Lufkin Texas Directional Boring: Fuller Soil, Cedar Creek and US 59
Quick Answer: Lufkin is 388 road miles from our Yukon yard; our own crews and vetted partner contractor satellite yards staff work near Cedar Creek. We take directional boring, also called horizontal directional drilling (HDD), for utility routes crossing US 59 without cutting the paved roadway. Fuller soils cover 30 percent of the mapped area, and the silty clay loam mapped at 40 inches can grip pipe, so reaming and fluid need care. Send the location near Medford Drive, line type, size and footage so we can scope the route.
Lufkin bores at a glance
- County seat of Angelina County, Texas. Population 34,399 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 388 miles, about 7.9 hours of driving.
- Ground: Fuller soil is mapped on 30 percent of the area, with silty clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 65 percent of the area.
- Highways inside the boundary: US 59, US 69, US 69 Business, US 59 Business and Loop 287. State permit office: TxDOT Lufkin District.
- Railroad track inside the boundary: Angelina and Neches River Railroad and Union Pacific, with 58 mapped street and rail crossings.
- Named streams inside the boundary: Cedar Creek, Hurricane Creek, Moccasin Creek and Walkabout Creek.
- Public water: City of Lufkin, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Lufkin near Cedar Creek?
At 388 road miles from our Yukon yard, Lufkin work is handled by our crews and vetted partner contractor crews. The Census Bureau Vintage 2024 estimate puts the city population at 34,399 in Angelina County. We install water, sewer, gas, electric conduit and fiber lines, including routes beneath 1st Street or connecting properties along Medford Drive.
Our main office is in Yukon, Oklahoma, and Lufkin work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965 and began directional boring in 1982. That experience fits the range of utility routes beneath Lufkin streets such as Timberland Drive, from small service lines to larger casing.

What ground should we expect for boring in Lufkin on Fuller soils?
The USDA soil survey maps Fuller as the leading soil series, covering 30 percent of Lufkin. Fuller fine sandy loam, with 1 to 4 percent slopes, is mapped across 9 percent of the area. At about 40 inches below the surface, silty clay loam is mapped under 33 percent, while fine sandy loam is mapped under 15 percent. The mapped average clay content at that depth is 28 percent. Around Lufkin, we treat soil survey patterns as planning context, not as substitutes for test borings along a proposed crossing. Silty clay loam can stay open but may stick to the reamer and grip the pipe, so the bore plan needs to account for it.
| USDA soil survey, inside the Lufkin city limits | What is mapped |
|---|---|
| Soil series mapped | Fuller 30 percent, Alazan 18 percent, Keltys 14 percent, Kurth 12 percent and Koury 5 percent |
| Texture at the surface | fine sandy loam 62 percent, very fine sandy loam 21 percent and loam 10 percent |
| Texture about 40 inches down | silty clay loam 33 percent, fine sandy loam 15 percent and loam 13 percent |
| Engineering class about 40 inches down | lean clay (CL) 60 percent, silty clayey sand (SC SM) 15 percent and fat clay (CH) 10 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | 65 percent of the area (0 percent hard rock, 65 percent weathered rock) |
| Seasonal water table within 60 inches | 62 percent of the area |
| Flood prone soils | 10 percent of the area |
| High corrosion risk for uncoated steel | 70 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches across 65 percent of Lufkin, with typical bedrock depth at 47 inches; hard bedrock is not mapped within that depth. The Yegua Formation, of Bartonian age, includes claystone and sandstone, so actual ground can change along a route. A seasonal water table is mapped within 60 inches across 62 percent of the area, which can send water into pits. Flood prone soils cover 10 percent, including areas where Cedar Creek crossings need depth planning. High steel corrosion risk is mapped under 70 percent, so the line owner should consider casing and tracer wire materials; HDPE is not affected by soil corrosion.
How is a bore planned for Lufkin silty clay loam?
Fuller soils and the silty clay loam mapped under Lufkin call for a controlled ream and careful fluid use. We track the drill head from the surface and record depth and pitch as it advances.
- With Fuller soils and silty clay loam mapped below Lufkin, we use staged reaming and a fluid mix suited to sticky ground so pipe does not bind.
- Where seasonal water is mapped within 60 inches, pits near Cedar Creek may take on water, so we plan compact pits and pumping.
- For Cedar Creek, flood prone soils mapped in parts of Lufkin call for a route deep enough to pass below the channel; we check Corps jurisdiction during planning.
- Before a bore near US 59 or Medford Drive, we expose each marked utility with hydrovac, then track and log the drill head as it advances.

What crossings shape a directional bore in Lufkin near Angelina and Neches River Railroad?
US 59, US 69 and Loop 287 are among the major routes inside Lufkin, along with State Highway 103 and FM 58. A bore near a state highway needs a route and depth plan that fits its right of way. The city has 466.6 public road centerline miles. 1st Street is the longest named street at 8.64 miles, followed by Medford Drive at 7.79 miles and John Redditt Drive at 6.8 miles. Timberland Drive adds another 5.41 miles of potential utility routing through the city.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 59 | US highway | 20 roadway miles inside | State highway office |
| US 69 | US highway | 15.6 roadway miles inside | State highway office |
| US 69 Business | US highway | 5.6 roadway miles inside | State highway office |
| US 59 Business | US highway | 6.7 roadway miles inside | State highway office |
| Loop 287 | State highway | 30.4 roadway miles inside | State highway office |
| Texas State Highway 103 | State highway | 8.9 roadway miles inside | State highway office |
| FM 324 | State highway | 5.7 roadway miles inside | State highway office |
| FM 58 | State highway | 4.1 roadway miles inside | State highway office |
| Texas State Highway 94 | State highway | 3.5 roadway miles inside | State highway office |
| FM 819 | State highway | 3.4 roadway miles inside | State highway office |
| Spur 339 | State highway | 2.4 roadway miles inside | State highway office |
| FM 325 | State highway | 1.9 roadway miles inside | State highway office |
| FM 3482 | State highway | 1.8 roadway miles inside | State highway office |
| FM 1336 | State highway | 1.8 roadway miles inside | State highway office |
The Angelina and Neches River Railroad has 13.71 track miles inside Lufkin, and Union Pacific has 12.91. Public maps show 58 street and rail crossings in the city, so track ownership needs to be pinned down at the proposed route. Cedar Creek runs 6.81 channel miles here, and the city has 30 mapped street crossings of named streams. Hurricane Creek and Moccasin Creek are other mapped waterways. Lake Myriad, Vfw Lake and Jones Lake are also inside the city limits, so a route near them needs site specific planning.
Which permits apply to a Lufkin bore under US 59?
For a crossing beneath US 59, US 69, Loop 287 or another state highway, cover depth sets how low the bore must run. TxDOT rules call for 60 inches of cover at crossings for electric and communication lines and water lines, and for pressurized sewer lines; electric lines along a right of way need 48 inches and water lines need 36 inches. The utility owner applies through TxDOT’s online RULIS system, with the TxDOT Lufkin District reviewing the request. We prepare the bore plan and profile for the utility owner’s application. A crossing of the Angelina and Neches River Railroad needs an agreement from that railroad. Cedar Creek crossings are checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines may a Lufkin bore meet near City of Lufkin water lines?
The City of Lufkin public water system draws from groundwater wells and reports 28,478 service connections serving 51,236 people. That is a useful starting point when planning a connection near 1st Street, but the actual line route still needs to be located. County electric service is reported by Oncor Electric Delivery Company, Houston County Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative. Before an electric conduit bore near Medford Drive, we confirm which utility owns the line at that location.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Lufkin | Public water system | Groundwater wells | 28,478 connections, 51,236 people served |
| Oncor Electric Delivery Company, Houston County Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative | Electric utilities reporting service in Angelina County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Lufkin’s median housing year at 1980; we use that as context, not subsurface data. The same survey estimates that 19 percent of homes were built before 1960 and 19 percent in 2000 or later. That mix can mean replacement work near older streets as well as new service connections. We hydrovac pothole every marked utility before drilling near it. For example, a proposed line under Timberland Drive needs marked lines exposed before the drill approaches them; surface paint shows position, not depth.

Where does directional boring in Lufkin reach around Redland?
Lufkin is the Angelina County seat, with an elevation of 283 feet and land area of 34.21 square miles. The city’s ZIP codes are 75904 and 75901. Hudson is 3.3 miles west, Redland is 5.8 miles north, Burke is 6.4 miles south, Huntington is 9.5 miles east and Diboll is 9.8 miles south. From our Yukon, Oklahoma yard, the road trip to Lufkin is 388 miles and takes 7.9 hours. That distance is part of planning crew and equipment mobilization for work around US 59 or the city’s local streets.
Places near Lufkin
- Directional boring in Hudson: 3.3 miles west
- Directional boring in Redland: 5.8 miles north
- Directional boring in Burke: 6.4 miles south
- Directional boring in Huntington: 9.5 miles east
- Directional boring in Diboll: 9.8 miles south
Which jobs call for a bore in Lufkin near Medford Drive?
- Highway crossing: A bore beneath US 59 or Loop 287 keeps the paved route intact while the utility passes below the highway right of way.
- Water service: A connection near 1st Street can tie a property route to the City of Lufkin groundwater system without open cutting the street.
- Fiber route: A conduit bore along Medford Drive can carry fiber beneath pavement and avoid surface cuts on the route.
- Creek crossing: A Cedar Creek bore keeps the channel bank and waterway uncut while the line passes beneath the mapped crossing.
- Rail crossing: A route under Angelina and Neches River Railroad track needs the owner’s crossing agreement and a plan for its conditions.
- Service line: A short run near Angelina College can fit a small service line, while longer routes can use larger casing as the job requires.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives a directional boring quote in Lufkin near Timberland Drive?
For a bore along Timberland Drive, send the address or map pin, what is going into the ground, the pipe or conduit size and footage. A sketch or plans help show the route, nearby streets and any crossings. Those details let us review the proposed path and identify what needs to be checked before we price the work.
For directional boring in Lufkin, we set the price from the job scope, including crossing details and requested work. Ground is one factor: Fuller soils and silty clay loam can call for careful reaming. Crossings are another: US 59, railroad tracks and Cedar Creek can affect the bore plan, potholing and access. Logistics matter too, including pavement, pit space, excavator time, backfill and the 388 road miles from Yukon. Pipe size and length, exposed utilities, creek conditions and emergency timing also shape the equipment and crew needed for a Timberland Drive route.
Questions people ask about boring in Lufkin
Does Trinity Boring Solutions take directional boring jobs in Lufkin and Angelina County?
Yes. We take directional boring work in Lufkin and Angelina County, with our own crews and vetted partner contractor crews staffing the job. On Lufkin projects, we coordinate with Trinity from the first call through the bore log, regardless of which crew is on site. We can scope a route near Cedar Creek or a utility run beneath 1st Street.
Is there rock along a Lufkin bore, and how much is mapped within five feet?
Weathered bedrock is mapped within 60 inches across 65 percent of Lufkin, while hard bedrock is not mapped in that depth range. The USDA soil survey gives a typical bedrock depth of 47 inches. Conditions can vary along a route, so a bore near Fuller soils needs planning for changing ground rather than an assumption that the path is uniform.
Who approves a Lufkin bore under US 59, and which state office reviews it?
The utility owner applies for a bore in US 59 right of way through TxDOT’s online RULIS system. The TxDOT Lufkin District reviews the application. For a Lufkin filing, we provide the bore plan and profile to document the proposed underground route. The required cover depends on the line type, and the district can set a different depth in the permit for a crossing near Lufkin.
What does a Lufkin bore under Angelina and Neches River Railroad track need?
A crossing under Angelina and Neches River Railroad track needs an agreement from the railroad that owns it. The agreement sets crossing conditions such as casing, depth and flagging. The railroad has 13.71 track miles inside Lufkin, so the route needs to identify the owner before the crossing plan is prepared.
Can a utility line be bored under Cedar Creek in Lufkin?
A bore under Cedar Creek can be considered, with the route planned to pass below the channel and avoid cutting the creek bank. The USDA soil survey maps flood prone soils under 10 percent of Lufkin, so conditions around the crossing matter. Cedar Creek crossings are also checked for U.S. Army Corps of Engineers jurisdiction during planning.
Who runs the Lufkin public water system, and where does its water come from?
The City of Lufkin owns the public water system, and its source is groundwater wells. Public records list 28,478 service connections and 51,236 people served. For a proposed water line near Medford Drive, we still need the route and line location to plan the bore accurately.
What bore sizes and lengths can Trinity handle for a Lufkin job near Timberland Drive?
We handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. That range can suit a service connection near Timberland Drive or a larger crossing, depending on the route, ground and installation needs. A map or plan helps us review the proposed path.
How much notice does Texas811 need for a Lufkin bore near 1st Street, and what if marks move?
Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. Texas811 describes that as at least two working days. If marks along 1st Street wear off or move, they must be refreshed through Texas811 before work continues. A delay beyond 14 days after the original notice requires a new notice.
What affects the cost of directional boring in Lufkin under US 59?
The route and scope set the cost, not just footage. For a US 59 crossing, the highway permit and required cover affect planning. Pipe size, Fuller soil conditions, nearby utilities, pavement, railroad or creek crossings, pit work and backfill can also change the job. Mobilization from Yukon matters for Lufkin, which is 388 road miles from our yard.
Where the Lufkin facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Lufkin
- U.S. Census Bureau, TIGER/Line 2024: Lufkin boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Lufkin
- U.S. Census Bureau, American Community Survey 2019 to 2023: Lufkin housing units and year built
- Macrostrat geologic map compilation: map units under Lufkin
- U.S. EPA Safe Drinking Water Information System: public water systems serving Lufkin
- U.S. Department of Transportation, North American Rail Network: track owners in Angelina County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Angelina County
- U.S. Geological Survey, Elevation Point Query Service: Lufkin elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Lufkin
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Lufkin
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Lufkin, Texas
Type the address of your job in Lufkin. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Lufkin
Same county: Zavalla. All counties: Texas county list.
