trinityboringsolutions.com

Powderly Texas Directional Boring: Freestone Soil, US 271, Kiamichi Railroad

Quick Answer: At the top five feet, the USDA soil survey maps Freestone soil and heavy clay; the geologic map shows the Eagle Ford Formation below, and US 271 is a route a bore may cross. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for work along US 271 in Powderly, Texas. Powderly is 227 road miles from our Yukon, Oklahoma main office, with the Kiamichi Railroad also crossing the mapped community. At about 40 inches, clay loam and clay dominate the mapped ground, so sticky cuttings and pressure need attention during a bore.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Powderly bores at a glance

  • Unincorporated community in Lamar County, Texas. Population 1,261 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 227 miles, about 4.3 hours of driving.
  • Ground: Freestone soil is mapped on 56 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 271, Texas State Highway 217, FM 3298 and FM 2648. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: Kiamichi Railroad, with 4 mapped street and rail crossings.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring on Northwoods Road in Powderly?

At the top five feet, the USDA soil survey maps Freestone soil and heavy clay, with the Eagle Ford Formation shown on the geologic map below. Powderly is an unincorporated community in Lamar County, and the Census Bureau counted 1,261 residents in the 2020 Census. Water, sewer, gas, electric conduit and fiber lines could follow Northwoods Road or connect properties to nearby routes, depending on the project.

Our main office is in Yukon, Oklahoma, and Powderly work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982; that experience informs Powderly planning. We have had no utility strike in over 25 years, a record that matters when planning around reported Lamar County electric providers and buried lines near Northwoods Road.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does Freestone soil mean for boring in Powderly?

The USDA soil survey maps Freestone soil across 56 percent of Powderly. The main mapped unit is Freestone Hicota complex, with 0 to 3 percent slopes. Surface soils are mostly fine sandy loam, but the profile changes with depth: at about 40 inches, 65 percent of the mapped area is clay loam and 29 percent is clay. The survey reports an average clay content of 41 percent at that depth, and heavy clay conditions are mapped across 92 percent of the area. These are mapped soil patterns, not test borings, so a site check still matters.

USDA soil survey, inside the Powderly mapped community boundaryWhat is mapped
Soil series mappedFreestone 56 percent, Annona 21 percent, Derly 8 percent, Woodtell 7 percent and Guyton 5 percent
Texture at the surfacefine sandy loam 58 percent, loam 28 percent and silt loam 12 percent
Texture about 40 inches downclay loam 65 percent, clay 29 percent and silty clay loam 5 percent
Engineering class about 40 inches downfat clay (CH) 85 percent and lean clay (CL) 14 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches69 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel97 percent of the area

We account for Powderly’s mapped limits: bedrock is not mapped in the top five feet, but deeper rock remains possible. The geologic map identifies the Eagle Ford Formation, of Turonian age, which includes shale, siltstone and limestone. A seasonal water table is mapped within 60 inches across 69 percent of the area, so bore pits may need pumping or smaller dimensions. Flood prone soils cover 5 percent. High steel corrosion risk is mapped across 97 percent, so the line owner should consider casing and tracer wire materials; HDPE avoids that steel concern.

How do crews bore Powderly clay loam?

At about 40 inches, clay loam and clay are common in the Powderly soil survey. We plan the fluid, reaming and pit work around that sticky ground and the water table mapped near the surface.

  1. Clay control: Powderly has clay loam and clay mapped at about 40 inches, so we use thinner fluid, ream in stages and pull pipe soon after opening the hole.
  2. Fluid pressure: Heavy clay is mapped across 92 percent of Powderly, so we watch returns closely to limit pressure that could lift pavement near US 271.
  3. Wet pits: A seasonal water table is mapped within 60 inches across 69 percent of Powderly, so small pits and pumping may be needed near Hidden Lake.
  4. Utility exposure: Before drilling near a marked line on Northwoods Road, we hydrovac pothole it because surface marks show position but not depth.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Which roads and tracks can a Powderly bore cross near US 271?

US 271 runs through the mapped Powderly community, along with Texas State Highway 217, FM 3298 and FM 2648. Northwoods Road is the longest named street at 2.34 miles inside the community. Deepwoods East Road and Hidden Lake Drive are also named routes, at 1.0 mile and 0.79 miles. A bore beneath pavement can leave the surface intact, but the route and bore profile still need to account for the road, its right of way and nearby buried lines.

CrossingTypeMapped extentWho has a say
US 271US highway6.8 roadway miles insideState highway office
Texas State Highway 217State highway0.3 roadway miles insideState highway office
FM 3298State highway3.5 roadway miles insideState highway office
FM 2648State highway2.3 roadway miles insideState highway office
Kiamichi RailroadRailroad1.55 track miles insideThe railroad
Pat Mayse LakeLake or pond5,815 acres, nearbyChecked for Corps of Engineers jurisdiction
Lamar LakeLake or pond39 acres, nearbyChecked for Corps of Engineers jurisdiction
Hidden LakeLake or pond32 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Kiamichi Railroad has 1.55 track miles inside Powderly, and 4 mapped street and rail crossings are recorded in the community. A crossing beneath its track needs an agreement from Kiamichi Railroad before the route is set. No named streams are mapped inside the community, though 13.9 miles of unnamed drainage are recorded. Hidden Lake is inside the boundary, while Pat Mayse Lake and Lamar Lake are within one mile outside it; a lake crossing would be checked for federal jurisdiction during planning.

Who approves a Powderly bore in Lamar County?

Powderly has no city government, so approvals for local streets fall to Lamar County or the state, depending on the route. For work in the right of way of US 271, Texas State Highway 217, FM 3298 or FM 2648, the line owner files the utility permit in TxDOT’s RULIS system. The TxDOT Paris District reviews it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. TxDOT cover requirements depend on the line: electric and communication lines need 60 inches at a highway crossing and 48 inches along the right of way; water needs 60 inches at crossings and 36 inches along it; pressurized sewer needs 60 inches at crossings. Kiamichi Railroad sets terms for a track crossing through its agreement.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities may have lines in Powderly and Lamar County?

The water provider for a specific Northwoods Road address has to be confirmed with Lamar County or the local water district before a bore is planned. EPA drinking water records do not match a system to Powderly, so the provider needs to be checked for the exact location. Utilities reporting electric service in Lamar County include Oncor Electric Delivery Company, Texas New Mexico Power, Fannin County Electric Cooperative and Lamar County Electric Cooperative Association. We confirm the line owner for the address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative and Lamar County Electric Cooperative AssociationElectric utilities reporting service in Lamar CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Powderly’s median housing year was 1997 in the American Community Survey 2019 to 2023 five year estimates; we assess underground conditions separately. The survey estimates 7 percent of housing was built before 1960, 47 percent from 1960 to 1999 and 46 percent in 2000 or later. That mix can mean replacement work as well as new service runs. For a proposed line under Northwoods Road, we hydrovac pothole marked utilities on the bore path before drilling near them; locate marks show position, not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Where is Powderly in relation to Paris and Yukon?

Powderly is an unincorporated community in Lamar County, about 10.1 miles north of Paris, the county seat and nearest larger city. The mapped community covers 7.28 square miles, sits at 512 feet in elevation and uses ZIP code 75473. Reno is 9.9 miles south, Sun Valley is 10.4 miles southeast, Blossom is 12.1 miles southeast and Toco is 13.8 miles southwest. From our Yukon, Oklahoma yard, the drive to Powderly is 227 road miles and 4.3 hours, which affects crew mobilization for a job near US 271.

Places near Powderly

What boring work comes up near Northwoods Road in Powderly?

  • Highway crossing: A bore beneath US 271 can carry water or conduit without cutting the pavement, subject to the TxDOT permit and approved profile.
  • Street service: A service along Northwoods Road needs a route plan that accounts for marked utilities and the clay loam mapped below the surface.
  • Rail crossing: A bore beneath the Kiamichi Railroad track needs the railroad’s crossing agreement before casing, depth and flagging details are set.
  • Drainage route: Unnamed drainage mapped in Powderly can affect pit placement and bore depth, even though no named streams are recorded inside the community.
  • Fiber conduit: A fiber route near FM 3298 can be bored beneath the road surface, with the line owner and right of way considered in planning.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Powderly bore near Kiamichi Railroad?

For a Powderly quote, send the address or map pin first, such as a location along Northwoods Road. Tell us what goes in the ground, such as water line or fiber conduit, then the pipe or conduit size and footage. A sketch or plans help show whether the route approaches US 271, Kiamichi Railroad or a drainage area.

The main price driver in Powderly is the ground: clay loam and heavy clay can call for staged reaming and careful fluid control. The number of marked utilities to expose, crossings of US 271 or Kiamichi Railroad, pavement, pits and excavator time also shape the scope. A drainage or lake crossing can add planning. Mobilization matters too, since the jobsite is 227 road miles from our Yukon yard. Pipe size, footage and emergency or high profile work also affect the plan.

Questions people ask about boring in Powderly

Does Trinity take directional boring jobs in Powderly and Lamar County, and who staffs them?

Yes. We take directional boring work in Powderly, Lamar County, using our own crews and partner drilling contractors from satellite yards we have vetted. You work with Trinity from the first call through the bore log, even if a partner crew is on site near Northwoods Road.

Can groundwater or flood prone ground affect Powderly Freestone soil bore pits?

It can. The USDA soil survey maps a seasonal water table within 60 inches across 69 percent of Powderly, so pits may need pumping or a smaller footprint. Flood prone soils cover 5 percent of the mapped area, so a route near local drainage needs careful planning.

Does Powderly Freestone soil corrode steel, and what pipe should I use?

The soil survey maps high steel corrosion risk across 97 percent of Powderly. The line owner should consider casing and tracer wire materials for a bore near Northwoods Road. HDPE is not subject to the mapped soil corrosion concern; the line owner selects the material and any steel coating.

What ground will a bore pass through in Powderly Freestone soil?

Freestone soil is mapped across 56 percent of Powderly. At about 40 inches, the USDA soil survey maps clay loam across 65 percent of the area and clay across 29 percent. Those are survey patterns, not test borings, so the ground at a specific Northwoods Road address may need field checking.

Will a bore in Powderly hit rock below Northwoods Road?

Bedrock is not mapped in the top five feet of Powderly, but deeper rock is still possible. The geologic map shows the Eagle Ford Formation, of Turonian age, with shale, siltstone and limestone. A site specific bore plan near Northwoods Road should account for what the drill encounters.

Who approves a bore under US 271 in Powderly, and which TxDOT office reviews it?

The line owner applies for a permit for work in the US 271 right of way, and the TxDOT Paris District reviews it. We provide the bore plan and profile for the owner’s filing and work under the permit issued to the owner. The approved plan sets the required cover for the line.

How far is Powderly from the Yukon office, and does Paris affect mobilization?

Powderly is 227 road miles and a 4.3 hour drive from our Yukon, Oklahoma yard. Paris is about 10.1 miles south and is the county seat, but the job’s distance from Yukon still affects mobilization for work near US 271.

How early should I call Texas811 for a Powderly bore along Northwoods Road, and what if marks move?

The person arranging a locate for a Northwoods Road bore should describe the planned route and request marks at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days, make a new request. For work planned in Powderly, we have worn or moved marks refreshed through Texas811 before continuing.

What crossing conditions should we consider when pricing a directional bore under US 271 in Powderly?

The scope and ground set the price. Clay loam and heavy clay can affect reaming and fluid work; the US 271 crossing, utility exposures, pavement, pit work and pipe size also matter. Footage, drainage conditions and mobilization from the Yukon yard are other factors. We need the route and installation details to assess the job.

Where the Powderly facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Powderly

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Powderly, Texas

Type the address of your job in Powderly. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Powderly

Same county: Reno · Roxton · Deport · Brookston · Petty. All counties: Texas county list.