Bruni Texas Directional Boring: Delmita Soil, Texas State Highway 359 and CPKC Track
Quick Answer: The USDA soil survey maps fine sandy loam at Bruni’s surface and cemented material at about 40 inches below it. Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), to place lines beneath Texas State Highway 359 and Bruni streets. Bruni is 636 road miles from our Yukon yard, and CPKC (Kansas City Southern) track is one crossing to plan around. Delmita soil covers 75 percent of the mapped area, so the deeper material matters when setting the bore path.
Bruni bores at a glance
- Unincorporated community in Webb County, Texas. Population 251 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 636 miles, about 12.8 hours of driving.
- Ground: Delmita soil is mapped on 75 percent of the area, with cemented material about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Texas State Highway 359 and FM 2050. State permit office: TxDOT Laredo District.
- Railroad track inside the boundary: CPKC (Kansas City Southern), with 4 mapped street and rail crossings.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring beneath Texas State Highway 359 in Bruni?
Trinity Boring Solutions takes directional boring work in Bruni, Webb County, including beneath Texas State Highway 359 and along local streets. The USDA soil survey maps fine sandy loam at the surface and cemented material at about 40 inches. The 2020 Census counted 251 people here; water, sewer, gas, electric conduit and fiber bores can follow Avenue G or other mapped streets where a route is needed.
Our main office is in Yukon, Oklahoma, and Bruni work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982 while planning underground routes for Bruni projects. The range runs from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet, for routes such as Avenue D or Texas State Highway 359.

What ground does Delmita soil mean for a bore in Bruni?
The USDA soil survey maps Delmita soil across 75 percent of Bruni and Cuevitas soil across 25 percent. The mapped surface texture is fine sandy loam across 99 percent of the area. At about 40 inches below the surface, cemented material is mapped throughout the area. The survey maps no sandy or heavy clay ground at that depth. These are mapped soil patterns, not test borings, so the exact material along Avenue G still needs to be checked as the bore is planned.
| USDA soil survey, inside the Bruni mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Delmita 75 percent and Cuevitas 25 percent |
| Texture at the surface | fine sandy loam 99 percent |
| Texture about 40 inches down | cemented material 100 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
Bedrock is not mapped in the top five feet of Bruni, but the Goliad Formation appears on the geologic map below, with descriptions from the Cenozoic and Miocene. That formation includes clay, sandstone, marl, caliche, limestone and conglomerate, so deeper conditions may change the drilling response. The soil survey maps no seasonal water table, flood prone soils or high steel corrosion risk in the area. Arroyo de Los Angeles is 0.3 miles from the mapped community boundary, so a route near it needs its own crossing review.
How do we drill Bruni’s cemented material?
For a Bruni bore, we plan around the fine sandy loam surface and the cemented material mapped at about 40 inches, then adjust the equipment and reaming plan to what the route reveals.
- Along a Bruni route mapped as fine sandy loam, we track the drill head from the surface and log depth and pitch as the bore advances.
- Where the Bruni soil survey maps cemented material at about 40 inches, we watch the bit response and plan staged reaming for the actual route.
- Before drilling near marked lines along Avenue G, we hydrovac pothole each utility on the bore path; paint marks position, not depth.
- For a Bruni crossing beneath Texas State Highway 359, we keep the pavement uncut and place entry and exit pits in dirt beside the route.

Which roads and tracks could a Bruni bore cross near Avenue G?
A Bruni bore can be routed beneath Texas State Highway 359, FM 2050 or local streets such as Avenue G, Avenue D and Avenue East. The mapped community boundary contains 1.2 roadway miles of Texas State Highway 359 and 1.0 roadway mile of FM 2050. Avenue G is the longest named street at 1.01 miles, followed by Avenue D at 0.96 miles and Avenue East at 0.82 miles. A bore beneath existing highway pavement is installed by boring or tunneling, not by opening the pavement.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 359 | State highway | 1.2 roadway miles inside | State highway office |
| FM 2050 | State highway | 1 roadway miles inside | State highway office |
| CPKC (Kansas City Southern) | Railroad | 1.31 track miles inside | The railroad |
| Arroyo de Los Angeles | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
CPKC (Kansas City Southern) has 1.31 track miles within Bruni, and public mapping shows 4 street and rail crossings in the community. The railroad that owns the track must agree to a rail crossing, with its agreement setting crossing conditions. No stream is mapped inside Bruni, and no street crossing of a named stream is mapped there. Arroyo de Los Angeles lies 0.3 miles from the boundary; no lakes or ponds are mapped within one mile.
Who approves a Bruni bore in Webb County?
Bruni is an unincorporated community, so its streets have no city government; the county or state has authority according to the road. For work in the Texas State Highway 359 or FM 2050 right of way, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Laredo District reviews it. We prepare the bore plan and profile for the owner’s application and work under its permit. CPKC (Kansas City Southern) must agree to a track crossing. No stream is mapped inside the community; a planned water crossing near Arroyo de Los Angeles is checked for Corps jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities may have lines in Bruni, Webb County?
Before we plan a bore for a Bruni address, we confirm the water provider with the county or local water district. AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative report electric service in Webb County, but that does not identify the provider at every address. Before an electric conduit bore along Avenue East or elsewhere in Bruni, we confirm who owns the line and who can verify the conduit requirements.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative | Electric utilities reporting service in Webb County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Bruni’s median housing year at 1969; 23 percent of housing was built before 1960, 57 percent from 1960 to 1999 and 20 percent in 2000 or later. That mix may mean a job replaces an older line or serves newer construction. Along Avenue D, we expose marked utilities by hydrovac before drilling near them, because locate paint shows position but not depth.

Do you cover Bruni and nearby Oilton?
Bruni is an unincorporated community in Webb County, 41.3 miles east of Laredo, the county seat and nearest larger city. Its mapped area is 1.31 square miles, elevation is 774 feet, and its ZIP code is 78344. Oilton is 8.8 miles west, Mirando City is 10.4 miles west, and Hebbronville is 11.5 miles southeast. Our Yukon, Oklahoma yard is 636 road miles away, a 12.8 hour drive, so that distance is part of planning a Texas State Highway 359 job.
Places near Bruni
- Directional boring in Oilton: 8.8 miles west
- Directional boring in Mirando City: 10.4 miles west
- Directional boring in Hebbronville: 11.5 miles southeast
- Directional boring in Thompsonville: 12 miles south
- Directional boring in Las Lomitas: 12.1 miles southeast
- Directional boring in Laredo: 41.3 miles west
What kinds of bores could come up near Arroyo de Los Angeles in Bruni?
- Highway crossing: A bore beneath Texas State Highway 359 needs a route and cover plan that meets TxDOT review while leaving the existing pavement uncut.
- Street service: A water or sewer service can follow Avenue D, with the address specific water provider confirmed before the bore is planned.
- Fiber conduit: A fiber route along Avenue G can avoid an open cut across the street when the bore path and marked utilities are checked.
- Rail crossing: A line crossing CPKC (Kansas City Southern) needs the railroad owner’s agreement before the bore proceeds beneath its track.
- Drainage area: A proposed route near Arroyo de Los Angeles needs site planning for the water crossing, even though no stream is mapped inside Bruni.
- Electric conduit: Along Avenue East, we confirm the line owner and expose marked utilities before drilling near the planned conduit route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Bruni bore near CPKC (Kansas City Southern)?
A map pin matters in Bruni because a route near Avenue G may have different road, utility or track crossings than one along FM 2050. For a Bruni bore, send us the address or pin, what will go underground, the pipe or conduit size, and the footage. A sketch or plans showing the route toward Texas State Highway 359 or CPKC (Kansas City Southern) help us define the work.
A Bruni bore is simpler to plan when its route is clear, the utility marks are available and it avoids pavement, track or drainage crossings. Length, pipe size, Delmita soil and the cemented material mapped below the surface affect the drilling plan. The number of utilities to expose, work under Texas State Highway 359, CPKC track conditions, pits and excavator time also matter. Mobilization is shaped by the 636 road miles from Yukon, while emergency or high profile work can change the scope.
Questions people ask about boring in Bruni
Does Trinity take directional boring jobs in Bruni, Webb County, and who staffs them?
Yes. Trinity Boring Solutions takes directional boring work in Bruni, and our own crews or crews from partner drilling contractors we have vetted can staff the job. Our main office is in Yukon, Oklahoma, not Bruni. We stay involved from the first call through the bore log, including work on Avenue G.
Who owns electric lines in Bruni, Webb County, and who confirms conduit specs?
The specific line owner must be confirmed for the Bruni address before we plan an electric conduit bore. AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative report service in Webb County, but those records do not establish which provider serves Avenue East or any other particular address. The owner can confirm conduit requirements.
Does Webb County or a city control Avenue East in Bruni, and must we cut it?
Bruni has no city government, so its streets fall under county authority rather than a city street department. A bore along Avenue East can pass beneath the street without cutting the paved route. We check the route and marked utilities first, and road work in a state right of way follows the separate TxDOT process.
How old are buried lines near Avenue D in Bruni, and can replacement use a bore?
The American Community Survey 2019 to 2023 five year estimates put Bruni’s median housing year at 1969, with 23 percent built before 1960. That age can make a replacement line different from a new service at newer construction. Near Avenue D, we pothole marked utilities on the bore path before drilling close to them.
What ground does a Bruni bore cross in Delmita soil?
The USDA soil survey maps Delmita soil across 75 percent of Bruni, with fine sandy loam at the surface and cemented material at about 40 inches. For Bruni, these mapped patterns guide underground planning, but they are not test borings. For an Avenue G route, the change in material may affect bit response and the reaming plan.
Will a Bruni bore hit rock below the mapped soils?
Bedrock is not mapped in the top five feet of Bruni, but the geologic map shows the Goliad Formation below. Its mapped descriptions include limestone, sandstone and conglomerate as well as clay and marl. That does not establish what a particular bore will encounter, so a route near FM 2050 needs its own depth and ground review.
What bore sizes and lengths can Trinity handle for Avenue C in Bruni?
For an Avenue C job, Trinity handles lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The appropriate size and length depend on what the route needs to carry and the ground or crossings along the planned Bruni alignment.
How much notice does Texas811 need for a Bruni bore near Avenue G?
For work near Avenue G, count back at least two working days, or 48 hours, before excavation; Saturdays, Sundays and legal holidays do not count. The request cannot be made earlier than 14 days before the start. If work slips more than 14 days past the original notice, make a new request, and have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of a Bruni bore beneath Texas State Highway 359?
The route length, pipe size, soil and cemented material, utility exposures, pavement, pits and equipment time all shape the scope. Work beneath Texas State Highway 359 adds highway planning, while a CPKC track crossing has separate crossing conditions. Mobilization also reflects the 636 road miles between Bruni and our Yukon yard. We do not set a price from footage alone.
Where the Bruni facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Bruni
- U.S. Census Bureau, TIGER/Line 2024: Bruni boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Bruni population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Bruni housing units and year built
- Macrostrat geologic map compilation: map units under Bruni
- U.S. Department of Transportation, North American Rail Network: track owners in Webb County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Webb County
- U.S. Geological Survey, Elevation Point Query Service: Bruni elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Bruni
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Bruni
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Bruni, Texas
Type the address of your job in Bruni. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Bruni
Same county: Rio Bravo · El Cenizo · Ranchos Penitas West · Pueblo Nuevo · La Presa · San Carlos I · Colorado Acres · Ranchitos Las Lomas · San Carlos II · Tanquecitos South Acres · Ranchitos East · Los Altos. All counties: Texas county list.
