Redland Texas Directional Boring: Kirvin Soil, US 59 And Mill Creek
Quick Answer: Can your line pass under US 59 without an open cut? We take directional boring, also called horizontal directional drilling (HDD), work in Redland, Texas, for routes beneath that highway. The Yukon, Oklahoma main office is 386 road miles away, and the Union Pacific track inside Redland makes route access part of the plan. Kirvin soil is common here, while the USDA soil survey maps clay at 40 inches across 61 percent of the area; sticky cuttings call for staged reaming.
Redland bores at a glance
- Unincorporated community in Angelina County, Texas. Population 1,088 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 386 miles, about 7.9 hours of driving.
- Ground: Kirvin soil is mapped on 27 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 26 percent of the area.
- Highways inside the boundary: US 59, FM 2021 and FM 2251. State permit office: TxDOT Lufkin District.
- Railroad track inside the boundary: Union Pacific.
- Named streams inside the boundary: Mill Creek.
- Public water: Redland Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Union Pacific in Redland?
We take directional boring jobs in Redland, an unincorporated community in Angelina County. The Census Bureau counted 1,088 people in 2020; it does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber, including routes along FM 2021 or Rivercrest Road where a service needs to reach a property without cutting the pavement.
Our main office is in Yukon, Oklahoma, and Redland work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business that started in 1965, with directional boring work dating to 1982. Four decades of boring help us plan for Redland’s sticky clay and the varied ground mapped around Mill Creek.

How does Kirvin soil affect drilling in Redland?
The USDA soil survey maps Kirvin across 27 percent of Redland and Cuthbert across 25 percent; Woodtell accounts for 11 percent. Fine sandy loam covers 64 percent of the mapped surface, but the material changes with depth. At about 40 inches, clay is mapped across 61 percent of the area, with CH clay among the common classifications. These are mapped soil shares, not readings from test holes. In the clay, sticky material can gather on the reamer, so we plan staged reaming and keep the pullback close to the final pass.
| USDA soil survey, inside the Redland mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Kirvin 27 percent, Cuthbert 25 percent, Woodtell 11 percent, Sacul 9 percent and Bernaldo 7 percent |
| Texture at the surface | fine sandy loam 64 percent, very fine sandy loam 12 percent and gravelly fine sandy loam 8 percent |
| Texture about 40 inches down | clay 61 percent, sandy clay loam 14 percent and clay loam 8 percent |
| Engineering class about 40 inches down | fat clay (CH) 39 percent, lean clay (CL) 26 percent and silt (ML) 25 percent |
| Average clay content about 40 inches down | 39 percent |
| Bedrock mapped within 60 inches | 26 percent of the area (0 percent hard rock, 26 percent weathered rock) |
| Seasonal water table within 60 inches | 26 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 82 percent of the area |
The USDA soil survey maps bedrock within 60 inches in 26 percent of Redland, with typical depth at 37 inches. A seasonal water table is mapped within 60 inches in 26 percent, and flood prone soils cover 6 percent, so Mill Creek crossings need careful pit and depth planning. High steel corrosion risk is mapped across 82 percent, which matters for uncoated casing and tracer wire; the line owner selects coatings. The Cook Mountain Formation, of Bartonian age, includes claystone, sandstone and siltstone, so ground conditions can change along a bore.
How is a bore run through Redland clay?
Redland’s clay at about 40 inches can cling to the reamer and grip pipe. Along routes such as Rivercrest Road, we plan the bore in stages and manage the drilling fluid to suit the mapped ground.
- In Redland’s mapped clay, we use a fluid mix suited to sticky cuttings and ream in stages so clay does not build up on the tooling.
- Where Mill Creek or mapped seasonal water could affect entry pits, we keep pits small and pump water as needed.
- Before a bore near Winston 8 Ranch Road reaches a marked line, we hydrovac pothole to expose it and check its actual depth.
- Along a route near US 59, we track the drill head from the surface and log depth and pitch as the bore advances.

Where might a line go under US 59 in Redland?
US 59 runs through Redland, along with FM 2021 and FM 2251. Loop 287 and US 69 sit 0.6 miles outside the mapped community boundary. Rivercrest Road and Winston 8 Ranch Road are the longest named streets inside it, with Redland Theatre Road also among the longer routes. A bore beneath US 59 or one of these streets can leave the paved surface uncut, with entry and exit pits placed off the traveled way where access allows.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 59 | US highway | 4.5 roadway miles inside | State highway office |
| FM 2021 | State highway | 2.5 roadway miles inside | State highway office |
| FM 2251 | State highway | 2.2 roadway miles inside | State highway office |
| Loop 287 | Highway nearby | 0.6 miles outside | State highway office |
| US 69 | Highway nearby | 0.6 miles outside | State highway office |
| US 59 Business | Highway nearby | 0.7 miles outside | State highway office |
| Texas State Highway 103 | Highway nearby | 1.2 miles outside | State highway office |
| US 69 Business | Highway nearby | 1.2 miles outside | State highway office |
| Union Pacific | Railroad | 0.74 track miles inside | The railroad |
| Angelina and Neches River Railroad | Railroad nearby | 0.7 miles outside | The railroad |
| Mill Creek | Stream | 2.37 channel miles inside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 0.74 track miles inside Redland, and its Lufkin Subdivision is named in the records. The Angelina and Neches River Railroad is 0.7 miles outside the boundary. No mapped street and rail crossings are shown inside the community. Mill Creek runs 2.37 channel miles here, with two mapped street crossings of named streams. No lakes or ponds are mapped within one mile. Creek work needs a depth plan and a check for federal waterway jurisdiction.
Who approves a Redland bore in Angelina County?
Redland has no city government, so a street permit is handled by Angelina County or the state, depending on the road. For work in the right of way of US 59, FM 2021 or FM 2251, the line owner, not the driller, submits the utility permit through TxDOT’s RULIS system. We provide the bore plan and profile for the TxDOT Lufkin District review. At highway crossings, required cover depends on the line: electric and communication lines and water lines need 60 inches, while pressurized sewer lines also need 60 inches. A crossing of Union Pacific track requires an agreement with the railroad. Mill Creek work is checked for Army Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried near Redland Water Supply Corporation?
Redland Water Supply Corporation serves 3,354 people through 1,290 service connections, using groundwater wells. Electric utilities reporting service in Angelina County are Oncor Electric Delivery Company, Houston County Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative. Those reports do not establish which company serves each address. Before planning electric conduit near Redland Water Supply Corporation lines, we confirm the owner of the specific electric route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Redland Water Supply Corporation | Public water system | Groundwater wells | 1,290 connections, 3,354 people served |
| Oncor Electric Delivery Company, Houston County Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative | Electric utilities reporting service in Angelina County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put Redland’s median housing year at 1990. The survey shows 8 percent of homes built before 1960 and 37 percent built in 2000 or later. A replacement bore along Winston 8 Ranch Road may pass older buried services, while newer construction can call for a new connection. We hydrovac pothole marked utilities before drilling close to them, since locate marks do not show how deep a line sits.

Where is Redland in relation to Hudson?
Redland is an unincorporated community in Angelina County, 5.8 miles north of the county seat and larger city of Lufkin. Hudson is 7.2 miles southwest, and Huntington is 12.0 miles southeast. The mapped community covers 4.12 square miles at an elevation of 310 feet. ZIP codes are 75901 and 75904. From our Yukon, Oklahoma main office, the road trip is 386 miles and 7.9 hours, so distance is part of planning crew mobilization for a Redland job.
Places near Redland
- Directional boring in Lufkin: 5.8 miles south
- Directional boring in Hudson: 7.2 miles southwest
- Directional boring in Huntington: 12 miles southeast
- Directional boring in Burke: 12.1 miles south
- Directional boring in Nacogdoches: 14.8 miles north
Which jobs call for a bore near Mill Creek in Redland?
- Highway crossing: A route beneath US 59 can keep the roadway intact, with the bore planned around the right of way and required cover.
- Water service: A connection near Redland Water Supply Corporation may need a route that avoids cutting a driveway or street.
- Fiber conduit: A bore along FM 2021 can carry conduit beneath pavement while keeping nearby marked utilities exposed and clear.
- Creek crossing: A Mill Creek bore needs a depth plan that stays below the channel and accounts for wet ground at the pits.
- Rail crossing: A route beneath Union Pacific track needs an agreement with the railroad before the crossing is planned.
- Replacement line: A bore near Winston 8 Ranch Road can replace aging service pipe while avoiding an open cut across the street.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Rivercrest Road in Redland?
For a route near Rivercrest Road, tell us where the work is, what line is going in, its size and the footage. A map pin or address identifies the route; a water service or fiber conduit tells us what is being installed. Plans or a sketch help show crossings such as Mill Creek or US 59.
Ground is a major cost factor in Redland because clay at about 40 inches can stick to tooling and may call for staged reaming. Length and pipe or conduit size shape the equipment and bore plan. Crossings and exposed utilities matter near US 59 and Union Pacific track, as do pavement, pits and creek work at Mill Creek. Mobilization also reflects the 386 road miles from Yukon. High profile or emergency work can add planning needs.
Questions people ask about boring in Redland
Does Trinity Boring Solutions take directional boring jobs in Redland, Angelina County?
Yes. We take directional boring work in Redland, Angelina County, and keep the job with Trinity from the first call through the bore log, regardless of which vetted partner crew is on site. The Yukon main office coordinates with our own crews and partner drilling contractors, so your Redland project has one point of contact.
Who runs Redland’s public water system, and where does its water come from?
Redland Water Supply Corporation is the local public water system, and it draws water from groundwater wells. Public records list 1,290 service connections and 3,354 people served. If your bore near the system’s lines is for a water service or another utility, the route still needs to account for existing buried infrastructure.
Which electric company serves a Redland address in Angelina County, and who confirms conduit specs?
Public records report Oncor Electric Delivery Company and three electric cooperatives serving Angelina County, but they do not identify the provider at every Redland address. We confirm the specific line owner before planning a conduit bore. That owner can verify the conduit requirements for the route near US 59 or another local road.
Who controls Redland Theatre Road, and can a bore avoid cutting it?
Redland is unincorporated, so there is no city government controlling Redland Theatre Road. The county or state handles street permits depending on the road. A directional bore can pass beneath the street without an open cut, with pits placed on either side when access allows and the route is clear.
What does Redland’s housing age along Winston 8 Ranch Road mean for a replacement bore?
The American Community Survey 2019 to 2023 estimates give Redland a median housing year of 1990. Homes from different periods can mean a mix of existing services and newer connections near Winston 8 Ranch Road. We expose marked utilities with hydrovac potholing before drilling near them, rather than relying on locate marks to show depth.
Can groundwater or flood prone soil affect bore pits near Mill Creek in Redland?
It can. The soil survey maps a seasonal water table within 60 inches in 26 percent of Redland and flood prone soils across 6 percent. Near Mill Creek, those patterns call for a careful pit location and water management. The soil map guides planning, but it is not a test of the exact bore route.
How much 811 notice does a bore on Rivercrest Road in Redland need?
For Rivercrest Road, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. The request cannot be made earlier than 14 days before the start. If the start moves more than 14 days past the original notice, submit a new request; worn or moved marks must be refreshed before work continues.
How far is Redland from Lufkin and Trinity’s Yukon main office, and does that affect a job?
Redland is 5.8 miles north of Lufkin, while the Yukon, Oklahoma main office is 386 road miles away with a 7.9 hour drive. That distance can affect mobilization planning and timing for work near US 59. We coordinate the job through Trinity whether our own crews or a vetted partner crew is on site.
What affects the cost of directional boring under US 59 in Redland?
The scope sets the cost, starting with Redland’s clay ground, which can affect reaming and fluid needs. Bore length, line size, exposed utilities, pavement, pits and creek crossings also matter. A US 59 crossing can add highway requirements, while mobilization reflects the 386 road miles from Yukon. The quote depends on the actual route and work conditions.
Where the Redland facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Redland
- U.S. Census Bureau, TIGER/Line 2024: Redland boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Redland population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Redland housing units and year built
- Macrostrat geologic map compilation: map units under Redland
- U.S. EPA Safe Drinking Water Information System: public water systems serving Redland
- U.S. Department of Transportation, North American Rail Network: track owners in Angelina County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Angelina County
- U.S. Geological Survey, Elevation Point Query Service: Redland elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Redland
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Redland
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Redland, Texas
Type the address of your job in Redland. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Redland
Same county: Diboll · Zavalla. All counties: Texas county list.
