trinityboringsolutions.com

Hudson Texas Directional Boring: Fuller Soil, Texas State Highway 94 and Zed Creek

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), for routes beneath Texas State Highway 94 and other Hudson crossings. Hudson is 389 road miles from our Yukon yard, and work is staffed by our own crews or crews at vetted partner contractor yards. Fuller soil is common here, and clay at depth can grip pipe and build up on a reamer. We plan the reaming and pull timing around that ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hudson bores at a glance

  • Incorporated city in Angelina County, Texas. Population 5,288 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 389 miles, about 7.9 hours of driving.
  • Ground: Fuller soil is mapped on 36 percent of the area, with silty clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 61 percent of the area.
  • Highways inside the boundary: Texas State Highway 94, FM 706, FM 1194, FM 1271 and FM 3258. State permit office: TxDOT Lufkin District.
  • Railroad track inside the boundary: Angelina and Neches River Railroad, with 1 mapped street and rail crossings.
  • Named streams inside the boundary: Zed Creek and Spring Branch.
  • Public water: Hudson Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Hudson near the Angelina and Neches River Railroad?

We take directional boring work in Hudson, Angelina County, where the Census Bureau Vintage 2024 estimate puts the population at 5,288. We install water, sewer, gas, electric conduit and fiber lines, including routes along Ted Trout Drive and connections that need to pass beneath local streets or the Angelina and Neches River Railroad. The route and line owner shape the bore plan.

Our main office is in Yukon, Oklahoma, and Hudson work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle bores from 3/4 inch service lines to 48 inch casing, with lengths from 10 feet to 5,000 feet. A short service near Lancewood Circle and a long casing route call for different plans. Our family business started in 1965, and we have done directional boring since 1982.

Ditch Witch JT922 directional drill rig boring beneath an airport taxiway next to a Trinity Boring Solutions truck at Will Rogers World Airport
Our Ditch Witch JT922 boring beneath a taxiway at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Hudson have around Fuller soil?

The USDA soil survey maps Fuller soil across 36% of Hudson, with Fuller fine sandy loam, 1 to 4 percent slopes, mapped across 33%. At about 40 inches below the surface, silty clay loam covers 35% of the mapped area and sandy clay loam covers 29%. Fine sandy loam accounts for 16% at that depth, while the mapped sandy share is also 16%. These are mapped soil patterns, not test borings. Clay can stick to a reamer and grip pipe, while sandy ground can fall in behind the bit.

USDA soil survey, inside the Hudson city limitsWhat is mapped
Soil series mappedFuller 36 percent, Keltys 16 percent, Kurth 15 percent, Alazan 15 percent and Rosenwall 7 percent
Texture at the surfacefine sandy loam 75 percent, very fine sandy loam 17 percent and silt loam 6 percent
Texture about 40 inches downsilty clay loam 35 percent, sandy clay loam 29 percent and fine sandy loam 16 percent
Engineering class about 40 inches downlean clay (CL) 50 percent, clayey sand (SC) 29 percent and silty clayey sand (SC SM) 16 percent
Average clay content about 40 inches down26 percent
Bedrock mapped within 60 inches61 percent of the area (0 percent hard rock, 61 percent weathered rock)
Seasonal water table within 60 inches74 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel82 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 61% of Hudson, but hard bedrock is not mapped within that depth. A seasonal water table is mapped within 60 inches across 74%, so pits may need pumping. Flood prone soils cover 2%, including ground where creek planning matters. High steel corrosion risk is mapped across 82%, a concern for uncoated casing and tracer wire; the line owner selects coatings. The local Yegua formation is Bartonian age and includes clay with minor sandstone beds, so actual conditions can change along a bore.

What does it take to bore Hudson’s silty clay loam?

Hudson’s mapped silty clay loam and Fuller soils call for attention to fluid, reaming and pull timing. We plan from the route and soil survey, then adjust to what the drill shows near Zed Creek or a street crossing.

  1. In Fuller soil, clay at depth can cling to the reamer and pipe, so we use staged reaming and plan to pull the line while the opened hole is ready.
  2. Where Hudson’s mapped sandy ground is encountered, we use drilling fluid to support the hole and have the pipe ready before the final ream.
  3. A seasonal water table is mapped within 60 inches across 74% of Hudson, so we plan compact pits and pumping where Ted Trout Drive access allows.
  4. Before approaching a marked line near Hudson Water Supply Corporation routes, we hydrovac pothole to confirm depth; paint alone does not show how deep a utility lies.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Where might a Hudson line go under Zed Creek?

Texas State Highway 94 runs 4.4 mapped roadway miles within Hudson, while FM 706 has 3.6 miles and FM 1194 has 2.4 miles. Texas State Highway 103 is 0.2 miles outside the limits, and Loop 287 is 0.3 miles away. Among the longer named streets, Ted Trout Drive runs 3.85 miles in the city, Bethlehem Road 2.99 miles and Lancewood Circle 2.06 miles. A bore route under any of these roads needs a plan that fits the crossing and access points.

CrossingTypeMapped extentWho has a say
Texas State Highway 94State highway4.4 roadway miles insideState highway office
FM 706State highway3.6 roadway miles insideState highway office
FM 1194State highway2.4 roadway miles insideState highway office
FM 1271State highway1.4 roadway miles insideState highway office
FM 3258State highway0.2 roadway miles insideState highway office
Texas State Highway 103Highway nearby0.2 miles outsideState highway office
Loop 287Highway nearby0.3 miles outsideState highway office
Spur 72Highway nearby0.4 miles outsideState highway office
Spur 339Highway nearby1.5 miles outsideState highway office
Angelina and Neches River RailroadRailroad0.79 track miles insideThe railroad
Zed CreekStream1.3 channel miles insideChecked for Corps of Engineers jurisdiction
Spring BranchStream0.36 channel miles insideChecked for Corps of Engineers jurisdiction
Jack CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Kurkindoll CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Angelina and Neches River Railroad has 0.79 track miles in Hudson, and public mapping shows one street and rail crossing. A rail bore needs an agreement from the railroad that owns the track, with casing, depth and flagging set through that agreement. Zed Creek runs 1.3 channel miles in the city, and Spring Branch runs 0.36 miles. Mapping shows six street crossings of named streams. No lakes or ponds are mapped within one mile, but creek routes still need crossing review.

Who approves a bore in Hudson and Angelina County?

Texas State Highway 94 and the FM roads are state routes, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Lufkin District. The utility that owns the line submits the application through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the permit issued to that utility. Hudson’s incorporated city streets belong to the city itself. A bore under the Angelina and Neches River Railroad needs an agreement with the railroad owner, and TxDOT asks for a copy when the line also occupies highway right of way. Zed Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground near Hudson Water Supply Corporation?

Hudson Water Supply Corporation uses groundwater wells and reports 4,195 service connections serving 10,907 people. That network matters when a proposed route follows streets such as Ted Trout Drive. Oncor Electric Delivery Company, Houston County Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative report electric service in Angelina County. We confirm the line owner before planning an electric conduit bore, since those county providers do not identify the electric company at every Hudson address.

Line ownerWhat it isSourceSize
Hudson Water Supply CorporationPublic water systemGroundwater wells4,195 connections, 10,907 people served
Oncor Electric Delivery Company, Houston County Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric CooperativeElectric utilities reporting service in Angelina CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates give Hudson a median housing year of 2002: 11% of units were built before 1960, 35% from 1960 to 1999 and 54% in 2000 or later. A route near older homes may involve replacement lines, while newer streets can call for service extensions. Before drilling near a marked water or electric line, we use hydrovac potholing to expose it and verify its position and depth along the planned crossing.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Where is Hudson in relation to Lufkin?

Hudson is in Angelina County, at an elevation of 328 feet, and covers 5.07 square miles. Its ZIP code is 75904. Lufkin, the county seat and nearest larger city, is 3.3 miles east; Burke is 5.9 miles south, Redland is 7.2 miles northeast, Diboll is 9.0 miles south and Huntington is 12.6 miles east. The Yukon yard is 389 road miles away, with a drive of 7.9 hours. That distance is part of mobilization planning for a job on Ted Trout Drive or Texas State Highway 94.

Places near Hudson

Which jobs call for a bore near Lancewood Circle in Hudson?

  • Highway crossing: A bore beneath Texas State Highway 94 keeps the route below the road surface and follows the TxDOT permit plan.
  • Street service: A water or sewer connection along Lancewood Circle can pass under pavement instead of cutting across the street.
  • Creek crossing: A route near Zed Creek needs depth planning under the channel and a check for federal waterway jurisdiction.
  • Rail crossing: The 0.79 miles of Angelina and Neches River Railroad track in Hudson means a rail route needs the owner’s crossing agreement.
  • Electric conduit: A conduit route near Prdr starts with confirming which electric provider owns the line at that Hudson location.
  • Water service: A connection near Ted Trout Drive needs a route checked against Hudson Water Supply Corporation lines before drilling.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Hudson bore near Ted Trout Drive?

For a Hudson quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Ted Trout Drive needs enough detail to show nearby streets, crossings and access for the entry and exit pits. That lets us judge the bore scope before mobilizing from Yukon.

The price follows the ground and route, with Fuller soil and the silty clay loam mapped at depth shaping drilling and reaming. The number of utilities to expose matters, as do crossings of Texas State Highway 94, Zed Creek or the railroad. Pipe size and bore length affect equipment and time. Pavement, pits, excavator time, sand backfill and emergency timing can change the scope. Mobilization also matters because Hudson is 389 road miles from Yukon.

Questions people ask about boring in Hudson

Does Trinity Boring Solutions take directional boring jobs in Hudson, Angelina County?

Yes. We take directional boring work in Hudson, Angelina County, and staff it with our own crews or crews at partner drilling contractor yards we have vetted. You work with Trinity from the first call through the bore log, including when a crew is on site near Texas State Highway 94.

Does Fuller soil in Hudson create a corrosion concern for steel pipe?

Yes. The USDA soil survey maps high steel corrosion risk across 82% of Hudson, including areas with Fuller soils. HDPE is not affected by soil corrosion. If a project uses steel casing or tracer wire near Ted Trout Drive, the line owner selects any coating needed for that material.

What ground might a bore pass through in Hudson’s Fuller soil?

The USDA soil survey maps Fuller soil across 36% of Hudson. At about 40 inches down, silty clay loam is mapped across 35% and sandy clay loam across 29%; fine sandy loam covers 16%. That mix can mean sticky reamer returns in clay or a hole that needs support in sandy ground near a route such as Lancewood Circle.

Is there rock close to the surface in Hudson?

The USDA soil survey maps weathered bedrock within 60 inches across 61% of Hudson, and within 40 inches across 8%. Hard bedrock is not mapped within 60 inches. The Yegua formation includes clay and minor sandstone beds, so a bore near Zed Creek still needs to account for changing ground rather than assume a uniform soil profile.

Who permits a bore under Texas State Highway 94 in Hudson?

TxDOT reviews a utility permit for work in the Texas State Highway 94 right of way through the TxDOT Lufkin District. The line owning utility files in TxDOT’s RULIS system, and we prepare the bore plan and profile for that application. The route and cover are set through the permit review.

What does a Hudson bore under the Angelina and Neches River Railroad require?

The Angelina and Neches River Railroad owns the 0.79 track miles mapped in Hudson. A crossing needs an agreement with that railroad, which sets casing, depth and flagging. If the same line also occupies highway right of way, TxDOT asks for a copy of the railroad agreement.

What bore sizes and lengths can Trinity handle near Prdr in Hudson?

We handle 3/4 inch service lines through 48 inch casing, and bore lengths from 10 feet to 5,000 feet. A small conduit route near Prdr and a longer casing installation need different equipment and planning. The pipe size, footage and crossing details help us define the right scope.

How early should I request a Hudson 811 ticket for work near Ted Trout Drive?

For work near Ted Trout Drive, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If the start slips more than 14 days beyond the original notice, submit a new request. Worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring in Hudson under Texas State Highway 94?

The scope depends on length, pipe size, Fuller soil and other ground conditions, utilities to expose, and the number of crossings. Pavement and a Texas State Highway 94 right of way can add planning needs; Zed Creek or railroad crossings can also affect the work. Pit setup, excavator time and mobilization from Yukon matter too.

Where the Hudson facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hudson

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hudson, Texas

Type the address of your job in Hudson. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hudson

Same county: Zavalla. All counties: Texas county list.