 60 inches of cover at a crossing and 48 inches when running along the right of way; water needs 60 inches at a crossing and 36 inches alongside, while pressurized sewer needs 60 inches at a crossing. The permit can set another depth. TxDOT requires boring or tunneling beneath existing highway pavement, with casing at crossings and rural highway bores extending beneath all travel lanes. Because Reno is incorporated, we coordinate boring plans around city streets such as Cardinal Road and Reno Road.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Reno near the City of Reno system?

The City of Reno public water system is locally owned and uses purchased surface water. Public records list 1,182 service connections and 3,526 people served, which helps frame water work near Reno Road and Jay Bird Lane. Utilities reporting electric service in Parker County include Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric Cooperative. We confirm the line owner for the address before planning an electric conduit bore; the county list does not identify the provider at every Reno property.

Line ownerWhat it isSourceSize
City of RenoPublic water systemSurface water bought from another system1,182 connections, 3,526 people served
Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Parker CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Reno’s median housing year at 1992: 8% of homes were built before 1960, 57% from 1960 to 1999 and 35% in 2000 or later. On Jay Bird Lane, that mix can mean a project is a replacement or a new service, but it does not show what is buried at a specific address. We hydrovac pothole marked utilities on the bore path before drilling near them, since locate marks show position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is Reno from Azle and our Yukon yard?

Reno is in Parker County, about 4.0 miles northwest of Azle, the nearest larger city listed in public records. The incorporated city covers 13.19 square miles at an elevation of 760 feet, with ZIP codes 76020 and 76082. Sanctuary is 2.8 miles southwest; Pelican Bay is 3.3 miles southeast. Weatherford, the county seat, is 18.0 miles southwest. From our Yukon, Oklahoma yard, Reno is 210 road miles and a 4.4 hour drive, so distance is part of planning crew and equipment mobilization.

Places near Reno

What kinds of bores come up along Reno Road?

  • Highway crossing: A route beneath FM 2257 needs a bore plan that accounts for pavement, required cover and the road’s full travel lanes.
  • Water service: A service near the City of Reno system can connect a new line or replace an existing one along Reno Road.
  • Fiber conduit: A run beside Knob Hill Road can use a bore to avoid cutting the street surface along the route.
  • Creek crossing: A Walnut Creek bore needs depth planning below the channel and a check for federal jurisdiction during planning.
  • Street crossing: A route beneath Jay Bird Lane can keep the pavement intact while pits sit in the dirt on each side.
  • Electric conduit: Before a bore near FM 1542, we confirm the line owner and expose marked utilities along the planned path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Reno bore near Jay Bird Lane?

Send a map pin for the spot on Jay Bird Lane or near Walnut Creek; the exact route matters where streets and stream crossings meet. We also need to know what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us check the route and prepare a useful scope.

The job itself sets the price: length, pipe or conduit size, soil and rock, utility crossings, pavement, creek crossings, pits and excavator time all matter. Reno’s Windthorst and Duffau soils can affect drilling and reaming; a Walnut Creek crossing brings added route planning. Work beneath FM 2257 has highway permit and cover requirements to plan around. Mobilization also reflects the 210 road miles from Yukon, and emergency or high profile work can add planning needs.

Questions people ask about boring in Reno

Does Trinity take directional boring jobs in Reno, Parker County?

Yes, we take directional boring work in Reno, Parker County, and the job stays with Trinity from the first call through the bore log. Our own crews or partner drilling contractors we have vetted handle the field work. Reno is 210 road miles from our Yukon yard, so we plan staffing and equipment for the trip.

What ground should I expect for a Reno bore through Windthorst soil?

The USDA soil survey maps Windthorst across 31% of Reno, with fine sandy loam common at the surface. About 40 inches down, sandy clay loam covers 44% of the mapped area. Clay can keep a hole open but stick to tooling or grip pipe, so a bore near Windthorst soils may need staged reaming and careful fluid control.

Is there rock near the surface on a Reno bore?

Rock is mapped within 60 inches across 39% of Reno, including weathered bedrock across 37% and hard bedrock across 3%. The soil survey puts typical bedrock depth at 39 inches. Along a route near Cottonwood Branch, those maps are a planning signal, not a test at the exact bore location.

Who approves a Reno bore crossing FM 2257?

The line owner applies for the TxDOT utility permit through RULIS, and TxDOT’s Fort Worth District reviews it. We provide the bore plan and profile for the owner’s filing. A crossing beneath FM 2257 must be planned for the applicable cover depth, casing and highway pavement requirements.

Can you bore a line under Walnut Creek in Reno?

A bore under Walnut Creek can be planned, with the route and depth set to pass beneath the channel. Walnut Creek has 5.68 channel miles inside Reno, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Site conditions and the line route determine the specific plan.

Who runs Reno’s water system in Parker County, and where do we find its source?

The City of Reno owns the public water system, which uses purchased surface water. For Reno underground work, we account for 1,182 service connections serving 3,526 people when planning around its public water network. For a bore near the City of Reno system, we still confirm the water line owner and the exact route before planning the work.

Can I reach Trinity after hours for an urgent bore near Knob Hill Road in Reno?

Yes, Trinity answers the phone 24 hours a day at (405) 409-7423 for urgent work near Knob Hill Road or elsewhere in Reno. Tell us where the issue is and what line is involved so we can discuss the immediate scope and response.

How much notice does Texas811 need for a Reno Road bore, and what about worn marks?

For a bore along Reno Road, request a locate at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays. The request cannot be made more than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request; ask Texas811 to refresh marks that wear off or move before work resumes.

What affects the cost of a Reno bore near FM 2257?

Length, pipe or conduit size, soil and rock, exposed utility crossings, pavement, pits and creek work all affect a Reno bore’s price. A route through Windthorst soil or beneath FM 2257 can change the drilling and planning scope. Mobilization from the Yukon yard also matters because Reno is 210 road miles away.

Where the Reno facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Reno

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Reno, Texas

Type the address of your job in Reno. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Reno

County: Lamar County directional boring. Same county: Paris · Blossom · Powderly · Roxton · Deport · Toco · Sun Valley · Brookston · Petty · Weatherford · Willow Park · Aledo. All counties: Texas county list.