trinityboringsolutions.com

Oilton Texas Directional Boring: Delmita Soil, Texas Highway 359 and CPKC Track

Quick Answer: Texas State Highway 359 and the CPKC (Kansas City Southern) track are key crossings for directional boring and horizontal directional drilling (HDD) in Oilton, Texas. Oilton is 649 road miles from our Yukon, Oklahoma main office, with J C Perez Road among the streets a route may follow. Delmita soil covers 58 percent of the mapped area, and cemented material mapped at about 40 inches can affect how we plan the bore. We select the route and equipment for the ground and each crossing.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Oilton bores at a glance

  • Unincorporated community in Webb County, Texas. Population 270 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 649 miles, about 12.9 hours of driving.
  • Ground: Delmita soil is mapped on 58 percent of the area, with cemented material about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 359. State permit office: TxDOT Laredo District.
  • Railroad track inside the boundary: CPKC (Kansas City Southern), with 1 mapped street and rail crossings.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Oilton along Texas State Highway 359?

Texas State Highway 359 and the CPKC (Kansas City Southern) track are local features we plan around when we take directional boring work in Oilton. The 2020 Census counted 270 people in this unincorporated Webb County community. Our crews install water, sewer, gas, electric conduit and fiber lines along streets such as J C Perez Road, or route them beneath a road or track where the plan requires a crossing.

Our main office is in Yukon, Oklahoma, and Oilton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have drilled directionally since 1982. That experience helps us plan around the Delmita soil and cemented material mapped beneath Oilton, rather than treating every street route as the same ground.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Delmita soil affect a bore in Oilton?

Delmita soil is mapped across 58 percent of Oilton, with Cuevitas soil across the other 42 percent. The USDA soil survey maps fine sandy loam at the surface across 99 percent of the area and cemented material at about 40 inches across 99 percent. Average clay content at that depth is 14 percent, and only 1 percent is mapped as sandy there. For Oilton crossings, we treat mapped soil patterns as planning context, not as a substitute for test borings. We use them to plan a route and expect ground conditions to vary from one bore location to another.

USDA soil survey, inside the Oilton mapped community boundaryWhat is mapped
Soil series mappedDelmita 58 percent and Cuevitas 42 percent
Texture at the surfacefine sandy loam 99 percent
Texture about 40 inches downcemented material 99 percent
Average clay content about 40 inches down14 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

Bedrock is not mapped in the top five feet in Oilton, and the soil survey maps no seasonal water table, flood prone soils or high steel corrosion risk. That helps with pit and casing planning, but it does not rule out deeper rock. The geologic map identifies the Goliad Formation, including Cenozoic clay, sandstone, marl and limestone with a cemented gravel cap, and a Miocene description that also includes caliche and conglomerate. Those layers can change drilling resistance, so we confirm conditions as work proceeds.

How is a bore run through Oilton cemented material?

We plan each Oilton bore around the cemented material mapped near 40 inches and the route’s crossings, including Texas State Highway 359. The plan sets the entry and exit pits before drilling starts.

  1. We compare the route with the Delmita and Cuevitas soil patterns, then set entry and exit pits where J C Perez Road access allows.
  2. Before drilling near a marked line along Laredo Avenue, we use hydrovac potholing to expose it because paint alone does not show depth.
  3. We track the drill head from the surface and record its depth and pitch as it advances through Oilton’s mapped cemented material.
  4. For a Texas State Highway 359 crossing, we plan the bore beneath the travel lanes and follow the cover conditions in the approved permit.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What can an Oilton bore cross near CPKC (Kansas City Southern)?

Texas State Highway 359 runs through the mapped Oilton community boundary, with 1.6 roadway miles inside it. Welhousen Road is the longest named street at 0.9 miles, followed by J C Perez Road at 0.61 miles and Laredo Avenue at 0.59 miles. A route may need to pass beneath a street or the highway without cutting its surface. We check pavement, access for the pits and the line path before choosing a bore plan for any of those crossings.

CrossingTypeMapped extentWho has a say
Texas State Highway 359State highway1.6 roadway miles insideState highway office
CPKC (Kansas City Southern)Railroad0.96 track miles insideThe railroad
Swipe the table sideways to see every column.

The CPKC (Kansas City Southern) Laredo Subdivision has 0.96 track miles in Oilton, and public mapping shows one street and rail crossing inside the community. A bore near the track needs the railroad’s crossing agreement, which sets the crossing conditions. No streams are mapped inside Oilton or within one mile, and there are no mapped lakes or ponds within one mile. That leaves the track and road crossings as the mapped obstacles for a typical route.

Who approves an Oilton bore in Webb County?

Oilton has no city government, so streets in the unincorporated community fall to the county, while Texas State Highway 359 is under state jurisdiction. For work in the highway right of way, the line owner, not the driller, applies through TxDOT’s online RULIS system. The TxDOT Laredo District reviews it; we prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. TxDOT cover rules set 60 inches for electric and communication lines crossing a highway, 60 inches for water crossings and 60 inches for pressurized sewer crossings. The CPKC track requires an agreement from the railroad that owns it.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve addresses in Oilton, Webb County?

The water provider for the specific Oilton address has to be confirmed with the county or local water district before a bore is planned. A public water system could not be matched to the community by name in EPA records. AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative report electric service in Webb County, but the line owner must be confirmed for the address before an electric conduit bore is planned.

Line ownerWhat it isSourceSize
AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric CooperativeElectric utilities reporting service in Webb CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 estimates put Oilton’s median housing year at 1976; 29 percent of homes were built before 1960, while 28 percent date from 2000 or later. A replacement line along Ramona Avenue may meet older buried utilities, while a new service may need a different route. We locate and expose marked utilities on the bore path before drilling near them, since surface marks show position but not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Where is Oilton near Mirando City?

Oilton is in Webb County, at an elevation of 832 feet, and covers 1.42 square miles of mapped community area. Its ZIP code is 78371. Mirando City is 2.9 miles southwest, Aguilares is 7.8 miles west and Bruni is 8.8 miles east. Laredo, the county seat and nearest larger city listed, is 32.6 miles west. Our Yukon, Oklahoma yard is 649 road miles away, a 12.9 hour drive, so distance is part of planning crew mobilization for an Oilton job.

Places near Oilton

What kinds of bores come up along Oilton’s J C Perez Road?

  • Highway crossing: A line beneath Texas State Highway 359 can be installed by boring, keeping the highway surface uncut.
  • Water service: A bore near Ramona Avenue can route a water line while leaving the street surface intact.
  • Fiber route: Fiber conduit along Welhousen Road can be placed by bore, with marked utilities exposed first.
  • Rail crossing: A route beneath the CPKC track needs the railroad agreement and its crossing conditions.
  • Electric conduit: Before a conduit bore near Laredo Avenue, we confirm the line owner for that address.
  • Street replacement: A new line beside J C Perez Road can avoid open cutting the street with a planned bore.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Oilton work near Ramona Avenue?

For an Oilton quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Ramona Avenue can differ from one under Texas State Highway 359, so a clear crossing location helps us understand the work before we plan it.

The Delmita soil and cemented material mapped below it make ground conditions a leading price factor because they affect drilling and reaming. The number of utilities to expose, pipe size, bore length and pavement also shape the work. A Texas State Highway 359 crossing adds permit and cover planning, while the CPKC track brings a railroad agreement into the route. Mobilizing from our Yukon yard also matters at 649 road miles from Oilton.

Questions people ask about boring in Oilton

Does Trinity Boring Solutions take Oilton jobs in Webb County, and how are crews assigned?

Yes, we take directional boring work in Oilton, and our own crews handle jobs with support from partner contractor satellite yards we have vetted. We coordinate with Trinity from the first call through the bore log for Oilton work. For a route near Texas State Highway 359, we plan the crew and equipment around the job’s crossings and ground.

Who approves a bore beneath Texas State Highway 359 in Oilton?

TxDOT reviews a Texas State Highway 359 right of way application through its Laredo District. The utility owner files in the online RULIS system, not the drilling contractor. We prepare the bore plan and profile for that filing and work under the permit issued to the owner. Highway cover requirements are set in the permit and state rules.

What does an Oilton bore under CPKC (Kansas City Southern) track require?

A bore under the CPKC (Kansas City Southern) track requires an agreement from the railroad that owns it. The agreement sets conditions such as casing, depth and flagging. Public mapping shows 0.96 track miles in Oilton, including one street and rail crossing, so we account for the track in the route plan.

Who owns electric lines in Oilton, Webb County, and who confirms conduit details?

The specific electric line owner must be confirmed for the Oilton address before we plan a conduit bore. AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative report service in Webb County, but that does not establish which provider serves a particular address. The line owner confirms conduit specifications for its line.

Who controls Laredo Avenue in Oilton, and does a bore require cutting it?

Oilton is an unincorporated community with no city government, so Laredo Avenue is not a city street. County or state authority depends on the road and work location. A directional bore can pass beneath the street without cutting its surface; the route and pit locations determine how the work is set up.

How old are buried lines near Oilton’s J C Perez Road, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 estimates put the median housing year in Oilton at 1976, with 29 percent of homes built before 1960. That does not date a specific buried line near J C Perez Road, so we expose marked utilities on the route before drilling close to them.

Does Trinity cover Mirando City and rural sites outside Oilton?

Yes, Trinity takes work in Texas beyond Oilton, including nearby Mirando City and rural sites. Mirando City is 2.9 miles southwest of Oilton, but each location needs its own route and site details. We consider the address, crossings and ground before planning a bore.

How much notice does Texas811 need for an Oilton bore near Welhousen Road?

For work near Welhousen Road, Texas law requires a locate request at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If an Oilton start slips more than 14 days past the original notice, we submit a new request for the crossing. Before continuing Oilton work, we refresh worn or moved marks through Texas811 for the planned bore.

What affects the cost of an Oilton bore near Texas State Highway 359?

The Delmita soil and cemented material mapped in Oilton are major considerations because they can change drilling effort. Length, pipe or conduit size, utilities to expose, pavement, and creek or drainage crossings also affect the work. A Texas State Highway 359 permit route and mobilization from Yukon add planning demands.

Where the Oilton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Oilton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Oilton, Texas

Type the address of your job in Oilton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page