trinityboringsolutions.com

Botines Texas Directional Boring: Copita Fine Sandy Loam, US 83, Sombreritillo Creek

Quick Answer: Botines is an unincorporated community in Webb County, so streets such as Well Lane belong to county or state authorities, not a city government. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), for routes crossing US 83 and local roads in Botines, Texas. Botines is 618 road miles from our Yukon, Oklahoma main office, with Well Lane among the routes a crew may reach. Copita soil covers 84 percent of the mapped area, and shallow weathered bedrock can slow a bore.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Botines bores at a glance

  • Unincorporated community in Webb County, Texas. Population 149 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 618 miles, about 11.8 hours of driving.
  • Ground: Copita soil is mapped on 84 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 84 percent of the area.
  • Highways inside the boundary: US 83. State permit office: TxDOT Laredo District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring on Well Lane in Botines?

Trinity Boring Solutions handles directional boring in Botines, Webb County, for routes along Well Lane, Garza-Jones Lane and US 83. Botines is an unincorporated community with 149 residents in the 2020 Census count; the Census Bureau does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber where services need to follow those roads or reach properties off them.

Our main office is in Yukon, Oklahoma, and Botines work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. The family business dates to 1965, and directional boring has been part of it since 1982. That range suits a service route off Well Lane or a larger casing run, from 3/4 inch service lines through 48 inch casing.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What does Copita soil mean for a bore in Botines?

Copita fine sandy loam is the main mapped soil in Botines, covering 84 percent of the area in the USDA soil survey. At about 40 inches below the surface, the survey maps bedrock across 84 percent, clay across 11 percent and clay loam across 4 percent. For directional boring in Botines, we account for the average clay content at that depth, which is 44 percent. The surface is mostly fine sandy loam, but shallow bedrock is the larger concern for a bore plan than sandy ground at depth.

USDA soil survey, inside the Botines mapped community boundaryWhat is mapped
Soil series mappedCopita 84 percent, Catarina 10 percent and Palafox 4 percent
Texture at the surfacefine sandy loam 84 percent, clay 11 percent and clay loam 4 percent
Texture about 40 inches downbedrock 84 percent, clay 11 percent and clay loam 4 percent
Engineering class about 40 inches downfat clay (CH) 11 percent and lean clay (CL) 5 percent
Average clay content about 40 inches down44 percent
Bedrock mapped within 60 inches84 percent of the area (0 percent hard rock, 84 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 84 percent of Botines, with a typical depth of 37 inches; hard bedrock is not mapped at that depth. That points to slower drilling through weathered material, rather than a hard rock setup. Seasonal water table and flood prone soils are not mapped in the top 60 inches. High steel corrosion risk is mapped across 100 percent, so the line owner should consider casing and tracer wire materials; HDPE does not share that concern. The Eocene Laredo Formation includes sandstone and clay, which can bring changing ground conditions along a bore.

How do crews handle bedrock while boring in Botines?

For a Botines bore, the USDA survey’s shallow weathered bedrock and Copita soil call for a plan that adjusts to the ground as the head advances.

  1. Copita fine sandy loam covers most of Botines, but the survey maps bedrock near the surface; we match the cutting setup to the material encountered.
  2. Where clay is present, including mapped heavy clay, we use thinner fluid and staged reaming to limit sticky buildup and keep the bore moving.
  3. Weathered bedrock is mapped at a typical depth of 37 inches, so we allow for slower progress and watch the head as ground conditions change.
  4. Before a bore near Well Lane, we hydrovac marked lines and track the drill head from the surface, logging depth and pitch as it advances.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Which roads, tracks or creeks affect a Botines bore near US 83?

US 83 runs for 1.2 mapped roadway miles inside the Botines community boundary, while Interstate 35 is 0.4 miles outside it. A route beneath US 83 needs a planned crossing rather than an open cut through pavement. Well Lane is the longest named local street at 1.22 miles; Garza-Jones Lane runs 0.75 miles and Pearson-Moss Road runs 0.64 miles. Those roads help define service routes, access points and where existing utilities need to be checked before drilling.

CrossingTypeMapped extentWho has a say
US 83US highway1.2 roadway miles insideState highway office
Interstate 35Highway nearby0.4 miles outsideState highway office
Union PacificRailroad nearby0.5 miles outsideThe railroad
Sombreritillo CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific track is 0.5 miles outside the mapped Botines boundary, and no street and rail crossings are mapped inside the community. Sombreritillo Creek is 0.7 miles outside the boundary; no named stream or street crossing of a named stream is mapped inside it. The survey maps 0.18 miles of unnamed drainage within Botines, so a route near that drainage still needs site specific planning. When planning underground work in Botines, we use the map finding that no lakes or ponds are mapped within one mile.

Who approves a Botines bore in Webb County?

Botines has no city government, so local street and permit authority rests with Webb County or the state, depending on the road. A bore in US 83 right of way needs a TxDOT utility permit reviewed by the TxDOT Laredo District. The utility owner submits the application through RULIS; we prepare the bore plan and profile and work under the owner’s permit. TxDOT cover rules set crossing depth at 60 inches for electric, communication and water lines. Existing highway pavement is bored or tunneled, with casing; a Union Pacific track crossing needs an agreement with the railroad, and Sombreritillo Creek is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines may be buried in Botines, Webb County?

Before we plan a bore at a Botines address, we confirm its water provider with the county or local water district. AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative report electric service in Webb County, but the line owner for the address must be confirmed before an electric conduit bore. Along Well Lane, we hydrovac marked utilities before drilling near them; paint shows position, not depth.

Line ownerWhat it isSourceSize
AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric CooperativeElectric utilities reporting service in Webb CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing data is not published for a place as small as Botines, so the age of buried lines cannot be inferred from a reliable local housing survey. On routes such as Garza-Jones Lane, service runs and existing lines need to be checked at the actual address. September averages 3.9 inches of precipitation and January 0.9 inches, which gives the crew seasonal context for access and pits. We expose each marked utility on the bore path before the drill approaches it.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

How far is Botines from Los Veteranos II and our Yukon yard?

Botines is in Webb County at an elevation of 722 feet and covers 1.9 square miles. Its ZIP code is 78045. Los Veteranos II is 0.8 miles east, Sunset Acres is 1.5 miles north, Four Points is 1.7 miles north and Bonanza Hills is 1.8 miles northwest. Laredo, the county seat and nearest larger city, is 14.7 miles south. Botines is 618 road miles and an 11.8 hour drive from our Yukon, Oklahoma main office, a distance that can affect mobilization for a bore.

Places near Botines

Which jobs call for a bore near Pearson-Moss Road in Botines?

  • Highway crossing: A bore beneath US 83 keeps the route below the roadway instead of cutting across its pavement.
  • Water service: A service route from Well Lane can be planned after the water provider for that address is confirmed.
  • Fiber route: A conduit bore along Garza-Jones Lane can connect a property while keeping the surface route untrenched.
  • Drainage crossing: A route near the unnamed drainage mapped in Botines needs a plan for the channel and work access.
  • Rail crossing: A proposed route near Union Pacific track outside Botines needs the railroad’s agreement before the crossing is planned.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a Botines bore quote near Sombreritillo Creek?

For a Botines quote, tell us where the work is, what goes underground, the pipe or conduit size and the footage. A map pin off Sombreritillo Creek, for example, identifies the route; a sketch can show how it relates to the channel. Plans help us check crossings such as US 83 before setting the bore scope.

The price reflects the ground, crossings and logistics at the Botines site. Copita soil and weathered bedrock affect drilling time; US 83, marked utilities and any concrete or pavement affect the crossing plan. Creek or drainage conditions, pits, excavator time and sand backfill can change the work as well. Mobilization is part of the scope for a location 618 road miles from Yukon, and high profile or emergency work can add planning needs.

Questions people ask about boring in Botines

Does Trinity Boring Solutions take directional boring work in Botines, Webb County?

Yes. We take directional boring work in Botines and staff it with our own crews or from satellite yards run by drilling partners we have vetted. The work remains with Trinity from the initial call through the bore log, whether the crew reaches the job from Yukon or a partner yard.

Who controls the streets in Botines, and can a bore avoid cutting Pearson-Moss Road?

Botines is unincorporated, so it has no city government; street authority rests with the county or state, depending on the road. A bore can pass beneath Pearson-Moss Road without cutting its surface when the route and ground allow. The road owner’s approval applies to work in its right of way.

Can you tell how old buried lines are near Garza-Jones Lane in Botines?

No reliable local housing age data is published for Botines, so it does not establish the age of buried lines near Garza-Jones Lane. For a replacement bore, we locate and expose marked utilities along the planned route before drilling near them. That confirms actual line positions instead of relying on assumed ages.

Does Copita soil in Botines corrode steel, and what pipe should we use?

The USDA survey maps high steel corrosion risk across 100 percent of Botines, including areas mapped as Copita soil. The line owner should choose coatings for steel casing or tracer wire. HDPE does not share the soil corrosion concern, but the right material depends on the line and the owner’s specifications.

What ground does a bore pass through in Botines Copita soil?

The USDA soil survey maps Copita fine sandy loam across 84 percent of Botines. At about 40 inches down, it maps bedrock across 84 percent, with clay across 11 percent and clay loam across 4 percent. These are mapped patterns, not test borings, so the actual route can differ.

Is there rock in Botines, and is it hard or weathered?

Yes. In Botines, bedrock is mapped within five feet across 84 percent of the area, and the mapped bedrock is weathered rather than hard. Its typical depth is 37 inches. That can slow the bore, though the USDA survey describes mapped conditions rather than the exact ground at an individual address.

Does Trinity cover Los Veteranos II and rural sites outside Botines?

Yes. Trinity takes work across Texas, including locations near Los Veteranos II and rural sites beyond the mapped Botines community boundary. The service area does not depend on a town government. Share the address or map pin so we can assess the route, access and scope.

How much Texas811 notice do I need for a bore near Well Lane in Botines?

For a bore near Well Lane, Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start moves more than 14 days past the original notice, request again. In Botines, we have worn or moved marks refreshed through Texas811 before we continue underground work.

What affects the cost of a directional bore near US 83 in Botines?

The price depends on the route and work involved near US 83, not on footage alone. Copita soil and shallow weathered bedrock affect drilling; pavement, utility crossings, drainage, pits and excavator time affect the setup. Mobilization also matters for a site 618 road miles from Yukon. We need the route and scope to assess those factors.

Where the Botines facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Botines

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Botines, Texas

Type the address of your job in Botines. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Botines

Same county: Rio Bravo · El Cenizo · Ranchos Penitas West · Pueblo Nuevo · Bruni · Mirando City · Oilton · La Presa · San Carlos I · Colorado Acres · Ranchitos Las Lomas · San Carlos II. All counties: Texas county list.