trinityboringsolutions.com

Clifton Texas Directional Boring: Krum Soil, North Bosque River and BNSF Railway

Quick Answer: Clifton is a small incorporated city, so its streets belong to the city; we take directional boring, also called horizontal directional drilling (HDD), for work near Texas State Highway 6. The Yukon main office is 292 road miles away, and BNSF Railway runs through Clifton. Krum soil is common here, and heavy clay can cling to the reamer and grip pipe. We adjust the drilling fluid and ream in stages to manage that ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Clifton bores at a glance

  • Incorporated city in Bosque County, Texas. Population 3,535 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 292 miles, about 6 hours of driving.
  • Ground: Krum soil is mapped on 33 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 12 percent of the area.
  • Highways inside the boundary: Texas State Highway 6 and FM 219. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: BNSF Railway, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: North Bosque River.
  • Public water: City of Clifton, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Texas State Highway 6 in Clifton?

Trinity Boring Solutions takes directional boring work in Clifton, an incorporated small city in Bosque County. The Census Bureau Vintage 2024 estimate puts the population at 3,535. We install water, sewer, gas, electric conduit and fiber, with routes planned beneath city streets such as Avenue G or near Texas State Highway 6 to avoid open cuts where the design allows.

Our main office is in Yukon, Oklahoma, and Clifton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa. That reach is much longer than a typical Clifton service run; our family business began in 1965 and has done directional boring since 1982.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Krum soil mean for a Clifton bore?

The USDA soil survey maps Krum soil across 33 percent of Clifton, with Krum clay, 1 to 3 percent slopes covering 28 percent. Surface textures are clay across 35 percent of the city and clay loam across 28 percent. At about 40 inches below the surface, clay is mapped across 34 percent and the average clay content is 36 percent. These are mapped patterns, not test borings. Sticky clay can gather on a reamer, so the actual route and drilling response matter.

USDA soil survey, inside the Clifton city limitsWhat is mapped
Soil series mappedKrum 33 percent, Sunev 26 percent, Cranfill 16 percent, Frio 9 percent and Brackett 4 percent
Texture at the surfaceclay 35 percent, clay loam 28 percent and gravelly clay loam 24 percent
Texture about 40 inches downclay 34 percent, loam 26 percent and gravelly clay loam 16 percent
Engineering class about 40 inches downfat clay (CH) 43 percent, lean clay (CL) 28 percent and silty gravel (GM) 16 percent
Average clay content about 40 inches down36 percent
Bedrock mapped within 60 inches12 percent of the area (7 percent hard rock, 4 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel46 percent of the area

Bedrock is mapped within 60 inches across 12 percent of Clifton, and typical depth is 16 inches, so a route may meet rock sooner than the soil map suggests. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 9 percent. High steel corrosion risk is mapped across 46 percent. The local geologic unit is Walnut clay, Albian in age, with clay, limestone and shale. A rock contact can steer the head off line, and steel casing needs the line owner’s coating choice.

How do we bore Clifton clay without opening its streets?

Krum soil and the Walnut clay map unit point to clay that can stick to tooling. We choose fluid and reaming steps for the ground along each route, including streets such as Avenue Q.

  1. Krum clay can ball on the reamer, so we use thinner drilling fluid with polymer and open the hole in stages before pulling pipe.
  2. Where the heavy clay mapped in Clifton is present, we watch fluid returns and keep pressure controlled to reduce the chance of lifting pavement.
  3. We pothole every marked utility along an Avenue Q bore before drilling near it; surface marks show position, not burial depth.
  4. At a North Bosque River route, we plan depth beneath the channel and check for Corps jurisdiction; pits stay on the banks rather than cutting them.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What is in the way of a new line near the North Bosque River in Clifton?

Texas State Highway 6 has 2.1 mapped roadway miles inside Clifton, and FM 219 has 1.6. Both can bring a right of way crossing into the bore plan. Avenue G is the longest named street at 1.38 miles, followed by Avenue Q at 1.37 miles and Avenue North at 1.33 miles. A bore beneath these streets can keep pavement intact, but the entry and exit pits still need workable space.

CrossingTypeMapped extentWho has a say
Texas State Highway 6State highway2.1 roadway miles insideState highway office
FM 219State highway1.6 roadway miles insideState highway office
BNSF RailwayRailroad0.82 track miles insideThe railroad
North Bosque RiverStream1.18 channel miles insideChecked for Corps of Engineers jurisdiction
Santa Fe LakeLake or pond3 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 0.82 track miles inside Clifton, on the Fort Worth Subdivision, and public records map 2 street and rail crossings. The North Bosque River runs 1.18 channel miles through the city, with 2 mapped street crossings of named streams. Santa Fe Lake is also inside the limits. These features can shape the bore path, depth and access plan.

Who has to sign off on a bore in Bosque County near Clifton?

Clifton is incorporated, so its city streets belong to the city itself. For work in the right of way of Texas State Highway 6 or FM 219, the line owner files the utility permit in TxDOT’s RULIS system; Trinity supplies the bore plan and profile, and TxDOT’s Waco District reviews it. Highway cover depends on the line: electric and communication lines need 60 inches at crossings and 48 inches along the right of way; water needs 60 inches at crossings and 36 inches along it; pressurized sewer needs 60 inches at crossings. The permit may set another depth. A BNSF crossing needs the railroad’s agreement, and the North Bosque River crossing is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Clifton around the City of Clifton water system?

The City of Clifton public water system uses surface water and reports 1,481 service connections serving 3,442 people. That network is a key reference when planning a new water route under Avenue G or another street. Electric service is reported in Bosque County by Oncor Electric Delivery Company, Texas-New Mexico Power, Heart of Texas Electric Cooperative and United Electric Cooperative Service. We confirm the line owner for the specific address before a conduit bore.

Line ownerWhat it isSourceSize
City of CliftonPublic water systemSurface water1,481 connections, 3,442 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Heart of Texas Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Bosque CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Clifton’s median housing year at 1971; 21 percent of homes were built before 1960, and 9 percent in 2000 or later. The figures describe housing, not the age of a buried line. A replacement route near Avenue Q may need to connect to older infrastructure, while a new service has a different endpoint. We hydrovac pothole every marked utility on the path before drilling near it; for example, a line beneath 3rd Street must be exposed before the drill approaches.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

How far is Clifton from Meridian and Trinity’s Yukon office?

Clifton is in Bosque County, covers 2.05 square miles and sits at an elevation of 684 feet. Its ZIP code is 76634. Mosheim is 10.4 miles south, Meridian is 10.7 miles north, Valley Mills is 10.8 miles southeast, Laguna Park is 13.0 miles northeast and Cranfills Gap is 14.8 miles west. Meridian is the county seat; Gatesville is 25.6 miles south. The Yukon yard is 292 road miles away, about a 6.0 hour drive, which makes mobilization part of the job plan.

Places near Clifton

What boring work comes up near Avenue G in Clifton?

  • Highway crossing: A Texas State Highway 6 bore needs a route and cover plan suited to the highway right of way and line type.
  • Water service: A connection to the City of Clifton system may need a bore beneath Avenue G without cutting the street surface.
  • Fiber route: A conduit bore along Avenue Q can avoid an open cut, with marked utilities exposed before drilling near them.
  • Creek crossing: A North Bosque River bore needs channel depth planning and a check for Corps jurisdiction.
  • Rail crossing: A route under BNSF Railway requires the railroad’s crossing agreement to set casing, depth and flagging.
  • Drainage crossing: Clifton’s mapped drainage areas can affect bore depth, entry pits and the path around local pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Clifton bore near 3rd Street?

For a bore planned beneath Avenue G, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near 3rd Street can also change the scope if pavement, utilities or limited pit locations affect the bore.

The job scope sets the price. Krum clay can affect drilling fluid and reaming; a North Bosque River crossing adds planning and access needs; and BNSF Railway brings a track crossing into the route. Pipe size, bore length, marked utilities to expose, pavement, drainage crossings, pit work and backfill also matter. Clifton is 292 road miles from Yukon, so mobilization is part of the logistics. High profile or emergency work can change the plan.

Questions people ask about boring in Clifton

Does Trinity Boring Solutions take directional boring jobs in Bosque County around Clifton?

Yes. We take directional boring work in Clifton and staff it with our own crews or vetted partner contractor yards, depending on the job. A customer works with Trinity from the first call through the bore log, including work along Texas State Highway 6 or a Clifton street.

Who owns the electric lines in Bosque County near Clifton, and who confirms conduit specs?

Electric providers reporting service in Bosque County include Oncor Electric Delivery Company, Texas-New Mexico Power, Heart of Texas Electric Cooperative and United Electric Cooperative Service. The line owner for a specific Clifton address must be confirmed before planning the conduit bore, and that owner is the one to confirm its conduit requirements.

Are Clifton streets such as Avenue North controlled by the city or county, and must they be cut?

Clifton is incorporated, so its city streets belong to the city, including Avenue North. A directional bore can pass beneath a street without an open cut when the route, pits and utility clearances allow. We expose marked lines on the bore path before drilling near them.

Does Clifton housing age near Avenue Q matter when replacing buried lines?

It can affect what the project connects to, but housing age does not establish the age of a buried line. American Community Survey 2019 to 2023 five year estimates put Clifton’s median housing year at 1971. A replacement bore near Avenue Q needs the existing line and tie in points located.

Does Krum soil in Clifton corrode steel, and what pipe should a bore use?

The USDA soil survey maps high steel corrosion risk across 46 percent of Clifton, including areas with Krum soil. HDPE is not affected by that soil corrosion concern. If a design uses steel casing or tracer wire, the line owner selects the coating and material requirements for the installation.

What ground does a Clifton bore pass through around Krum soil?

The USDA soil survey maps Krum soil across 33 percent of Clifton. At about 40 inches below the surface, clay is mapped across 34 percent of the city, with CH and CL classifications also common. Those are survey patterns, not test borings, so the route may encounter different ground.

How far is Clifton from the Yukon office, and does nearby Gatesville change mobilization?

Clifton is 292 road miles and a 6.0 hour drive from the Yukon yard. Gatesville is 25.6 miles south of Clifton, but the job’s location and access determine mobilization. Distance from Yukon is one logistics factor for work near Texas State Highway 6 or elsewhere in Bosque County.

How much Texas811 notice does a Clifton bore near Avenue G need, and what if marks move?

Request the Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If the start moves more than 14 days beyond the original notice, make a new request. Refresh worn or moved marks through Texas811 before work continues near Avenue G.

What affects the cost of a directional bore in Clifton near Texas State Highway 6?

The scope drives the price: bore length and line size, Krum clay or rock, marked utilities, pavement, pits, backfill and creek crossings all affect the work. A North Bosque River route or BNSF Railway crossing can add planning needs, while the 292 road miles from Yukon affect mobilization.

Where the Clifton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Clifton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Clifton, Texas

Type the address of your job in Clifton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Clifton

Same county: Walnut Springs · Morgan · Iredell · Kopperl. All counties: Texas county list.