Iredell Texas Directional Boring: Minwells Soil, FM 216 and North Bosque River
Quick Answer: A route near FM 216 or the North Bosque River calls for careful crossing planning; Trinity Boring Solutions provides directional boring, also called horizontal directional drilling (HDD), in Iredell, Texas. Meridian Street is one local route to assess, and our Yukon, Oklahoma main office is 289 road miles away. Minwells soil covers 44% of the city, so changing soil along a bore can affect steering and reaming. At about 40 inches, sandy clay is mapped across 39% of the area, calling for attention to drilling fluid and the hole staying open.
Iredell bores at a glance
- Incorporated city in Bosque County, Texas. Population 319 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 289 miles, about 5.9 hours of driving.
- Ground: Minwells soil is mapped on 44 percent of the area, with sandy clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 4 percent of the area.
- Highways inside the boundary: FM 216, Texas State Highway 6, FM 927 and FM 1238. State permit office: TxDOT Waco District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: North Bosque River.
- Public water: City of Iredell, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Meridian Street in Iredell?
FM 216 and Meridian Street are examples of routes where water, sewer, gas, electric conduit or fiber lines may need to pass underground. Trinity Boring Solutions takes directional boring work in Iredell and across Texas. The Census Bureau Vintage 2024 estimate puts the city population at 319. We size the bore to the line and route, rather than assuming every street has the same buried utilities.
Our main office is in Yukon, Oklahoma, and Iredell work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. A typical Iredell route near FM 216 is a different scale, but still needs a planned path, utility checks and a bore log. Our family business began in 1965, and we have done directional boring since 1982 for crossings along FM 216.

What ground should a bore expect in Iredell’s Minwells soil?
The USDA soil survey maps Minwells soil across 44% of Iredell and Sunev across 24%. Fine sandy loam is the leading surface texture at 51%, but about 40 inches down, sandy clay is mapped under 39% of the area, loam under 30% and clay under 11%. Average clay content at that depth is 35%. We treat mapped Minwells patterns as soil mapping, not test borings for an Iredell site. The mix means a route near FM 216 may encounter material that holds its shape but sticks to tooling.
| USDA soil survey, inside the Iredell city limits | What is mapped |
|---|---|
| Soil series mapped | Minwells 44 percent, Sunev 24 percent, Krum 6 percent, Bosque 6 percent and Cranfill 5 percent |
| Texture at the surface | fine sandy loam 51 percent, clay loam 24 percent and clay 10 percent |
| Texture about 40 inches down | sandy clay 39 percent, loam 30 percent and clay 11 percent |
| Engineering class about 40 inches down | clayey sand (SC) 39 percent, lean clay (CL) 37 percent and fat clay (CH) 11 percent |
| Average clay content about 40 inches down | 35 percent |
| Bedrock mapped within 60 inches | 4 percent of the area (3 percent hard rock, 1 percent weathered rock) |
| Seasonal water table within 60 inches | 5 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 14 percent of the area |
Bedrock is mapped within 60 inches across 4% of Iredell, and the typical mapped depth is 17 inches, so a route can meet rock sooner than the soil pattern alone suggests. Seasonal water is mapped within 60 inches in 5% of the area, while flood prone soils cover 6%, a concern near the North Bosque River. High steel corrosion risk is mapped across 14%, so the line owner should weigh casing and tracer wire materials. The geologic map includes Cenozoic terrace deposits and Early Cretaceous sedimentary rock, which may change drilling conditions along a route.
How is a bore run through Iredell’s sandy clay?
The USDA survey maps sandy clay under 39% of Iredell at about 40 inches. We match the fluid and reaming plan to the ground, then track the drill head along the proposed route near streets such as Kidd Street.
- Minwells and Sunev soils cover much of Iredell; we track the drill head from the surface and log its depth and pitch as it advances.
- With sandy clay mapped at about 40 inches, we use staged reaming and manage fluid returns so pressure does not lift pavement near FM 216.
- Before a route near Meridian Street reaches a marked utility, we hydrovac pothole to check its depth because locate marks show position only.
- Where a route approaches the North Bosque River, we plan for channel depth and check jurisdiction during planning before setting the bore path.

Which roads, tracks or creeks could a bore cross in Iredell near FM 216?
FM 216 has 1.1 mapped roadway miles inside Iredell, Texas State Highway 6 has 0.8, FM 927 has 0.3 and FM 1238 has 0.2. Meridian Street is the longest named street at 0.84 miles, followed by Hamilton Street at 0.74 and Eastland Street at 0.68. These lengths help identify potential routes, but a site plan still has to show the actual crossing points. A bore under state highway pavement is installed by boring or tunneling, not an open trench.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 216 | State highway | 1.1 roadway miles inside | State highway office |
| Texas State Highway 6 | State highway | 0.8 roadway miles inside | State highway office |
| FM 927 | State highway | 0.3 roadway miles inside | State highway office |
| FM 1238 | State highway | 0.2 roadway miles inside | State highway office |
| North Bosque River | Stream | 0.54 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Walker Branch | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Duffau Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Boyd Branch | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
Public records show no railroad inside Iredell or within one mile outside the city, so there is no mapped local track route to plan around. The North Bosque River runs 0.54 channel miles inside the limits, and one street crossing of a named stream is mapped. Walker Branch is 0.2 miles from the city limits, Duffau Creek is 0.6 miles away and Boyd Branch is 0.9 miles away. We map no lakes or ponds within one mile of Iredell, and separately assess any North Bosque River crossing. A river or creek route needs a jurisdiction check during planning.
Whose permission does a bore in Iredell and Bosque County need?
For city streets such as Meridian Street, the City of Iredell has authority over its streets. Work in the right of way of FM 216, Texas State Highway 6, FM 927 or FM 1238 needs a TxDOT utility permit reviewed by the TxDOT Waco District. The line owner, not the drilling contractor, files in TxDOT’s RULIS system; we prepare the bore plan and profile for that filing. At a highway crossing, electric and communication lines need 60 inches of cover, water needs 60 inches and pressurized sewer needs 60 inches. Along the right of way, the specified cover is 48 inches for electric and communication, and 36 inches for water. For Texas State Highway 6 pavement, we follow TxDOT rules to bore or tunnel beneath existing highway pavement. A North Bosque River crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities might a bore meet near the City of Iredell water system?
The City of Iredell public water system uses groundwater wells and reports 160 service connections serving 360 people. For electric conduit work near Meridian Street or FM 216, utilities reporting service in Bosque County include Oncor Electric Delivery Company, Texas-New Mexico Power, Heart of Texas Electric Cooperative and United Electric Cooperative Service. We confirm the line owner for the particular route before planning a conduit bore; the county list does not identify a provider at every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Iredell | Public water system | Groundwater wells | 160 connections, 360 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Heart of Texas Electric Cooperative and United Electric Cooperative Service | Electric utilities reporting service in Bosque County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Iredell’s median housing year at 1962; we verify utilities near Meridian Street before boring. The survey estimates 48% of homes were built before 1960, 46% from 1960 to 1999 and 6% in 2000 or later. That mix can mean either older lines needing replacement or a new service along Kidd Street. Before drilling near a marked utility, we hydrovac pothole to expose it; paint shows position, not depth.

How far is Iredell from Stephenville and our Yukon yard?
Iredell is in Bosque County, covers 0.45 square miles and sits at an elevation of 893 feet. We use ZIP code 76649 for Iredell address checks, including locations on Hamilton Street. Nearby Walnut Springs is 8.6 miles northeast and Hico is 9.2 miles west; Meridian, the county seat, is 13.7 miles east. Stephenville, the nearest larger city listed, is 25.8 miles northwest. Our Yukon yard is 289 road miles away, about a 5.9 hour drive. That distance is part of planning mobilization for a bore near FM 216.
Places near Iredell
- Directional boring in Walnut Springs: 8.6 miles northeast
- Directional boring in Hico: 9.2 miles west
- Directional boring in Meridian: 13.7 miles east
- Directional boring in Cranfills Gap: 14.8 miles south
- Directional boring in Morgan: 15.7 miles east
- Directional boring in Stephenville: 25.8 miles northwest
What could we bore near Hamilton Street in Iredell?
- Highway crossing: A route under FM 216 needs a bore plan that accounts for pavement and the highway right of way.
- Water service: A line near the City of Iredell system may connect to a groundwater supplied network, with the route checked for existing utilities.
- Street utility: A water, sewer or gas line along Hamilton Street can be bored beneath pavement instead of cutting across the roadway.
- Fiber conduit: A conduit route near Eastland Street needs marked utilities exposed before the drill approaches them.
- Creek crossing: A proposed route at the North Bosque River needs channel depth planning and a jurisdiction check during design.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Kidd Street in Iredell?
For a route near Kidd Street, send the address or map pin, what will go underground, the pipe or conduit size and the expected footage. A sketch or plans help us see whether the line is headed under a street, toward the North Bosque River or along a state highway. The route and the material going in the ground give us a starting scope.
We price the actual work, grouped around ground, crossings and logistics. Minwells soil and sandy clay at about 40 inches can affect tooling and reaming; rock or sticky clay can also change the plan. Crossings matter too, including FM 216 pavement, marked utilities that need potholing, concrete and a possible North Bosque River route. Length, line size, pits, excavator time, sand backfill and emergency timing shape the scope. Iredell’s 289 road miles from Yukon also affect mobilization.
Questions people ask about boring in Iredell
Does Trinity Boring Solutions take directional boring work in Bosque County near Iredell?
Yes. We take directional boring work in Iredell and across Texas, with our crews and partner contractor satellite yards supporting the work. From the first call through the bore log, we keep the same point of contact for Eastland Street work, whichever crew is assigned. A route along FM 216 or Meridian Street still gets planned around its own utility marks and ground.
What ground will a bore encounter in Iredell’s Minwells soil?
The USDA soil survey maps Minwells across 44% of Iredell. At about 40 inches, sandy clay is mapped under 39% of the area and average clay content is 35%. Those are mapped patterns, not a site test. Sticky clay can load the reamer, so the drilling fluid and staged reaming plan matter along a route near FM 216.
Will we encounter rock during directional boring in Iredell where Sunev soils are mapped, or should site conditions be checked first?
It may. Bedrock is mapped within 60 inches across 4% of Iredell, with a typical mapped depth of 17 inches. The geologic map also shows Cenozoic terrace deposits and Early Cretaceous sedimentary rock. Those records do not establish the exact conditions under Meridian Street, so the bore plan should allow for changing ground and slower drilling if rock is met.
Who approves a bore under FM 216 in Iredell?
The line owner applies for the TxDOT utility permit through RULIS, and the TxDOT Waco District reviews work on FM 216. We provide the bore plan and profile for the owner’s application and work under the permit issued to that owner. The specified cover at a highway crossing depends on the line type, and TxDOT can set another depth in the permit.
Can a utility line be bored under the North Bosque River in Iredell?
A bore can be planned for a North Bosque River crossing, but the route needs a channel depth plan and a check for U.S. Army Corps of Engineers jurisdiction. The river has 0.54 channel miles within Iredell. Site conditions and the line path determine the drilling design, so a map pin or plan is useful before setting a route.
For our utility planning in Bosque County, who runs Iredell’s public water system, and where does its water come from?
The City of Iredell owns the public water system, which uses groundwater wells. We account for the report’s 160 service connections serving 360 people when planning underground work near Kidd Street. For a bore near that system, the exact line owner and route still need confirmation before conduit or service work is planned around streets such as Kidd Street.
Can I reach Trinity after hours for an urgent bore near Eastland Street in Iredell?
Yes. Trinity answers the phone 24 hours a day at (405) 409-7423 for urgent work near Eastland Street or elsewhere in Iredell. We offer emergency response, and the route, line type and access still determine what work can be scheduled. Share the location and what needs to be installed so we can understand the request.
How early should I call Texas811 before a bore near Meridian Street in Iredell?
For a Meridian Street bore, count back at least 48 hours from the planned excavation start, excluding Saturdays, Sundays and legal holidays; do not request a locate more than 14 days ahead. If the start near FM 927 moves more than 14 days past the original notice, we make a new request. Before work continues on Somervell Street, we have worn or moved marks refreshed through Texas811.
What affects the cost of directional boring under FM 216 in Iredell?
The route and scope drive the price. For FM 216, pavement and right of way requirements matter, along with length, pipe or conduit size and the number of utilities to expose. Iredell’s mapped sandy clay can affect drilling time, while pits, excavator time, backfill and creek crossings add work. We plan mobilization around the 289 road miles from Yukon main office to Iredell.
Where the Iredell facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Iredell
- U.S. Census Bureau, TIGER/Line 2024: Iredell boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Iredell
- U.S. Census Bureau, American Community Survey 2019 to 2023: Iredell housing units and year built
- Macrostrat geologic map compilation: map units under Iredell
- U.S. EPA Safe Drinking Water Information System: public water systems serving Iredell
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Bosque County
- U.S. Geological Survey, Elevation Point Query Service: Iredell elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Iredell
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Iredell
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Iredell, Texas
Type the address of your job in Iredell. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Iredell
Same county: Clifton · Laguna Park · Valley Mills · Kopperl · Mosheim. All counties: Texas county list.
