trinityboringsolutions.com

El Cenizo Texas Directional Boring: Copita Soil, Weathered Bedrock and Hernandez Street

Quick Answer: Along Hernandez Street and Morales Street, Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), to install utility lines with less surface disruption. El Cenizo is 650 road miles from our Yukon, Oklahoma main office, so that distance is part of planning work near Laredo. Copita soil is common here, and mapped bedrock within 40 inches means crews need to plan for changing ground. We check the route and expose marked utilities before drilling near them.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

El Cenizo bores at a glance

  • Incorporated city in Webb County, Texas. Population 2,433 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 650 miles, about 12.6 hours of driving.
  • Ground: Copita soil is mapped on 50 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 60 percent of the area.
  • No state or US highway is mapped inside the boundary or within a mile and a half of it.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Hernandez Street in El Cenizo?

Trinity Boring Solutions takes directional boring work in El Cenizo, Webb County, including routes along Hernandez and Rodriguez streets. The Census Bureau Vintage 2024 estimate puts the city at 2,433 residents, a compact service area where the route and existing lines matter. We install water, sewer, gas, electric conduit and fiber, with the line type and size set for the address and planned path.

Our main office is in Yukon, Oklahoma, and El Cenizo work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A small service line can be 3/4 inch, while a large casing can reach 48 inch; bore lengths range from 10 feet to 5,000 feet. Our family business started in 1965 and has done directional boring since 1982, including work planned for streets such as Hernandez.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Copita soil affect drilling in El Cenizo?

The USDA soil survey maps Copita across 50% of El Cenizo, with Jimenez at 20%, Lagloria at 13% and Verick at 11%. Fine sandy loam covers 60% of the surface, while very gravelly sandy clay loam covers 20% and silt loam 13%. At about 40 inches, the survey maps bedrock under 50% of the area, variable material under 20%, and cemented bedrock under 11%. These are mapped patterns, not test borings, so the exact route still needs field planning.

USDA soil survey, inside the El Cenizo city limitsWhat is mapped
Soil series mappedCopita 50 percent, Jimenez 20 percent, Lagloria 13 percent and Verick 11 percent
Texture at the surfacefine sandy loam 60 percent, very gravelly sandy clay loam 20 percent and silt loam 13 percent
Texture about 40 inches downbedrock 50 percent, variable 20 percent and cemented bedrock 11 percent
Engineering class about 40 inches downsilty clay (CL ML) 13 percent
Average clay content about 40 inches down21 percent
Bedrock mapped within 60 inches60 percent of the area (0 percent hard rock, 60 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel65 percent of the area

The USDA soil survey maps bedrock within five feet across 60% of El Cenizo, and the mapped bedrock is weathered rather than hard. A typical depth is 33 inches, so crews should expect slower drilling where the bore meets rock. Seasonal water tables are not mapped within five feet; flood prone soils cover 2%. High steel corrosion risk is mapped across 65%, so the line owner should consider casing and tracer wire materials. The Laredo Formation, of Eocene age, includes sandstone and clay, which can mean changing drill conditions along a route.

How do crews handle El Cenizo bedrock?

In El Cenizo, the 60% mapped bedrock share calls for a route plan that can adapt as the drill moves from soil into weathered rock. We track the head and log its depth and pitch as the bore advances.

  1. With Copita fine sandy loam along a route such as Hernandez Street, we ream in stages and keep the pipe ready before opening the final hole.
  2. Where the bore meets the mapped weathered bedrock of the Laredo Formation, a soil bit may work, but drilling slows and the soil to rock contact needs careful steering.
  3. El Cenizo has an average clay content of 21% at about 40 inches; where clay holds the hole, thinner fluid and staged reaming help manage the pull.
  4. Before drilling near a marked line on Rodriguez Street, we hydrovac pothole to expose it, then track the drill head from the surface and log depth and pitch.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

What is in the way of a new line near Hernandez Street in El Cenizo?

No highway is mapped inside El Cenizo or within 1.5 miles of its limits, so local street routes are the main surface feature to plan around. Hernandez Street runs 0.95 miles in the city, Rodriguez Street 0.92 miles and Morales Street 0.88 miles. Cadena Street runs 0.8 miles. A bore can pass beneath a street rather than cut across it, with entry and exit pits placed off the paved route where site conditions allow.

No railroad is mapped inside El Cenizo or within one mile outside its limits, so no local track crossing is identified for a bore plan. No streams are mapped inside or within one mile, and no street crossings of named streams are mapped. No lakes or ponds are mapped within one mile. If a future route reaches a railroad or water crossing beyond these mapped limits, its owner or jurisdiction must be identified during planning.

Who approves a bore on El Cenizo streets in Webb County?

El Cenizo is an incorporated city, so streets such as Hernandez and Rodriguez belong to the city; coordinate street access with the city before setting a bore route. No highway is mapped within 1.5 miles of the limits. If a proposed route reaches state highway right of way in Webb County, the TxDOT Laredo District reviews the utility permit, which the line owner files through RULIS. The applicable TxDOT cover rules depend on line type and crossing location, and the district can set a different depth.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the utility lines in El Cenizo and Webb County?

The water provider for a specific El Cenizo address has to be confirmed with the city, the county or the local water district before a bore is planned. EPA drinking water records do not tie a system to this town, so the provider must be checked for the project address. AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative report service in Webb County; we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric CooperativeElectric utilities reporting service in Webb CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put El Cenizo’s median year built at 1993; 3% of homes were built before 1960, 68% from 1960 to 1999, and 29% in 2000 or later. That mix can mean either replacement work or a new service along Rodriguez Street, so the existing line route needs checking. We hydrovac expose marked utilities before drilling near them because surface marks do not show their depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Do you cover El Cenizo and nearby La Presa?

El Cenizo is in Webb County, 6.3 miles southwest of La Presa and 2.5 miles southwest of Rio Bravo. The city covers 0.52 square miles at an elevation of 424 feet, and ZIP code 78046 serves its addresses. Laredo, the county seat and nearest larger city, is 15.8 miles north. From our Yukon, Oklahoma main office, El Cenizo is 650 road miles away and a 12.6 hour drive, a distance that affects crew mobilization and scheduling.

Places near El Cenizo

What boring work comes up near Rodriguez Street in El Cenizo?

  • Water service: A service bore along Morales Street can connect a property without opening the full street route, after the address water provider is confirmed.
  • Sewer replacement: A replacement route near Hernandez Street can pass beneath the street surface, with marked utilities exposed before drilling near them.
  • Fiber conduit: A conduit bore along Rodriguez Street can carry fiber while keeping the street surface intact where the route and access allow.
  • Electric conduit: For a route near Cadena Street, we confirm the line owner because several utilities report service in Webb County.
  • Large casing: A casing bore near a planned El Cenizo street route needs its size, footage and changing ground conditions included in the layout.
  • Nearby service: A route serving an address toward La Presa needs its own map pin and utility checks rather than assumptions based on the city center.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near Cadena Street in El Cenizo?

For a Cadena Street quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help us read the route. Note any pavement, utility crossings or access limits along Cadena so we can plan the entry and exit pits.

A short, clear route along Cadena is simpler to plan than one with many exposed utilities or hard access. The price depends on footage, pipe or conduit size, soil and rock, crossed utilities, pavement, pits, excavator time and sand backfill. Copita soil and bedrock mapped within five feet can change drilling time; a route near a state highway right of way needs permit planning, and the 650 road miles from Yukon affect mobilization. Emergency or high profile work can add planning needs.

Questions people ask about boring in El Cenizo

Does Trinity take directional boring jobs in El Cenizo, Webb County?

Yes, Trinity Boring Solutions takes directional boring work in El Cenizo and across Texas. Our own crews and partner contractor crews we have vetted can handle the work, while you deal with Trinity from the first call through the bore log. For a route near Hernandez Street, we plan the crew and approach around the actual scope.

Who controls Morales Street in El Cenizo, and does a bore have to cut it?

El Cenizo is incorporated, so its city streets, including Morales Street, belong to the city. Directional boring can put a line beneath a street without cutting the full surface, with pits at each side of the bore. The route, street access and surface conditions still need to be reviewed for the specific job.

How old are the buried lines near Rodriguez Street in El Cenizo?

The American Community Survey 2019 to 2023 estimates put the median home year in El Cenizo at 1993, with 68% of homes built from 1960 to 1999. Those housing dates do not establish the age of a buried line near Rodriguez Street. For a replacement bore, we locate and expose marked utilities before drilling close to them.

Does Copita soil in El Cenizo corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 65% of El Cenizo, including areas mapped as Copita soil. That is a planning concern for steel casing and tracer wire, not a pipe specification for every job. The line owner selects materials and any coating after the route and line requirements are confirmed.

What ground will a bore pass through in Copita soil in El Cenizo?

Copita is mapped across 50% of El Cenizo, and fine sandy loam covers 60% of the surface. At about 40 inches, bedrock is mapped under 50% of the area, while 13% is mapped as CL-ML. These USDA soil survey patterns help frame the plan, but they are not test borings along a particular route.

How much of El Cenizo has bedrock within five feet, and is it hard?

The USDA soil survey maps bedrock within five feet across 60% of El Cenizo, with weathered bedrock mapped across that same share. Hard bedrock is not mapped within five feet. A bore may still encounter different conditions along its alignment, so we plan for a slower transition where soil meets rock.

Does the distance from Yukon to Laredo change a bore job in El Cenizo?

Yes, the 650 road miles from our Yukon, Oklahoma main office affect mobilization for El Cenizo work. Laredo is 15.8 miles north of El Cenizo, but that nearby city does not change the distance our crews travel from Yukon. The route length, equipment needs and schedule all help shape the mobilization plan.

How much notice does Texas811 need for a bore on Hernandez Street in El Cenizo?

For a bore planned along Hernandez Street, submit the Texas811 locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, make a new request. Worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring near Hernandez Street in El Cenizo?

The job scope determines the price for a bore near Hernandez Street. Length, pipe or conduit size, Copita soil and mapped bedrock, utilities to expose, pavement, pits, excavator time and backfill all affect the plan. The 650 road miles from Yukon also affect mobilization, while emergency work or a difficult access route can add planning demands.

Where the El Cenizo facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in El Cenizo

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in El Cenizo, Texas

Type the address of your job in El Cenizo. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for El Cenizo

Same county: Ranchos Penitas West · Pueblo Nuevo · Bruni · Mirando City · Oilton · San Carlos I · Colorado Acres · Ranchitos Las Lomas · San Carlos II · Ranchitos East · Los Arcos · Botines. All counties: Texas county list.