trinityboringsolutions.com

Rio Bravo Texas Directional Boring: Copita Fine Sandy Loam, US 83, Río Grande

Quick Answer: In Rio Bravo, Copita fine sandy loam can loosen behind a reamer, and our directional boring, also called horizontal directional drilling (HDD), can pass beneath US 83. Centeno Lane is one local route to consider, while the Yukon main office is 647 road miles away. The USDA soil survey maps bedrock within 40 inches across much of Rio Bravo, so the bore plan needs to account for shallow weathered rock. US 83 work also calls for highway planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Rio Bravo bores at a glance

  • Incorporated city in Webb County, Texas. Population 4,436 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 647 miles, about 12.5 hours of driving.
  • Ground: Copita soil is mapped on 50 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 65 percent of the area.
  • Highways inside the boundary: US 83. State permit office: TxDOT Laredo District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring on Centeno Lane in Rio Bravo?

Trinity Boring Solutions takes directional boring jobs in Rio Bravo, Webb County, where the Census Bureau Vintage 2024 estimate puts the population at 4,436. Copita fine sandy loam can shift during drilling. For a route on Centeno Lane, we install water, sewer, gas, electric conduit and fiber lines by boring beneath the street or nearby access areas.

Our main office is in Yukon, Oklahoma, and Rio Bravo work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have drilled directionally since 1982. For a Centeno Lane service or utility route, we handle sizes from 3/4 inch service lines to 48 inch casing and bore lengths from 10 feet to 5,000 feet.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What is Copita soil like to bore in Rio Bravo?

Copita soil is the largest mapped series in Rio Bravo, covering 50 percent of the city, and the USDA soil survey identifies it as fine sandy loam with 0 to 3 percent slopes. Fine sandy loam makes up 65 percent of mapped surface texture. At about 40 inches below the surface, bedrock is mapped across 50 percent and cemented bedrock across 15 percent; silt loam accounts for 20 percent. We treat mapped Copita soil patterns as planning context, not as test borings for Rio Bravo installations. A route can change between soil and rock over a short distance.

USDA soil survey, inside the Rio Bravo city limitsWhat is mapped
Soil series mappedCopita 50 percent, Lagloria 27 percent, Verick 15 percent and Rio Grande 5 percent
Texture at the surfacefine sandy loam 65 percent, silt loam 27 percent and very fine sandy loam 5 percent
Texture about 40 inches downbedrock 50 percent, silt loam 20 percent and cemented bedrock 15 percent
Engineering class about 40 inches downsilty clay (CL ML) 27 percent and lean clay (CL) 5 percent
Average clay content about 40 inches down14 percent
Bedrock mapped within 60 inches65 percent of the area (0 percent hard rock, 65 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel82 percent of the area

The USDA soil survey maps bedrock within 60 inches across 65 percent of Rio Bravo, with weathered bedrock in that area; hard bedrock is not mapped within that depth. Typical mapped bedrock depth is 32 inches, so a bore may slow where it meets rock. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 5 percent. High steel corrosion risk is mapped across 82 percent, a concern for steel casing and tracer wire; the line owner chooses coatings. The geologic map lists Alluvium, undivided, of Cenozoic age, with mixed gravel, sand, silt and clay.

How do we bore through bedrock in Rio Bravo?

In Rio Bravo, mapped bedrock near the surface and Copita fine sandy loam call for checking ground conditions as the bore advances. US 83 and Centeno Lane routes also shape access and the bore plan.

  1. Copita fine sandy loam is common in Rio Bravo; we adjust drilling fluid and ream in stages so loose material does not wash out or leave the hole unsupported.
  2. Because bedrock is mapped within 40 inches across much of Rio Bravo, we track depth and pitch as the drill advances and slow down where weathered rock resists the bit.
  3. At Centeno Lane, we hydrovac pothole each marked utility on the planned path before drilling near it; surface paint shows position, not burial depth.
  4. For a route beneath US 83, the bore plan accounts for pavement and required cover; pits stay on the sides rather than cutting the highway surface.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Where might a Rio Bravo line go under US 83?

US 83 runs 0.6 mapped roadway miles inside Rio Bravo, so a crossing there needs a route planned beneath the highway rather than through its pavement. Centeno Lane is the city’s longest named street at 1.68 miles, followed by Margarita Lane at 1.53 miles and Espejo Molina Road at 1.06 miles. Paseo de Tiber Road adds another named route. These streets give a project clear local reference points, but the address and line path determine whether a street crossing is needed.

CrossingTypeMapped extentWho has a say
US 83US highway0.6 roadway miles insideState highway office
Río GrandeStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
O Keefe LakeLake or pond161 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Rio Bravo or within one mile outside its limits, and no street and rail crossings are mapped in the city. No named stream or street crossing of a named stream is mapped inside the limits. The Río Grande is 0.2 miles from the city limits, and O Keefe Lake lies within one mile outside them. A proposed water crossing near the Río Grande or lake needs a site specific review during planning.

Who permits a Rio Bravo bore in Webb County?

For a bore beneath US 83 in Rio Bravo, the line owner applies for a TxDOT utility permit through RULIS, and the TxDOT Laredo District reviews it. The utility owner, not the drilling contractor, files; we prepare the bore plan and profile for that application and work under its permit. TxDOT rules call for boring or tunneling beneath existing highway pavement, with required cover set by line type and permit conditions. Because Rio Bravo is incorporated, we plan Centeno Lane boring as work on a city street. A Río Grande crossing is checked for Army Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are buried in Webb County near Rio Bravo?

The water provider for a specific Rio Bravo address must be confirmed with the city, Webb County or the local water district before a bore is planned; public records do not match a provider to this city. Electric service reporting in Webb County includes AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative. Those county reports do not identify the electric provider at each Centeno Lane address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric CooperativeElectric utilities reporting service in Webb CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Rio Bravo’s median housing year at 1992; 2 percent of homes were built before 1960, 80 percent from 1960 to 1999 and 18 percent in 2000 or later. A Centeno Lane project could involve an older line replacement or a newer service connection. Before drilling near marked utilities, we use hydrovac potholing to expose them; paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What is near Rio Bravo and La Presa?

Rio Bravo is an incorporated city in Webb County, at an elevation of 392 feet, with 0.65 square miles of land and ZIP code 78046. El Cenizo is 2.5 miles southwest, while La Presa is 4.0 miles northeast. Laredo, the county seat and nearest larger city, is 13.5 miles north. From our Yukon, Oklahoma main office, Rio Bravo is 647 road miles away, a 12.5 hour drive. Those distances matter when planning crew mobilization for a bore near US 83 or a local street.

Places near Rio Bravo

What kinds of bores come up near Margarita Lane in Rio Bravo?

  • Highway crossing: A route beneath US 83 needs a bore plan that accounts for the highway pavement, line type and the TxDOT permit.
  • Water service: A connection near Centeno Lane starts with confirming the water provider for the specific address before the route is set.
  • Fiber route: A fiber bore along Margarita Lane can avoid opening the street surface, with marked utilities exposed before drilling near them.
  • Sewer line: A sewer route near Espejo Molina Road needs a path and size that fit the available access and mapped shallow bedrock.
  • Electric conduit: For Paseo de Tiber Road, we confirm the line owner before planning conduit and check marked utilities along the bore path.
  • Creek or lake approach: A proposed crossing near the Río Grande or O Keefe Lake is checked for Army Corps jurisdiction during planning.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Rio Bravo bore near Paseo de Tiber Road?

For a Rio Bravo quote, start with the address or map pin, such as a location on Paseo de Tiber Road. Tell us what is going in the ground, whether it is water, sewer, gas, electric conduit or fiber, then give the pipe or conduit size and footage. A sketch or plans help show the route, especially if it approaches US 83.

Mobilization starts with the 647 road miles from Yukon, then the ground and route matter: Copita soil and shallow mapped bedrock can affect drilling, while a crossing beneath US 83 brings highway requirements into the plan. Price also reflects pipe size and bore length, marked utilities to expose, pavement or concrete, drainage crossings, pits and excavator time. Access along Paseo de Tiber Road and any emergency timing can change the work needed.

Questions people ask about boring in Rio Bravo

Does Trinity Boring Solutions take Rio Bravo jobs in Webb County, and who staffs them?

Yes, we take directional boring work in Rio Bravo and across Texas. Our own crews and satellite yards run by partner drilling contractors we have vetted support the work, with Trinity handling the project from the first call through the bore log. For a route near US 83, the crew plan follows the job scope.

Does Copita soil in Rio Bravo create a corrosion concern, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 82 percent of Rio Bravo, including areas mapped as Copita soil. The line owner should consider material and protection for steel casing or tracer wire. HDPE is another pipe option and is not affected by that soil corrosion concern; the right choice depends on the line owner’s requirements.

What ground is beneath a Rio Bravo bore in Copita soil?

Copita is mapped across 50 percent of Rio Bravo as fine sandy loam with 0 to 3 percent slopes. At about 40 inches, the USDA soil survey maps bedrock across 50 percent of the city and silt loam across 20 percent. Those mapped layers are not a site test, so the bore plan must allow for changing ground.

How much bedrock is mapped in the top five feet of Rio Bravo?

The USDA soil survey maps bedrock within 60 inches across 65 percent of Rio Bravo, and the mapped bedrock in that area is weathered. Hard bedrock is not mapped within five feet. With typical mapped bedrock depth at 32 inches, a bore may meet rock before reaching its planned depth.

Who approves a Rio Bravo bore beneath US 83?

The utility owner applies for the permit through TxDOT’s RULIS system, and the TxDOT Laredo District reviews work beneath US 83 in Rio Bravo. We prepare the bore plan and profile for an owner’s application to the TxDOT Laredo District for work near US 83. For a crossing beneath US 83 pavement, we account for TxDOT rules requiring boring or tunneling beneath existing highway pavement.

Can a Rio Bravo line be bored beneath the Río Grande?

A bore beneath the Río Grande near Rio Bravo can be considered, but the proposed crossing must be checked for U.S. Army Corps of Engineers jurisdiction during planning. The river is 0.2 miles from the city limits. Site conditions and the proposed route determine the bore plan.

Does Trinity cover El Cenizo and rural sites outside Rio Bravo?

We take work across Texas, including Rio Bravo, nearby El Cenizo and rural sites outside city limits. The job location and route determine crew arrangements and planning. For work near US 83, the highway right of way may also require a TxDOT utility permit filed by the line owner.

How early should I call Texas811 for a bore on Centeno Lane in Rio Bravo?

For a Centeno Lane bore, submit the Texas811 locate request at least two working days before excavation, excluding Saturdays, Sundays and legal holidays. The request can be made no earlier than 14 days before work. If the start slips more than 14 days past the original notice, make a new request; have worn or moved marks refreshed through Texas811.

What affects the cost of directional boring beneath US 83 in Rio Bravo?

The route beneath US 83 can affect permitting, cover and pavement planning, while Rio Bravo’s mapped Copita soil and shallow bedrock affect drilling conditions. Other factors include bore length, pipe size, utility crossings, potholing, pits, pavement, drainage crossings and excavator time. Our mobilization planning reflects the 647 road miles from Yukon to Rio Bravo, shaping how we schedule equipment and materials.

Where the Rio Bravo facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Rio Bravo

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Rio Bravo, Texas

Type the address of your job in Rio Bravo. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Rio Bravo

Same county: Ranchos Penitas West · Pueblo Nuevo · Bruni · Mirando City · Oilton · San Carlos I · Colorado Acres · Ranchitos Las Lomas · San Carlos II · Ranchitos East · Los Arcos · Botines. All counties: Texas county list.