Toco Texas Directional Boring: Crockett Loam, US 82 and South Branch
Quick Answer: US 82 is the highway constraint: Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Toco, Texas, for routes that need to pass beneath it. County Road 32180 is one local route to locate before setting pits. Toco is 241 road miles from our Yukon, Oklahoma main office, so distance can affect mobilization. Crockett loam gives way to heavy clay below, where sticky cuttings call for controlled fluid and staged reaming.
Toco bores at a glance
- Incorporated city in Lamar County, Texas. Population 93 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 241 miles, about 4.6 hours of driving.
- Ground: Crockett soil is mapped on 95 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 95 percent of the area.
- Highways inside the boundary: US 82. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone handle directional boring on County Road 32180 in Toco?
In Toco, Lamar County, the Census Bureau Vintage 2024 estimate puts the population at 93. We take work for water, sewer, gas, electric conduit and fiber, routing each line along a defined path such as County Road 32180 or Sunset Drive. The route and existing crossings determine where pits can sit and what must be exposed first.
Our main office is in Yukon, Oklahoma, and Toco work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years; that record matters where a new bore meets existing lines along County Road 32180. Oncor Electric Delivery Company reports service in Lamar County, but the line owner for a specific route must be confirmed. For directional boring near US 82 in Toco, our family business brings a history that began in 1965 and directional boring experience since 1982.

What does the USDA soil survey show about Toco and Crockett soil?
The USDA soil survey maps Crockett loam across 95% of Toco and Wilson silt loam across 5%. Crockett and Wilson soil patterns in Toco are mapped references, not test borings, so we verify subsurface conditions before selecting a boring approach. At about 40 inches below the surface, the mapped texture is clay across the area, with average clay content of 44%. That heavy clay can cling to a reamer and grip the pipe, so a bore plan needs controlled drilling fluid and staged reaming. The map shows no sandy area at that depth, so we would not plan around a sand profile based on these local soil data.
| USDA soil survey, inside the Toco city limits | What is mapped |
|---|---|
| Soil series mapped | Crockett 95 percent and Wilson 5 percent |
| Texture at the surface | loam 95 percent and silt loam 5 percent |
| Texture about 40 inches down | clay 100 percent |
| Engineering class about 40 inches down | fat clay (CH) 100 percent |
| Average clay content about 40 inches down | 44 percent |
| Bedrock mapped within 60 inches | 95 percent of the area (0 percent hard rock, 95 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The soil map places weathered bedrock within 60 inches across 95% of Toco, with typical depth at 53 inches; hard bedrock is not mapped within that depth. Weathered rock can slow the bit compared with dirt. Seasonal water table and flood prone soils are not mapped in the city. High steel corrosion risk covers the mapped area, so the line owner should consider casing and tracer wire materials; HDPE is not affected by soil corrosion. The geologic map names Blossom Sand, a Late Cretaceous unit of sandstone, siltstone and mudstone, which can mean changing material along a route.
How do we bore Toco clay without losing control of the hole?
Crockett soil and clay mapped below about 40 inches call for a measured approach. Along County Road 32180, we plan the fluid, reaming sequence and utility exposures around the actual route.
- On Crockett clay, we use a thinner fluid with polymer and open the hole through staged reaming to limit sticky buildup on the tooling.
- Because heavy clay is mapped below about 40 inches, we watch fluid returns closely so pressure does not lift pavement on a route such as US 82.
- We pothole marked utilities on a County Road 32180 bore path before drilling near them, since locate paint gives position but not depth.
- A surface walkover locator tracks the drill head and records depth and pitch; near weathered bedrock mapped in Toco, we advance with care.

Which roads, tracks or creeks could a Toco bore cross near South Branch?
US 82 has 0.5 mapped roadway miles inside Toco, so a route in its right of way needs highway planning. County Road 32180 is the longest named street in the city at 0.28 miles; Sunset Drive measures 0.19 miles and Rose Drive 0.14 miles. These short local roads still need a route that places the entry and exit pits clear of pavement and marked utilities. A bore can pass beneath pavement rather than cut across it.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 82 | US highway | 0.5 roadway miles inside | State highway office |
| South Branch | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Pine Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad lies inside Toco or within 1 mile outside its limits, and no street and rail crossing is mapped. No named stream runs inside the city; South Branch is 0.5 miles from the limits and Pine Creek is 1.0 mile away. The city has 0.28 miles of unnamed drainage, with no mapped street crossing of a named stream. A planned creek route is checked for federal water jurisdiction, and no lake or pond is mapped within 1 mile.
Who approves a Toco bore beneath US 82?
Toco is incorporated, so its city streets, including Rose Drive and County Road 32180, belong to the city. Work in the US 82 right of way needs a TxDOT utility permit reviewed by the TxDOT Paris District. The utility owner files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. For an electric or communication crossing, the state cover rule calls for 60 inches below the lowest crossed grade, or 48 inches along the right of way. Water and pressurized sewer have their own crossing depths. Existing highway pavement is bored or tunneled, and a South Branch route is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Toco in Lamar County?
EPA drinking water records do not identify the provider serving a specific Toco address. Confirm that provider with the city, Lamar County or the local water district before planning a bore near County Road 32180. Utilities reporting electric service in Lamar County are Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative and Lamar County Electric Cooperative Association. Those reports do not establish which company owns a line at a particular address, so we confirm the owner before planning an electric conduit bore along Sunset Drive.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative and Lamar County Electric Cooperative Association | Electric utilities reporting service in Lamar County | EIA Form 861 | Confirm the line owner by address |
Housing data are not published reliably for a place as small as Toco, so the age of homes and buried lines along Sunset Drive cannot be inferred from a local survey. A small city can still have service lines following County Road 32180, and the specific water provider needs confirmation before work. Lamar County averages 47.7 inches of precipitation a year, with May averaging 5.4 inches, so timing and site conditions matter. We hydrovac pothole marked water and electric lines on the bore path before drilling near them; paint shows position, not depth.

What is near Toco, and where do we work around Paris?
Toco is in Lamar County, at an elevation of 569 feet, and covers 0.17 square miles. Its ZIP code is 75421. Brookston is 3.6 miles southwest, while Paris is 6.0 miles east and is both the county seat and the nearest larger city. Roxton is 8.7 miles southwest, Petty is 9.5 miles west, and Reno is 9.8 miles east. From our Yukon, Oklahoma main office, Toco is 241 road miles away and a 4.6 hour drive. That distance can affect mobilization for work on US 82 or a local street.
Places near Toco
- Directional boring in Brookston: 3.6 miles southwest
- Directional boring in Paris: 6 miles east
- Directional boring in Roxton: 8.7 miles southwest
- Directional boring in Petty: 9.5 miles west
- Reno: 9.8 miles east
What boring work could come up on Sunset Drive in Toco?
- Highway crossing: A route beneath US 82 needs a planned bore profile and pits placed outside the pavement work area.
- Water service: A line along County Road 32180 starts with confirming the address provider and exposing marked utilities along the route.
- Electric conduit: Before planning a Sunset Drive conduit bore, we confirm the line owner among providers reporting service in Lamar County.
- Fiber drop: A Rose Drive route can place conduit beneath the street so the pavement and driveways stay uncut.
- Drainage crossing: A bore near Toco’s unnamed drainage needs a route and pit plan suited to the channel and local clay.
- Creek crossing: A planned route toward South Branch is checked for federal water jurisdiction during planning.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore on County Road 32180 in Toco?
A map pin on County Road 32180 gives us the exact route to assess, including nearby pavement and marked utilities. Send what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see entry and exit pits, crossings and access before we set the scope.
The 241 road miles from Yukon affect mobilization, while Toco’s heavy Crockett clay can shape fluid use and reaming time. A US 82 crossing brings right of way planning into the work. Price also reflects line size and length, utilities to expose, pavement or concrete, drainage crossings, pits, excavator time, sand backfill and emergency or high profile conditions. The exact route on County Road 32180 helps separate the main drilling work from those added site demands.
Questions people ask about boring in Toco
Does Trinity Boring Solutions take directional boring jobs in Toco, Lamar County?
Yes. We take directional boring work in Toco, Lamar County, and staff it with our own crews or with crews from partner drilling contractors we have vetted. The Yukon office remains the customer contact through the bore log, including for work along County Road 32180.
Can you bore a utility line under South Branch near Toco?
A bore may be planned beneath a creek, but the exact South Branch route must be checked first. South Branch is 0.5 miles from Toco’s limits, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. The channel, entry pits and exit pits shape the bore plan.
Who owns the electric lines in Toco, Lamar County, and who confirms conduit specs?
The county reports Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative and Lamar County Electric Cooperative Association as electric service providers. That does not identify the owner at every Toco address. We confirm the line owner and conduit requirements for the specific route, such as a bore on Sunset Drive.
Does the city or county control Rose Drive in Toco, and must we cut it?
Toco is incorporated, so Rose Drive is a city street. A bore can pass beneath pavement, driveways and sidewalks without cutting them; pits sit in the dirt on each side of the route. The exact Rose Drive alignment and existing utilities determine where those pits can go.
How old are the homes and buried lines on Sunset Drive in Toco?
Reliable housing age data are not published for Toco, so we cannot use a local survey to date homes or buried lines on Sunset Drive. For a replacement bore, we locate and expose marked utilities before drilling near them. For a new service, the route and connection point guide the plan.
Does Crockett soil in Toco corrode steel, and what pipe should a bore use?
The USDA soil survey maps high steel corrosion risk across Toco, including the Crockett soil area. The line owner selects suitable materials or coatings for steel casing and tracer wire; HDPE is not affected by soil corrosion. Confirm the pipe choice for the specific County Road 32180 installation.
How much 811 notice does a Toco bore on County Road 32180 need?
The excavator or project contact requests a Texas811 locate for the County Road 32180 bore at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For a Toco crossing on County Road 32180, if our start slips more than 14 days past the original notice, we make a new request. When marks near South Branch are worn or moved, we refresh them through Texas811 before boring work continues.
How far is Toco from the Yukon office via Paris, and does that affect a bore?
From our Yukon, Oklahoma main office, Toco is 241 road miles away, a 4.6 hour drive that shapes our boring schedule. Paris is 6.0 miles east of Toco. That distance can affect mobilization for a bore on US 82, along with the route length, soil and crossings.
What affects the cost of directional boring in Toco under US 82?
The job details drive the price, including bore length, pipe size, Crockett clay, pavement, marked utilities to expose and drainage crossings. A US 82 right of way route also affects planning, while the 241 road miles from Yukon can affect mobilization. Pits, excavator time and emergency conditions may also change the scope.
Where the Toco facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Toco
- U.S. Census Bureau, TIGER/Line 2024: Toco boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Toco
- U.S. Census Bureau, American Community Survey 2019 to 2023: Toco housing units and year built
- Macrostrat geologic map compilation: map units under Toco
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Lamar County
- U.S. Geological Survey, Elevation Point Query Service: Toco elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Toco
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Toco
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Toco, Texas
Type the address of your job in Toco. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Toco
Same county: Reno · Blossom · Powderly · Deport · Sun Valley. All counties: Texas county list.
