Morgan Texas Directional Boring: Krum Clay, BNSF Railway And Steele Creek
Quick Answer: Texas State Highway 174 and the BNSF Railway are the main crossings to plan around when we do directional boring, also called horizontal directional drilling (HDD), in Morgan, Texas. Morgan is 272 road miles from our Yukon, Oklahoma main office, so a bore near Louise Street needs mobilization planned with the job. Krum soil is common here, and the heavy clay can cling to the reamer and grip pipe. We stage the reaming and watch fluid returns near pavement.
Morgan bores at a glance
- Incorporated city in Bosque County, Texas. Population 470 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 272 miles, about 5.5 hours of driving.
- Ground: Krum soil is mapped on 56 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 21 percent of the area.
- Highways inside the boundary: Texas State Highway 174 and FM 927. State permit office: TxDOT Waco District.
- Railroad track inside the boundary: BNSF Railway, with 1 mapped street and rail crossings.
- Public water: City of Morgan, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near BNSF Railway in Morgan?
BNSF Railway and Texas State Highway 174 are features to consider when planning a line through Morgan, Bosque County. We take directional boring work in Texas for water, sewer, gas, electric conduit and fiber, with routes planned to suit local streets such as Charles Street. The Census Bureau Vintage 2024 estimate puts Morgan’s population at 470, a small community where a service route may pass close to existing lines.
Our main office is in Yukon, Oklahoma, and Morgan work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We started directional boring in 1982, and four decades of work help us plan for Morgan’s mapped Krum clay and nearby limestone. We stay involved from the first call to the bore log, whichever crew is on site.

What kind of ground does Morgan’s Krum soil bring?
The USDA soil survey maps Krum soil across 56 percent of Morgan, with Krum clay map units covering 38 percent at 0 to 1 percent slopes and 18 percent at 1 to 3 percent slopes. At about 40 inches below the surface, clay is mapped under 57 percent of the area; the average clay content there is 42 percent. Heavy clay is mapped under 71 percent. Our mapped soil patterns describe Morgan soils, not the conditions from individual test borings. On a route near Sheppard Street, sticky clay can load up a reamer and swell against pipe, so the bore plan needs staged reaming and a same day pull.
| USDA soil survey, inside the Morgan city limits | What is mapped |
|---|---|
| Soil series mapped | Krum 56 percent, Maloterre 16 percent, Cranfill 14 percent, Sunev 9 percent and Purves 3 percent |
| Texture at the surface | clay 57 percent, gravelly clay loam 29 percent and clay loam 9 percent |
| Texture about 40 inches down | clay 57 percent, bedrock 20 percent and gravelly clay loam 14 percent |
| Engineering class about 40 inches down | fat clay (CH) 57 percent, silty gravel (GM) 14 percent and lean clay (CL) 10 percent |
| Average clay content about 40 inches down | 42 percent |
| Bedrock mapped within 60 inches | 21 percent of the area (21 percent hard rock, 0 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 61 percent of the area |
Bedrock is mapped within 60 inches under 21 percent of Morgan, and the typical mapped depth is 9 inches. Hard bedrock is mapped within that depth range under 21 percent; weathered bedrock is not mapped within 60 inches. We do not map Morgan’s seasonal water table or flood prone soils, so confirm conditions before planning work. High steel corrosion risk is mapped under 61 percent of the area, a concern for uncoated casing and tracer wire that the line owner addresses. The geologic map includes Stony Calcareous Clay Solution Residuum of Cenozoic age and Walnut Clay of Albian age, so limestone or shale contacts may slow the bit or affect steering.
How do we bore Morgan’s clay ground?
Krum clay and the limestone fragments mapped around Morgan call for a controlled bore, not a fast pull. We locate the head from the surface, keep returns in view and adjust the plan to the ground along the route.
- On a route through Morgan’s Krum clay, we use thinner drilling fluid with polymer and ream in stages so sticky soil does not ball up on the reamer.
- Because heavy clay is mapped under 71 percent of Morgan, we monitor fluid returns near Texas State Highway 174 to reduce the risk of lifting pavement.
- Before a bore near Charles Street, we hydrovac pothole each marked utility on the path; surface paint does not show how deep a line sits.
- At a route toward the limestone mapped in Morgan, we track the drill head from the surface and log depth and pitch as the ground changes.

Where might a line go under Louise Street in Morgan?
Texas State Highway 174 runs 1.0 mapped roadway mile within Morgan, and FM 927 runs 0.4 mile. There are no other highways mapped within 1.5 miles outside the city limits. For local routes, Louise Street is the longest named street at 0.86 mile; Sheppard Street and Charles Street each run 0.85 mile. A bore under a road or driveway can avoid cutting the surface, but the route and required cover depend on whether the line crosses or follows a state highway.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 174 | State highway | 1 roadway miles inside | State highway office |
| FM 927 | State highway | 0.4 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 0.61 track miles inside | The railroad |
| Steele Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
BNSF Railway owns 0.61 track mile in Morgan on its Fort Worth Subdivision, and Amtrak uses the track. Public records map one street and rail crossing in the city, so a route near the tracks needs to account for railroad review. No named stream crosses the city, though Steele Creek runs along or touches its boundary; 0.48 mile of unnamed drainage is mapped inside Morgan. No street crossing of a named stream or lakes and ponds within one mile are mapped.
Do I need a permit for Morgan work in Bosque County?
Because Morgan is incorporated, we treat its city streets as belonging to the city itself. Texas State Highway 174 and FM 927 are state highways, and work in their right of way needs a TxDOT utility permit. Electric and communication lines crossing the highway need 60 inches of cover below the lowest crossed grade; water needs 60 inches and pressurized sewer needs 60 inches at crossings. The line owner files through TxDOT’s online RULIS system for the Waco District. We prepare the bore plan and profile and work under the owner’s permit. A BNSF Railway crossing also needs an agreement from BNSF. If planning a crossing at Steele Creek, its jurisdiction is checked during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns Morgan water lines and electric service in the City of Morgan?
The City of Morgan public water system draws from groundwater wells, serving 490 people through 192 service connections, helping us plan underground work around its service footprint. That gives a proposed connection near Charles Street a named local system to check against before choosing a route. The county reports electric service from Oncor Electric Delivery Company, Texas-New Mexico Power, Heart of Texas Electric Cooperative and United Electric Cooperative Service. The line owner is confirmed before planning an electric conduit bore, since those providers are not assumed to serve every Morgan address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Morgan | Public water system | Groundwater wells | 192 connections, 490 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Heart of Texas Electric Cooperative and United Electric Cooperative Service | Electric utilities reporting service in Bosque County | EIA Form 861 | Confirm the line owner by address |
Morgan’s 1984 median housing year, in the American Community Survey 2019 to 2023 five year estimates, can guide underground work planning. It estimates that 15 percent of homes were built before 1960, 59 percent from 1960 to 1999 and 26 percent in 2000 or later. A replacement route near Sheppard Street may have to work around older buried lines, while a newer service may need a different connection path. Before drilling near a marked utility in Morgan, we hydrovac pothole it; paint shows position, not depth.

Where is Morgan in relation to Pecan Plantation?
Morgan is an incorporated city in Bosque County, at an elevation of 739 feet and with 0.74 square mile of land. Its ZIP code is 76671. Meridian, the county seat, is 6.7 miles south; Kopperl is 7.3 miles northeast and Walnut Springs is 8.9 miles west. Blum lies 15.0 miles northeast and Iredell 15.7 miles west. Pecan Plantation, the nearest larger city, is 24.2 miles north. From our Yukon yard, Morgan is 272 road miles and 5.5 drive hours away, so distance is part of planning a crew and equipment mobilization.
Places near Morgan
- Directional boring in Meridian: 6.7 miles south
- Directional boring in Kopperl: 7.3 miles northeast
- Directional boring in Walnut Springs: 8.9 miles west
- Directional boring in Blum: 15 miles northeast
- Directional boring in Iredell: 15.7 miles west
- Directional boring in Pecan Plantation: 24.2 miles north
Which jobs call for a bore near Charles Street in Morgan?
- Highway crossing: A water, sewer or conduit bore beneath Texas State Highway 174 follows the cover and permit requirements for that state route.
- Street service: A connection along Louise Street can pass beneath pavement, with marked utilities exposed before the drill approaches them.
- Rail crossing: A planned route beneath BNSF Railway needs the railroad’s agreement and its requirements for casing, depth and flagging.
- Water service: A connection near the City of Morgan system must be planned around its groundwater wells and existing service lines.
- Drainage crossing: A route near Steele Creek or Morgan’s mapped unnamed drainage needs the channel and jurisdiction considered during planning.
- Fiber conduit: A fiber route along Charles Street can use a bore to avoid opening the street surface, subject to the route and existing lines.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Morgan quote near Steele Creek?
For a Morgan quote, send us the address or map pin, what will go in the ground, pipe or conduit size, and footage; a sketch or plans help. If the route approaches Steele Creek or Texas State Highway 174, include that crossing in the sketch so we can consider the alignment, access and permit path.
In Morgan, the Krum clay and mapped limestone matter first because they can change reaming time and how the drill holds its line. Next, the number of utilities to expose and any pavement along Louise Street affect potholing and surface protection. A Texas State Highway 174 crossing adds permit and cover requirements; BNSF Railway adds railroad coordination. Pipe size, footage, pits, excavator time, sand backfill, creek or drainage crossings, emergency scope and the 272 road miles from Yukon also affect the job price.
Questions people ask about boring in Morgan
Does Trinity Boring Solutions take directional boring work in Morgan, Bosque County?
Yes. We take directional boring work in Morgan and staff it with our own crews or partner contractor crews from satellite yards. You work with Trinity through the bore log, even when a partner crew is on site. For a route near BNSF Railway, we plan around the crossing requirements before the drill starts.
Who is responsible for Charles Street in Morgan, and does a bore have to cut it?
Because Morgan is incorporated, we treat its city streets as belonging to the city itself. A bore along Charles Street can pass below the pavement rather than opening a trench through it, subject to the route and utility locations. We expose marked lines along the path before the drill gets near them.
Do older homes near Sheppard Street in Morgan mean buried lines need replacement bores?
They can. The American Community Survey 2019 to 2023 estimates that 15 percent of Morgan homes were built before 1960, with a median year built of 1984. A replacement bore near Sheppard Street needs a route checked against existing utilities, which we expose by hydrovac before drilling near them.
Does Krum soil in Morgan corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk under 61 percent of Morgan, so uncoated steel casing and tracer wire need consideration. The line owner selects any needed coating. For Morgan work, HDPE is not affected by this soil corrosion concern, so this specific concern does not apply to HDPE. Soil mapping does not replace checking the proposed route and material with the line owner.
What ground does a directional bore pass through in Morgan’s Krum soil?
The USDA soil survey maps Krum soil under 56 percent of Morgan. At about 40 inches, clay is mapped under 57 percent of the area, and the average clay content is 42 percent. Sticky clay can cling to the reamer and grip pipe, so staged reaming and a controlled pull matter.
Will a bore in Morgan hit rock, and how much bedrock is mapped nearby?
Rock is mapped close to the surface in parts of Morgan: typical bedrock depth is 9 inches, and bedrock is mapped within 60 inches under 21 percent of the area. The same share has hard bedrock mapped in that depth range. Weathered bedrock is not mapped within 60 inches, but limestone or shale can still affect a route.
Does Morgan’s distance from Pecan Plantation change a directional boring job?
Morgan is 272 road miles and 5.5 drive hours from our Yukon, Oklahoma yard. Pecan Plantation is 24.2 miles north of Morgan. The Yukon distance can affect crew and equipment mobilization, so we consider it alongside the Krum clay, route length and crossings when setting the job scope.
How much Texas811 notice does a Morgan bore near Louise Street need?
For a bore near Louise Street, the person arranging excavation gives Texas811 the planned path and start date at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, a new notice is needed. If marks are worn or moved in Morgan, we refresh them before work continues.
What affects the cost of a bore under Texas State Highway 174 in Morgan?
The job scope sets the price, not one feature alone. For a Texas State Highway 174 crossing, the permit and required cover matter, while Morgan’s Krum clay can affect drilling time. Pipe size, footage, utilities to expose, pavement, pits, creek or drainage crossings, equipment time and mobilization from Yukon also shape the work.
Where the Morgan facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Morgan
- U.S. Census Bureau, TIGER/Line 2024: Morgan boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Morgan
- U.S. Census Bureau, American Community Survey 2019 to 2023: Morgan housing units and year built
- Macrostrat geologic map compilation: map units under Morgan
- U.S. EPA Safe Drinking Water Information System: public water systems serving Morgan
- U.S. Department of Transportation, North American Rail Network: track owners in Bosque County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Bosque County
- U.S. Geological Survey, Elevation Point Query Service: Morgan elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Morgan
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Morgan
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Morgan, Texas
Type the address of your job in Morgan. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Morgan
Same county: Clifton · Laguna Park · Valley Mills · Cranfills Gap · Mosheim. All counties: Texas county list.
