trinityboringsolutions.com

Frankston Texas Directional Boring: Kirvin Soil, Caddo Creek and US 175

Quick Answer: At 315 road miles from Yukon, we take directional boring and horizontal directional drilling (HDD) work in Frankston, including routes near Caddo Creek. Our crews handle the work, with Trinity staying your contact from the first call through the bore log. Kirvin soil and clay mapped below the surface can make a reamer sticky, so the drilling plan matters. A bore beneath US 175 also needs its depth and permit requirements worked out before drilling.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Frankston bores at a glance

  • Incorporated city in Anderson County, Texas. Population 1,136 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 315 miles, about 6.3 hours of driving.
  • Ground: Kirvin soil is mapped on 41 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 46 percent of the area.
  • Highways inside the boundary: US 175, Texas State Highway 155 and FM 19. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Caddo Creek and Cobb Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Caddo Creek in Frankston?

Frankston is 315 road miles from our Yukon, Oklahoma main office, and our crews handle work here with partner contractor satellite yards. The Census Bureau Vintage 2024 estimate puts the town at 1,136 people in Anderson County. A water service, sewer line, gas line, electric conduit or fiber route could follow a property connection near Pine Street or US 175, depending on the address and project.

Our main office is in Yukon, Oklahoma, and Frankston work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a small service near Caddo Creek, our range starts with 3/4 inch service lines and reaches 48 inch casing. We are a family business that started in 1965 and has done directional boring since 1982.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Kirvin soil affect a directional bore in Frankston?

The USDA soil survey maps Kirvin as the leading soil series in Frankston, at 41% of the area. The Kirvin-Sacul association, sloping, covers 36% of mapped land. Fine sandy loam is the most common surface texture, but the layer about 40 inches down is different: clay is mapped across 41%, clay loam across 23%, and sandy clay loam across 19%. Average clay content at that depth is 36%. That clay can cling to a reamer and grip the pipe, so a bore near Pine Street needs a plan for staged reaming and fluid control.

USDA soil survey, inside the Frankston city limitsWhat is mapped
Soil series mappedKirvin 41 percent, Elrose 17 percent, Larue 11 percent, Nahatche 7 percent and Trawick 6 percent
Texture at the surfacefine sandy loam 69 percent, loamy fine sand 17 percent and clay loam 7 percent
Texture about 40 inches downclay 41 percent, clay loam 23 percent and sandy clay loam 19 percent
Engineering class about 40 inches downfat clay (CH) 40 percent, lean clay (CL) 30 percent and clayey sand (SC) 18 percent
Average clay content about 40 inches down36 percent
Bedrock mapped within 60 inches46 percent of the area (0 percent hard rock, 46 percent weathered rock)
Seasonal water table within 60 inches18 percent of the area
Flood prone soils14 percent of the area
High corrosion risk for uncoated steel63 percent of the area

The USDA soil survey maps bedrock within 60 inches across 46% of Frankston, and describes it as weathered rather than hard bedrock. The Queen City Sand geologic unit, of Lutetian age, includes sandstone, siltstone and claystone, so the drill may slow where weathered rock appears. Seasonal water tables are mapped within 60 inches across 18% of the area. Flood prone soils cover 14%, a concern near Caddo Creek. High steel corrosion risk is mapped across 63%, so the line owner should consider protection for steel casing and tracer wire.

How do we bore Frankston clay near Caddo Creek?

Frankston has clay below its fine sandy loam surface, with weathered bedrock and seasonal water also mapped. We adjust fluid, reaming and pit work to the conditions along the route, not just the street name.

  1. With clay mapped about 40 inches down in Frankston, we use a thinner drilling fluid and polymer to limit sticky buildup on the reamer.
  2. The 36% average clay content at that depth supports staged reaming; we aim to pull pipe the same day the hole is opened.
  3. Near Caddo Creek, we plan the bore below the channel and check the crossing for U.S. Army Corps of Engineers jurisdiction during planning.
  4. Before a bore approaches marked utilities on Pine Street, we expose each one with hydrovac potholing, then track and log the drill head from the surface.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

What does a bore have to cross in Frankston near Pine Street?

US 175 runs 2.0 mapped roadway miles inside Frankston, while Texas State Highway 155 covers 2.3 miles and FM 19 covers 0.3 miles. A route along any of them needs to account for the highway right of way. Pine Street is the longest named street at 1.95 miles in town. Reagan Street runs 1.12 miles and Miller Street runs 1.04 miles. Those streets give a useful starting point for locating a bore, but the address and marked utilities set the actual path.

CrossingTypeMapped extentWho has a say
US 175US highway2 roadway miles insideState highway office
Texas State Highway 155State highway2.3 roadway miles insideState highway office
FM 19State highway0.3 roadway miles insideState highway office
Caddo CreekStream0.5 channel miles insideChecked for Corps of Engineers jurisdiction
Cobb CreekStream0.09 channel miles insideChecked for Corps of Engineers jurisdiction
Caney BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Frankston or within 1 mile outside the limits, and no street and rail crossings are mapped in town. Caddo Creek runs 0.5 channel miles through Frankston, and Cobb Creek runs 0.09 miles. Three street crossings of named streams are mapped. A route near Caddo Creek needs a depth plan that stays below the channel, with the crossing checked for U.S. Army Corps of Engineers jurisdiction during planning. No lakes or ponds are mapped within 1 mile.

Who approves a bore under US 175 in Frankston?

For a bore under US 175, the required cover depends on the line: electric and communication lines need 60 inches below the lowest crossed grade, water needs 60 inches, and pressurized sewer needs 60 inches. Along the right of way, electric and communication lines need 48 inches of cover and water needs 36 inches. The TxDOT Tyler District reviews the utility permit. The utility that owns the line files through TxDOT’s online RULIS system, while we prepare the bore plan and profile. Existing highway crossings use boring or tunneling, and a rural highway bore extends beneath all travel lanes. Frankston’s city streets belong to the city. A Caddo Creek crossing also needs a jurisdiction check during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Anderson County near Frankston?

The water provider for a specific Frankston address has to be confirmed with the city, Anderson County or the local water district before a bore is planned. Oncor Electric Delivery Company, Houston County Electric Cooperative and Trinity Valley Electric Cooperative report electric service in Anderson County; that does not establish which one serves a particular address. Before an electric conduit bore near US 175, we confirm the line owner and its conduit requirements so the proposed route matches the right system.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Houston County Electric Cooperative and Trinity Valley Electric CooperativeElectric utilities reporting service in Anderson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Frankston’s median housing year at 1978. The survey estimates that 19% of housing was built before 1960, while 14% dates from 2000 or later. A job on Miller Street could be a replacement route near older services or a new connection for newer housing. We hydrovac pothole every marked utility on the bore path before drilling near it; for example, a marked line under Miller Street must be exposed before the drill approaches.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Do you cover Frankston and nearby Bullard?

Frankston is an incorporated town in Anderson County, at an elevation of 447 feet and with 2.48 square miles of land. ZIP code 75763 serves the town. Berryville is 3.0 miles northeast, Coffee City is 5.2 miles north and Poynor is 5.4 miles west. Bullard, the nearest larger city, is 12.5 miles northeast; Palestine, the county seat, is 22.5 miles south. Our Yukon yard is 315 road miles away, a 6.3 hour drive, so that distance is part of planning work around US 175 and the local streets.

Places near Frankston

What boring work comes up near Reagan Street in Frankston?

  • Highway crossing: A bore beneath US 175 needs a route and depth plan that accounts for the highway grade and travel lanes.
  • Water service: A connection near Pine Street starts with confirming the address water provider and locating marked lines along the proposed path.
  • Fiber route: A fiber bore along Reagan Street can avoid opening pavement, with the route set around exposed utilities and access.
  • Creek crossing: A route beneath Caddo Creek needs channel depth planning and a jurisdiction check before the crossing is designed.
  • Street crossing: A bore beneath Miller Street can leave the pavement uncut, with pits placed in dirt on each side.
  • Property service: A service route off Bizzell Road needs its size, footage, ground conditions and marked crossings checked before the bore is priced.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near Bizzell Road in Frankston?

For a quote near Bizzell Road, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us trace the proposed route. The location matters because a line near Caddo Creek or US 175 may involve different ground, crossings and access than a short service run elsewhere in Frankston.

A short route with clear access and no creek or highway crossing is simpler to plan than a bore under US 175 or near Caddo Creek. Length, pipe or conduit size, clay and weathered rock, marked utilities, pavement, pits and excavator time all affect the scope. Bizzell Road access and the number of lines to expose matter too. At 315 road miles from Yukon, mobilization is part of planning a Frankston job.

Questions people ask about boring in Frankston

Does Trinity Boring Solutions take directional boring work in Frankston, Anderson County?

Yes. We take directional boring work in Frankston, Anderson County, and Trinity stays your contact from the first call through the bore log. Our own crews and satellite yards run by vetted partner drilling contractors handle the field work. The route, such as a service connection near Pine Street, determines the crew plan and equipment.

Is there rock under Frankston, and how much is mapped within five feet?

The USDA soil survey maps weathered bedrock within 60 inches across 46% of Frankston. Hard bedrock is not mapped within that depth. That does not rule out rock deeper down. A route through Kirvin soil may move through clay before the drill reaches weathered rock, which can slow progress and affect steering.

Who approves a Frankston bore under US 175, and which state office reviews it?

The TxDOT Tyler District reviews the utility permit for a bore under US 175. The utility that owns the line submits the application through TxDOT’s RULIS system, and we prepare the bore plan and profile. Cover requirements depend on the line type, so the route and proposed depth are established before the highway work is planned.

Can a utility line be bored under Caddo Creek in Frankston?

A bore under Caddo Creek can be planned, but the route needs to stay below the channel and be checked for U.S. Army Corps of Engineers jurisdiction. The creek runs 0.5 channel miles through Frankston. Ground, access and the utilities near the crossing also shape the bore plan.

Which electric line owner should I contact in Frankston, Anderson County?

The specific line owner depends on the address. Oncor Electric Delivery Company, Houston County Electric Cooperative and Trinity Valley Electric Cooperative report electric service in Anderson County, but that does not identify the provider at every Frankston property. Confirm the line owner and conduit specifications before planning a bore near US 175.

Does Frankston control Miller Street, and can a bore avoid cutting it?

Miller Street is a city street because Frankston is incorporated. Directional boring can place a utility beneath the pavement without opening a trench through the street. We expose marked utilities before drilling near them and place the entry and exit pits in dirt where the route allows.

Does Trinity cover Berryville and rural sites outside Frankston?

Yes. We take work in Berryville and rural locations outside Frankston, as well as in town. Berryville is 3.0 miles northeast of Frankston. A rural route still needs its address or map pin, footage, line size and crossing details so we can plan access and mobilization.

How early should I request a Texas811 ticket for a Frankston bore near Pine Street?

For a bore near Pine Street, request the Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. Texas811 describes that as at least two working days. If the start moves more than 14 days past the notice, make a new request; have worn or moved marks refreshed before work continues.

What affects the cost of directional boring in Frankston under US 175?

The route length, pipe or conduit size, clay or weathered rock, utility crossings, pavement, creek crossings, pits and access all affect the price. A bore under US 175 needs its highway depth and permit plan considered. Work near Caddo Creek may add crossing planning, while the 315 road miles from Yukon affect mobilization.

Where the Frankston facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Frankston

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Frankston, Texas

Type the address of your job in Frankston. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Frankston

Same county: Palestine · Elkhart · Neches. All counties: Texas county list.