trinityboringsolutions.com

Burke Texas Directional Boring: Fuller Soil, White Oak Creek and US 59

Quick Answer: Burke is a small incorporated city, so Conner Road is a city street. We take directional boring, also called horizontal directional drilling (HDD), work in Texas, including bores under White Oak Creek. Our Yukon, Oklahoma main office is 394 road miles from Burke, where US 59 crossings can shape access and permit planning. The USDA soil survey maps Fuller on 87 percent of the city and silty clay loam at about 40 inches; sticky clay calls for staged reaming and a prompt pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Burke bores at a glance

  • Incorporated city in Angelina County, Texas. Population 704 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 394 miles, about 8 hours of driving.
  • Ground: Fuller soil is mapped on 87 percent of the area, with silty clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 93 percent of the area.
  • Highways inside the boundary: US 59 and FM 2108. State permit office: TxDOT Lufkin District.
  • Railroad track inside the boundary: Union Pacific, with 4 mapped street and rail crossings.
  • Named streams inside the boundary: White Oak Creek and Bradley Branch.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring on Felix Weeks Road in Burke?

Burke is a small incorporated city, so streets such as Felix Weeks Road belong to the city. The Census Bureau Vintage 2024 estimate puts this Angelina County city at 704 residents. We install water, sewer, gas, electric conduit and fiber for routes that may follow Felix Weeks Road or cross US 59; the alignment determines how the line is placed.

Our main office is in Yukon, Oklahoma, and Burke work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. More than 25 years without a utility strike matters where new work meets lines from Oncor Electric Delivery Company or other utilities reporting service in Angelina County. Our family business began in 1965 and has drilled directionally since 1982.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Burke’s Fuller soil map show?

The USDA soil survey maps Fuller fine sandy loam on 87 percent of Burke. Fine sandy loam is the surface texture across 90 percent of the mapped area. At about 40 inches, silty clay loam is mapped under 87 percent, with an average clay content of 27 percent at that depth. Sandy ground accounts for 2 percent there. These are mapped soil patterns, not test borings, so a site check still matters. Clay can hold a bore open, but it can also stick to the reamer and grip the pipe.

USDA soil survey, inside the Burke city limitsWhat is mapped
Soil series mappedFuller 87 percent, Koury 4 percent, Herty 3 percent and Alazan 3 percent
Texture at the surfacefine sandy loam 90 percent, very fine sandy loam 5 percent and loam 4 percent
Texture about 40 inches downsilty clay loam 87 percent, clay 4 percent and silt loam 4 percent
Engineering class about 40 inches downlean clay (CL) 88 percent, silty clay (CL ML) 4 percent and fat clay (CH) 3 percent
Average clay content about 40 inches down27 percent
Bedrock mapped within 60 inches93 percent of the area (0 percent hard rock, 93 percent weathered rock)
Seasonal water table within 60 inches92 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel93 percent of the area

Weathered bedrock is mapped within 60 inches across 93 percent of Burke, with a typical depth of 57 inches; hard bedrock is not mapped within that depth. The seasonal water table is mapped within 40 inches across 92 percent, so pits may need pumping. Flood prone soils cover 4 percent, including areas to consider near White Oak Creek. High steel corrosion risk is mapped across 93 percent. The Yegua Formation, of Bartonian age, includes claystone and sandstone; weathered rock may slow a bore, while the line owner selects steel protection.

What does it take to bore Burke’s silty clay loam?

Burke’s Fuller soil map points to silty clay loam below the surface, where sticky cuttings can build on the reamer. We adjust the fluid and reaming sequence to keep the hole stable without forcing the pull.

  1. Fuller soil is mapped as silty clay loam at about 40 inches, so we use a thinner fluid mix and staged reaming to limit sticky cuttings around the reamer.
  2. With seasonal water mapped within 40 inches across 92 percent of Burke, we keep pits compact and plan pumping where a Felix Weeks Road bore needs dry working space.
  3. Every marked utility on a planned Tidwell Road bore is exposed with hydrovac before the drill approaches; paint gives its position, not its depth.
  4. Near White Oak Creek, we plan the bore beneath the channel and track the drill head from the surface, logging depth and pitch as the route advances.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

Where does a line have to go under White Oak Creek in Burke?

US 59 has 4.6 mapped roadway miles inside Burke, and FM 2108 has 2.0. A bore in either right of way needs room for pits and a profile that fits the highway crossing. Felix Weeks Road is the longest named street in the city at 0.99 miles, followed by Tidwell Road at 0.91 and Conner Road at 0.77. Stringer Road adds another local route. Boring can keep pavement and driveways uncut, with entry and exit pits placed off the traveled surface where access allows.

CrossingTypeMapped extentWho has a say
US 59US highway4.6 roadway miles insideState highway office
FM 2108State highway2 roadway miles insideState highway office
Union PacificRailroad1.79 track miles insideThe railroad
White Oak CreekStream1.13 channel miles insideChecked for Corps of Engineers jurisdiction
Bradley BranchStream0.03 channel miles insideChecked for Corps of Engineers jurisdiction
Walkabout CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Stovall CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Bear CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Moccasin CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.79 track miles inside Burke on its Lufkin Subdivision, and the mapped street and rail crossings total 4. A railroad crossing needs the track owner’s agreement, which sets its crossing conditions. White Oak Creek runs 1.13 channel miles in the city; Bradley Branch adds 0.03. The map records 4 street crossings of named streams. Creek work needs a jurisdiction check during planning, and the banks and channel affect bore depth and pit placement.

Who approves a bore under US 59 in Burke?

For electric and communication lines crossing US 59, the cover target is at least 60 inches below the lowest point of the crossed grade; water crossings also call for 60 inches, and pressurized sewer crossings call for 60 inches. The TxDOT Lufkin District reviews a utility permit for work in the state highway right of way. The utility owner files through TxDOT’s RULIS system, while we provide the bore plan and profile. Burke’s city streets, including Felix Weeks Road, belong to the city. A crossing of Union Pacific track needs an agreement from the railroad, and White Oak Creek is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are relevant to a bore in Angelina County near Burke?

The water provider for a specific Burke address must be confirmed with the city, Angelina County or the local water district before a bore is planned; available records do not identify a system for the place. Utilities reporting electric service in the county include Oncor Electric Delivery Company, Houston County Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative. We confirm the line owner before planning an electric conduit bore near US 59, rather than assuming one provider serves every address.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Houston County Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric CooperativeElectric utilities reporting service in Angelina CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Burke’s median housing year at 1991. It estimates that 13 percent of homes were built before 1960, 55 percent from 1960 to 1999 and 32 percent in 2000 or later. A replacement bore near Tidwell Road may need to connect older lines, while newer construction can call for service extensions. Before drilling near a marked line, we expose it with hydrovac potholing because surface marks show position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Do you cover Burke and nearby Diboll?

Burke is in Angelina County, 275 feet above sea level, and covers 2.82 square miles in ZIP code 75941. Diboll is 3.4 miles south and is the nearest larger city; Hudson is 5.9 miles north, while Lufkin, the county seat, is 6.4 miles north. Huntington is 11.5 miles east. From our Yukon, Oklahoma main office, Burke is 394 road miles away and about an 8.0 hour drive. That distance is part of planning mobilization for work near Felix Weeks Road or White Oak Creek.

Places near Burke

What kinds of bores come up on Felix Weeks Road in Burke?

  • Highway crossing: A bore beneath US 59 needs a route and pits that fit the highway right of way and the utility permit.
  • Water service: A service near Conner Road can be installed by bore to avoid opening a trench across a driveway or paved approach.
  • Fiber conduit: A conduit run along Felix Weeks Road can pass below the surface with marked lines exposed before drilling.
  • Creek crossing: A proposed line under White Oak Creek needs a channel depth plan and a jurisdiction check during planning.
  • Rail crossing: A proposed route across Union Pacific track needs the railroad owner’s agreement and its crossing conditions.
  • Utility potholing: On a proposed water service crossing under Tidwell Road, hydrovac potholing exposes marked lines before the drill gets near them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Burke bore near Union Pacific?

A map pin matters near Union Pacific track or White Oak Creek because the exact crossing point changes access, the bore path and the required review. Send the address or pin, what is going underground, the pipe or conduit size and the footage. A sketch or plans help us assess a proposed route under US 59 or near the railroad.

The scope sets the price. A straightforward route through Fuller fine sandy loam with clear access can be simpler to plan than one with silty clay loam, a creek crossing or several marked utilities. Bore length, pipe size, pavement, pits, excavator time and sand backfill also matter. A US 59 permit or Union Pacific agreement can shape the plan, while mobilization reflects Burke’s 394 road miles from Yukon. Emergency or high profile work can change the requirements.

Questions people ask about boring in Burke

Does Trinity take directional boring jobs in Burke and Angelina County?

Yes. Trinity Boring Solutions takes directional boring work across Texas, including projects in Burke and Angelina County. The work is handled by our crews or by partner drilling contractors whose work Trinity has vetted. You deal with Trinity from the first call through the bore log, including when the work is near White Oak Creek.

Who controls Conner Road in Burke, and does a bore require cutting it?

Conner Road is a city street because Burke is incorporated. A directional bore can pass beneath pavement without opening a trench across the road, with pits placed on either side where access allows. The route and any required city coordination depend on the specific Conner Road location.

How does Burke housing near Tidwell Road affect replacement bores?

Burke’s median housing year is 1991, according to the American Community Survey 2019 to 2023 five year estimates. With 13 percent of housing built before 1960, replacement work near Tidwell Road may connect to older buried lines. We expose marked utilities before drilling so the bore can be planned around their actual position and depth.

Can groundwater or flood prone soil affect bore pits near White Oak Creek in Burke?

It can. The USDA soil survey maps a seasonal water table within 40 inches across 92 percent of Burke, so pits near White Oak Creek may need pumping. Flood prone soils cover 4 percent of the mapped area. We account for the channel and wet ground when setting the crossing depth and pit locations.

Does Fuller soil in Burke corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 93 percent of Burke, including areas mapped as Fuller soil. HDPE is not affected by that soil corrosion concern. For steel casing or tracer wire, the line owner chooses any coating needed for the project; the right material depends on the line design.

What ground does a bore pass through in Burke’s Fuller soil?

The USDA soil survey maps Fuller fine sandy loam across 87 percent of Burke. At about 40 inches, silty clay loam is mapped under 87 percent, and the average clay content there is 27 percent. That sticky material can collect on a reamer and grip pipe, so we may use staged reaming and a prompt pipe pull.

What bore sizes and lengths can Trinity handle for a job near Stringer Road in Burke?

Trinity handles lines from 3/4 inch service sizes up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A proposed route near Stringer Road still needs a site specific plan: soil, utilities, access and the line’s size all affect the equipment and sequence.

How much notice does Texas811 need for a bore on Felix Weeks Road in Burke?

Texas811 needs a locate request at least two working days before excavation begins, excluding Saturdays, Sundays and legal holidays. For a planned Felix Weeks Road bore, the notice cannot be made more than 14 days before the start. If the start slips more than 14 days past the original notice, submit a new request; worn or moved marks must be refreshed before work continues.

What affects the cost of directional boring under US 59 in Burke?

The job scope sets the price, including length, pipe size, soil, utilities to expose, pavement, pits and creek crossings. A US 59 route can add highway permit planning, while Fuller soil and White Oak Creek may affect the bore method. Mobilization also matters because Burke is 394 road miles from the Yukon yard.

Where the Burke facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Burke

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Burke, Texas

Type the address of your job in Burke. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Burke

Same county: Zavalla. All counties: Texas county list.